35
H05V2V2F - T90
Cross section of
conductors in
mm
2
Fuse
220-240 V~ - 50 Hz
3 conductors of
which 1 is to be
earthed
1
10 A
C
ROSS SECTION OF THE CABLE TO USE
Installing your hob in all simplicity
This hob must be connected to the
220-240 V~ single phrase mains
network using a 2-phase + earth plug
connector (CEI 60083 standard) or an
all-pole cut-off device with a contact
opening distance of at least 3 mm.
Electrical connections
The protective conductor is connected to the earth connection on the hob
and therefore must also be connected to an external earth connection .
If the power supply cable is damaged, it must be replaced with a cable or a special
unit available from the manufacturer or his After Sales Service.
● Gas Hob