44
EN
6/ LOADING OF REGENERATING SALT
• Loading of regenerating salt (Fig 06)
Important :
Only use special dishwasher regener-
ating salt. Do not use table salt or any type of
cooking salt, this could damage your appli-
ance’s water softener.
Unscrew and remove the stopper on the
salt tank.
Fill the tank with regenerating salt special-
ly designed for dishwashers.
Use the funnel supplied with your dish-
washer. The first time, top up with water up to
the rim of the tank.
•
Regenerating salt indicator:
This illuminates when salt must be added. After
the tank has been filled with regenerating salt,
the indicator light may remain lit until the salt
has dissolved sufficiently, usually after one
cycle (of if the tank has not been filled com-
pletely; for example, when first putting the
machine into service using the sample).
It may be deactivated when using multifunc-
tion tablets (see para.9, Adjusting the set-
tings).
Important
If the salt overflows when filling the tank,
to avoid oxidization of the tub it is advisable to
remove the salt crystals or to run a Prewash
programme (or Rapid programme -
depending on the model).
CC
BB
AA
