38
Installing your hob in all simplicity
Gas connections (Cont'd)
● Possible connections
BOTTLED OR TANKED GAS (BUTANE/
PROPANE
).
For the user's safety, we advise the
connection to be made with a rigid
pipe if this is possible, or with a
reinforced, braided, flexible gas hose
(maximum length 2 metres) (fig. A).
For an existing installation, where
it is not possible to fit a reinforced,
braided, flexible gas hose, the
connection can be made with a
flexible gas hose (maximum length 2
metres), with two jubilee clips: one
on the connector (fig. B), and the
other on the pressure regulator, and a
gas proof washer should be fitted
between the connector and the elbow
seal on the hob.
You will find the sealing washer and
the adaptor in the wallet delivered
with the unit.
BUTANE/PROPANE
Pressure regulator compulsory
propane
butanene
propane
Temperatures above 30°C would cause overheating of the gas hose. To
avoid this, check that there are no heat-producing devices nearby.
Screw on the connector with a torque not exceeding 2.5 m/daN (m/kgF).
Gas proof
washer
(supplied)
Jubilee clip
(supplied)
Jubilee clip
(not sup-
plied)
fig. A
fig. B
Reinforced,
braided, flexible
gas hose with
threaded
connectors
Flexible hose
connection
propane
