585987
18
Zoom out
Zoom in
Previous page
1/20
Next page
Installation Manual Rhino™ 10
1.
Press Power to suspend the Rhino™ 10.
2. Disconnect the power cable.
3. If you have an external antenna, remove the right antenna.
4. Unscrew the four hex head screws from the right top cover and gently remove the cover. If you have an
external antenna, do NOT remove the antenna cable; simply let it hang on the unit. Make sure you
keep all of the screws.
5. Select the voltage required for each serial port by moving the jumper between common and 5 volt or 12
volt pin. If no voltage is required, either remove the jumper, or connect it in a vertical orientation to the
center pin only. Factory default is 5V on both COM 1 and COM 2.
6. Replace the top cover, and attach it with the four screws you removed in Step 2. Lightly tighten with
even torque on all four screws.
Figure 14 – Serial Port Voltage Jumpers
Increasing Memory Storage
You can use an SD or SDHC card to increase file storage and install software. The Rhino™ 10 currently supports
SDHC cards that hold up to 32 GB of information. The SD card slot is located on the top of the Rhino™ 10 under the
left top cover. You must remove the top cover using a 1/16” Allen driver to access the SD card slot.
This operation requires an ESD protected workstation!
Failure to pre
vent ESD damage may void the warranty. If in doubt, have an authorized Datalogic Partner
perform this installation for you.
Inserting an SD card
1. Press Power to suspend the Rhino™ 10.
2. Disconnect the power cable.
3. If you have an external antenna, remove the left antenna.
4. Unscrew the four hex head screws from the left top cover and gently remove the cover. If you have an external
antenna, do NOT remove the antenna cable. Simply let it hang on the unit. Make sure you keep all of the
screws.
14
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Datalogic Rhino 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Datalogic Rhino 10 in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Datalogic Rhino 10

Datalogic Rhino 10 User Manual - English - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info