32
This appliance should be
installed by a qualified
technician / installer.
Prior to installation, ensure that
the local distribution conditions
(nature of the gas and gas
pressure) and the adjustment
conditions of the appliance are
compatible.
The adjustment conditions are stated
on a label in the wallet and also on
the packaging.
Since this appliance is not connected
to a combustion products evacuation
device, it must be installed in
accordance with current installation
regulations and used in a well-
ventilated place. Particular attention
should be given to the relevant
requirements regarding ventilation.
Installing your hob in all simplicity
On this subject, combustion can take
place only if oxygen from the air is
present, so this air must be
constantly renewed and the
combustion products must be
evacuated (a minimum air input of 2
m3/hour per kw of gas energy is
required).
E.g. :
Total power :
1,5 + 1,5 + 2,3 + 3,1 = 8,4 kW.
8,4 kW x 2 = 16,8 m3/h minimum
airflow.
These hobs have type X protection
(in accordance with standard EN
60.335.2.6) against overheating of
cupboards and Class 3 for installation
itself (in accordance with standard EN
30.1.1).
Fitting recommendations
Width
Depth
Height
Cut-out
Model
56 cm 49 cm
Depending on
cupboard
Outside
dimensions above
the work surface
65 cm 51,8 cm 5 cm
Outside
dimensions below
the work surface.
55 cm 47 cm 5,1 cm