481718
39
Zoom out
Zoom in
Previous page
1/76
Next page
38
De Dietrich Gas 310/610 ECO
8.7.4 Other outputs
8.7.5 Analog output
Depending on the option
settings in the service level (see
section 13.2.13), the analog
output signal is able to transmit
the following values: This output
relates to terminals X29-13(+)
and X29-14(-)
8.7.6 Operation signal
As standard the boiler is supplied with internal relays to indicate boiler “Low fire” and boiler on “High fire.
The relay contacts are volt free and close to confirm operation.
For the “boiler Low fire” signal connect to terminals X27-6 and X27-7.
For the “boiler High fire” signal connect to terminals X27-4 and X27-5.
For On/Off signal (regardless of firing position): Set parameter to 60 in the service level access
Contact load:
Maximum voltage: 120 V
Maximum current: 1 A.
8.7.7 Common alarm (Lockout or power ON signal)
Alarm contacts (dry-volt free)
X27.3 (Common) contact
X27.2 (Normally Closed) contact
X27.1 (Normally Open) contact
For alarm indication status (Boiler Lockout or loss of power), connect remote alarm signal
between X27.3 (Common) and X27.2 (Normally Closed)
For Power “ON” indication status (Normal boiler status), connect remote signal between X27.3
(Common) and X27.1 (Normally Open)
See Section 8.7.6 for operating signal indication (Actual boiler firing signal) connections.
8.7.8 External gas valve control
As standard the boiler is supplied with an internal relay that is energized when there is a heat internal
relay that is energized when there is a heat demand, this applies a 120 V supply to terminals X27-15
(live) and X27-14 (neutral). The relay is de-energized when the gas valve multiblock closes at the end of
the heat demand. Additional external interlocks (by others) may be required in a multi boiler installation.
Important!!! This supply cannot be used to control an external gas valve if it supplies other
appliances.
- External gas valve voltage: 120 Volts
- Maximum current: 1 Amp.
Output Signal
[0-10Vdc]
Description
0 Volts
Boiler off - standby
0.5 Volts
Alarm
1.0 Volts
Shut-off
2.0 - 10 Volts
Output between 20 & 100% or Flow temperature
between 68 212°F [20 - 100°C]
table 06 - Analog °output signal
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for De Dietrich Gas 610 ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of De Dietrich Gas 610 ECO in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info