552859
32
Zoom out
Zoom in
Previous page
1/56
Next page
Calibrating, Setting, and Clearing Variables
28
Calibrating Barometric Pressure
Before calibrating the barometric pressure, be sure the station is set to the correct elevation.
See “Screen 10: Elevation” on page 11 for more information. Find the nearest source of
barometric pressure, such as a local airport, to get a current barometric pressure.
1. Press BAR to select barometric pressure.
2. Press and release 2ND, then press and hold SET. The barometric pressure variable blinks.
3. Continue holding SET until the Weather Center reads “SET BAR”.
4. Press the < and > keys to select digits in the variable.
5. Press + and - keys to add to or subtract from the digit’s value.
6. Press DONE to exit calibration.
Calibrating Rain
The Rain Error in Percent refers to the measuring error of your rain collector. To set the rain
error percentage, first determine the percentage of error, then:
1. Enter Setup Mode by pressing 2ND and then SETUP.
2. Press DONE multiple times until Screen 13: Rain Collector displays. (See “Screen 13: Rain
Collector” on page 12 for more information.)
3. Press and release 2ND and then
press and release SET to display
the RAIN ERROR IN PERCENT
screen.
4. Enter the error. Enter a negative number if your station is under reporting; enter a positive
number if it is over reporting. For example, if your station is low by 2%, enter -2. If your
station is high by 4%, enter 4. Press the + and - keys to add or subtract from the percent
amount. The Rain Error Percentage range is -25 to 25 percent. (Not all corrections are
available, so you may have to choose the closest one.)
5. Press and hold DONE to save the setting and exit Setup Mode.
Note: This calibration will not retroactively affect past rain totals. It will only affect future rain data.
Setting Weather Variables
Setting a weather variable allows you to manually enter a total for that weather variable that
accrued prior to installation of your weather station.
You can set values for the following weather variables:
Daily Rain — Sets the daily rain total. Monthly and yearly rain totals are updated.
Monthly Rain — Sets the total rain for the current month. Does not affect the yearly rain
total.
Yearly Rain — Sets the current year’s rain total.
Daily ET (Evapotranspiration) — Sets the daily ET total. Monthly and yearly ET totals
are updated.
Rain Error in Percent
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Davis VANTAGE VUE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Davis VANTAGE VUE in the language / languages: English as an attachment in your email.

The manual is 6,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Davis VANTAGE VUE

Davis VANTAGE VUE Installation Guide - English - 16 pages

Davis VANTAGE VUE Quick start guide - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info