Manual Davis VANTAGE VUE (page 33 of 56) (English)

552859

Zoom out

Zoom in

1/56

Calibrating, Setting, and Clearing Variables

• Monthly ET— Sets the current month’s ET. Does not affect yearly total.

• Yearly ET — Sets the current year’s total ET.

To set a weather variable’s value:

1. Select the variable you wish to change (either RAIN or ET).

2. Press and release 2ND, then press and hold SET. The variable blinks.

3. Keep holding SET until all digits are lit and stop flashing. Release SET; only one digit is

now blinking.

4. Press the < or > keys to select digits in the value.

5. Press the + and - keys to add to or subtract from the selected digit.

6. When you are finished, press DONE to exit.

Clearing Weather Variables Accumulations Calibrations

The following weather variables can be cleared:

• Wind Direction—Clears the wind direction calibration.

• Barometer — Clears any pressure offset used to calibrate the station.

Note: Clearing the barometric pressure offset value also clears the elevation setting in Setup Mode.

See “Screen 10: Elevation” on page 11.

• Daily rain—Clearing the daily rain value is reflected in the daily rain total, the last 15

minutes of rain, the last three hours of rain sent to the forecast algorithm, the umbrella

icon, and the monthly and yearly rain totals. Clear the daily rain total if the station acci-

dentally recorded rain when the ISS was installed or after routine cleaning and mainte-

nance.

• Monthly rain — Clears the monthly rain total. Does not affect the yearly rain total.

• Yearly rain — Clears the yearly rain total.

• Daily ET — Clears daily ET and subtracts the old daily ET total from the monthly and

yearly ET totals.

• Monthly ET — Clears the current monthly ET total. Does not affect the yearly ET total.

• Yearly ET — Clears the current yearly ET total.

• Heating and Cooling Degree Days— Clears the accumulated degree day total.

To clear a single weather variable:

1. Select the weather variable. (For degree days, select outside temperature, press WxCtr until

degree days is displayed.)

2. Press and release 2ND, then press and hold CLEAR.

The variable you’ve chosen blinks. Keep holding CLEAR until

the value changes to zero or, in the case of the barometer, the raw

barometer value.

Clear All Command

This command clears all stored high and low weather data, including monthly and yearly

highs and lows, and clears alarm settings all at once.

1. Press WIND, making sure wind speed is displayed.

2. Press 2ND then press and hold CLEAR for at least six seconds.

3. Release CLEAR when “CLEARING NOW” displays at the bottom of the screen.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Davis VANTAGE VUE in the language / languages: English as an attachment in your email.

The manual is 6,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Davis VANTAGE VUE

Davis VANTAGE VUE Installation Guide - English - 16 pages

Davis VANTAGE VUE Quick start guide - German - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Davis VANTAGE VUE Manual

Product: