c) Press the programme selection touch control until the "Pyro-clean" programme appears.
Your oven has 3 pyrolysis symbols that correspond to 1 two-hour pyro (Non-
adjustable).
You can select the two other cycles ( 1h45, or 1h30) non-adjustable, by pressing the -
or +.
The oven cannot be used for 2h, 2h 15 or 2h 30. These times allow for cooling down
until the door is automatically unlocked.
d) Press the START/STOP touch control
The door is locked during pyro-cleaning (after about 2 minutes).
You can consult the finishing time for the pyro-clean cycle by pressing touch control
. At
the end of pyro-cleaning the symbol remains lit until the door is automatically unlocked
e) Stop the oven by pressing the START/STOP touch control.
f) Use a damp cloth for removing the white ash after the oven has cooled down.
The oven is now ready for use.
Note: The pyro-cleaning temperature cannot be altered. During the cleaning cycle the
light is switched off. If your oven is still not clean after pyro-cleaning you have delayed
cleaning too long. Repeat the pyro-clean programme.
2) How to programme your pyro-clean to start when you want
Follow the instructions given in the section entitled "How to use the pyro-clean
programme", then:
a) Press touch control , the finishing time for the pyro-clean programme
flashes and the symbol also flashes to show that this time can be modified.
b) Set the time the programme is due to finish by pressing the + or - touch controls.
.
Example: End of the pyro-clean programme at 5h00.
When the pyro-clean programme is over, press the START/STOP touch control.
25