562605
15
Zoom out
Zoom in
Previous page
1/46
Next page
.
NOTE
The telephone must be switched to tone setting (not pulse) for the DV-2010 to
operate properly.
Step 4. Connect a straight-through Ethernet cable from your PC and STB to the 10/100 PC
RJ-45 LAN port and STB ports on DV-2010.
CAUTION
LAN port 1 and 2 are only dedicated for STB. So do not connect PC to these
ports. PC can only connect to LAN 3 and 4 port for the Internet.
Step 5. Insert the power adaptor cable into the power connector on the DV-2010.
WA R NI N G
Use only supplied power adaptor
Step 6. Connect the plug end of the 12V DC power adaptor cord into an electrical power
outlet.
Step 7. When the DV-2010 is properly connected and powered up, the green power (PWD)
lights and the green status (STS) LED flashes to indicate that DV-2010 is in initial
processing.
CAUTION
Do not cover or block the air vents on either the top or the bottom surface of DV-
2010 when IAD is in horizontal location. Overheating can cause permanent
damage to the IAD
.
NOTE
Power LED and INET LED are orange color blinking at the same time when IAD
is on software downloading process.
1.3 Cable connection
After the equipment is in place, see Figure 1 how to connect cable to the rear of the DV-2010.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Davolink DV-2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Davolink DV-2010 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info