562605
14
Zoom out
Zoom in
Previous page
1/46
Next page
(7) Check the electric quality, especially when the device is located by a big motor
(8) Be sure all ventilation chambers are not obstructed at all times.
(8) Do not put on heavy equipment and machinery on the system.
(9) Keep away from IAD at least 5cm in normal condition.
Instruction
Read the manual before you connect the system to its power source
1.2 Hardware Installation Procedure
The DV-2010 includes the following items.
- Two Analog Telephone Line and four 10/100Base-T Ethernet Cables
- User Guide
- A strut and an Wi-Fi antenna
- A splitter
- 12V power Adaptor
1.2.1 DV-2010 Installation steps
After the equipment is in place, see Figure 2 and follow the next procedure to install the
DV-2010.
Step 1. Connect one end of a telephone line cord into the wall jack and plug the other end to
the LINE input on the rear of the splitter.
Step 2. Connect one end of a telephone line cord into the PC of the splitter and plug the other
end to the ADSL input on the rear of DV-2010.
Step 3. Connect one end of a telephone line cord to the TEL input on the rear panel of the
IAD. Connect the other end to an analog telephone set
CAUTION
Connect the TEL port to a telephone only, never to a telephone wall jack
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Davolink DV-2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Davolink DV-2010 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info