Manual Datalogic QuickScan QD2430 (page 12 of 48) (English)

535590

Zoom out

Zoom in

1/48

Selecting the Interface Type

8 QuickScan™ QD2430

A beam illuminates the label. The projected pattern of the

aiming system will be smaller when the reader is closer to the

bar code and larger when it is farther from the code. Symbol-

ogies with smaller bars or elements (mil size) should be read

closer to the unit. Symbologies with larger bars or elements

(mil size) should be read farther from the unit.

If the aiming system is centered you will get a good read. Suc-

cessful reading is signaled by an audible tone plus a good-read

green spot LED indicator.

Reference the QuickScan QD24XX Product Reference Guide

(PRG) on the Datalogic website for more information about

this feature and other programmable settings.

Selecting the Interface Type

Upon completing the physical connection between the reader

and its host, proceed directly to Interface Selection below for

information and programming for the interface type the read-

er is connected to (for example: RS-232, Keyboard Wedge,

USB, etc.) and scan the appropriate bar code to select your sys-

tem’s correct interface type.

Interface Selection

The reader model will support one of the following sets of host

interfaces:

General Purpose Models:

RS-232, RS-232 OPOS, USB, Key-

board Wedge.

Retail Point of Sale Models :

RS-232, RS-232 OPOS, USB.

Information and programming options for each interface type

are provided in this section. For defaults and additional infor-

mation associated with each interface, proceed to the corre-

sponding chapter in the QuickScan QD2430 PRG.

I am using QD 2430 with L18ER rs 232 Communication.
After Power cycle once it will scan after that it will start the blinking and not scan other barcode to scan it need to take again power cycle. Submitted on 24-1-2020 at 16:46
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Datalogic QuickScan QD2430 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Datalogic QuickScan QD2430 Manual

Product: