481689

De Dietrich DED1140X Manual

18
Zoom out
Zoom in
Previous page
1/25
Next page
22
"CHANGING THE QUANTITY OF COFFEE IN THE
CUP" section.
Programming cappuccino
For instructions on programming cappuccino,
see the "CHANGING THE QUANTITY OF MILK
AND COFFEE FOR CAPPUCCINO" section.
Programming water
For instructions, see the "CHANGING THE QUAN-
TITY OF HOT WATER" section.
Descaling
Important!
Descaler contains acids. Re-
spect the safety warnings provided by the manu-
facturer and given on the descaler pack.
N.B.!
Use the descaler recommended by
the manufacturer only. Use of other descalers in-
validates the guarantee. Failure to descale the ap-
pliance as described also invalidates the
guarantee.
Important!
Before descaling, make sure
the water softener filter has been removed.
When "PLEASE DESCALE !" is displayed, the ma-
chine requires descaling.
Proceed as follows:
• Make sure the machine is ready;
• Attach the hot water spout (C7) to the nozzle
(A10).
• Press the SET icon (B2) to enter the menu
and then the icons (B7) and (B8) until
"DESCALE" is displayed.
• Press the OK icon (B9) and the appliance di-
splays "DESCALE PLEASE CONFIRM".
• Press the OK icon (B9). The message "ADD
DESCALER PLEASE CONFIRM" is displayed.
• Empty the tank of water, pour the contents of
the descaler bottle into the tank respecting
the instructions given on the descaler pack,
then add water up to the MAX level marked
on the water tank.
Position a container with a capacity of about
2 litres under the hot water spout.
• Press the OK icon (B9). Descaler flows out
of the hot water spout into the container
below.
The appliance displays: "DESCALING".
• The descale programme automatically per-
forms a series of deliveries and pauses.
• After about 30 minutes "DESCALE COM-
PLETE PLEASE CONFIRM" is displayed.
• Press the OK icon (B9). "RINSING PLEASE
CONFIRM" is displayed.
• Empty the water tank, rinse to eliminate de-
scaler residues, then fill with clean water.
• Replace the tank full of clean water. "RINSING
PLEASE CONFIRM" is displayed again.
• Press the OK icon (B9) again. Hot water
flows out of the spout into the container
below and "RINSING" is displayed.
• Wait until "RINSING COMPLETE PLEASE
CONFIRM" is displayed.
• Press the OK icon (B9). "DESCALE COM-
PLETE" is displayed, then "FILL TANK". Fill the
tank again with clean water.
• The descale programme is now terminated
and the appliance is ready to make coffee
again.
NOTE: If descaling is interrupted before com-
pletion, the process must be begun again
from the beginning.
Important!
FAILURE TO DESCALE THE
APPLIANCE REGULARLY INVALIDATES THE
GUARANTEE.
Resetting default values (reset)
If you change the original values, the default va-
lues can be reset as follows:
• Press the SET icon (B2) to enter the menu
and then the icons (B7) and (B8) until
"RESET TO DEFAULT" is displayed.
• Press the OK icon (B9) and the appliance di-
splays "RESET TO DEFAULT PLEASE CON-
FIRM".
• Press the OK icon (B9) to reset the default
values.
EN
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for De Dietrich DED1140X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of De Dietrich DED1140X in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info