PROBLEM POSSIBLE CAUSE REMEDY
TROUBLESHOOTING
Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact Customer Services.
The coffee is not hot • The cups were not pre-
heated.
• The brewing unit has coo-
led down because 2/3 mi-
nutes have elapsed since
the last coffee was made.
• The temperature set is too
low.
• Warm the cups by rinsing
them with hot water.
• Before making coffee,
preheat the brewing unit
by pressing the icon
(B3).
• Change the set tempera-
ture (see paragraph
"Changing coffee tempe-
rature").
The coffee is not creamy
enough
• The coffee is ground too
coarsely.
• Wrong type of coffee
• Turn the grinding adju-
stment knob one click an-
ticlockwise towards "1"
while the coffee mill is in
operation (fig. 14).
• Use a type of coffee for
espresso coffee makers.
The coffee is delivered too
slowly or a drop at a time.
• The coffee is ground too
finely.
• Turn the grinding adju-
stment knob one click
clockwise towards "7"
while the coffee mill is in
operation (fig. 14).
Continue one click at a
time until coffee delivery
is satisfactory.
The effect is only visible
after delivering two cof-
fees.
27
EN
