To set off the safety system, keep
the knob pressed completely
down for a few seconds after the
flame has lit up.
•
Each burner is controlled by a tap
fitted with a safety device, which
cuts the gas off automatically, if ever
the flame goes out by accident (over-
flowing, drafts, etc.).
•
The safety device for the burners is
in the form of a
metal rod (a thermocouple) beside to
the flame.
•
Your hob is fitted with an automatic
lighting system
integrated into the control knobs.
•
Should there be an electricity cut,
you can always light a burner using a
match and by pressing down on the
control knob at the same time.
•
Choose the ring
you need using the
symbols at the
side of each control
knob; (E.g. back right-
hand burner).
For lighting a burner:
•
Press down on the
control knob and turn
it anti-clockwise to
maximum flame
height. The lighter for
the burner will spark
as long as you keep
the control knob pres-
sed down.
•
Set the flame
height as required.
The gas tap is closed
when in the o position.
Using your hob in all simplicity
42
How to use your gas burners?
- If ever your flame goes out, relight it as per normal procedure.
Sparker
Burner
holder
Natural gas
injector
Burner cover
Thermocouple
(Gas safety device)
Burner
head
- The flames on the burner are smaller near the grate supports to avoid any damage being
done to the enamel.
- The noise made by certain burners is related to their power and burning gas; this does not
harm the quality of cooking in any way.
