481679
30
Zoom out
Zoom in
Previous page
1/148
Next page
0
- ELECTRICAL HOOK UP OF THE HOOD
This appliance is fitted with an H05 VVF 3 conductor, 0.75 mm2 (neutral, phase, and
ground) power cable. This can be hooked up to a 220 – 240 V mono-phase electrical net-
work by way of a CEI 60083 regulation power socket that must remain accessible after
installation, in conformity to installation regulations.
We decline all responsibility in case of accident caused by a lack of ground connection
or incorrect ground connection. The fuse used must be 10 or 16 A. If the power cable is
damaged, call the after-sales service to avoid any risk.
Attention:
If the hood presents some form of anomaly, unplug the appliance or remove the fuse corre-
sponding to the appliance’s power line.
Insert the pins into the holes (Fig. .1 – A) and screw the plate to the ceiling (Fig. .1 - B).
Then fix the lower structure (Fig. 6.) to the hood so that the holes meet up with the metric
screws welded to the fan support (Fig. 6.1). Insert the washers and nuts provided (Fig. 6.-A)
and tighten them using a suitable tool.
Join the air outlet pipe to the motor unit using a collar. Fit the top structure (Fig. 6.) into the
bottom structure and at the same time, adjust its position according to the required height
and above all to the minimum height necessary between the cook top and the hood. Secure
the two structures with screws (Fig. 6. B).
Then lift the hood with the structure and pipes already inserted until the four screws (Fig. 6.6
–E) hook onto the bottom structure (Fig. 6.C). Once the two parts have connected, fasten
them into place (Fig. .1, Fig. .) using the lock screws (Fig. .A).
Connect the hood pipe to the air exhaust opening.
Then insert the two telescopic pipes (Fig. 6. and 6.) into the bottom part of the hood; lift
the pipe completely and secure it to the hood with the screws provided (Fig. 10)- Raise the top
pipe as far as the ceiling and screw it into place (Fig. 6.6 –D).
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for De Dietrich DHD789X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of De Dietrich DHD789X in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info