Manual Datalogic QuickScan QD2430 (page 11 of 48) (English)

535590

Zoom out

Zoom in

1/48

QuickScan™ QD2430

General Purpose Corded

Handheld Area Imager

Bar Code Reader

Quick Reference Guide

Datalogic ADC, Inc.

959 Terry Street

Eugene, OR 97402

USA

Telephone: (541) 683-5700

Fax: (541) 345-7140

tents of this documentation or the procedures described

therein may be reproduced or transmitted in any form or by

any means without prior written permission of Datalogic ADC,

Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic

ADC”). Owners of Datalogic products are hereby granted a

non-exclusive, revocable license to reproduce and transmit

this documentation for the purchaser's own internal business

purposes. Purchaser shall not remove or alter any proprietary

notices, including copyright notices, contained in this docu-

mentation and shall ensure that all notices appear on any

reproductions of the documentation.

Should future revisions of this manual be published, you can

acquire printed versions by contacting your Datalogic repre-

sentative. Electronic versions may either be downloadable

from the Datalogic website (www.datalogic.com) or provided

on appropriate media. If you visit our website and would like

to make comments or suggestions about this or other Data-

logic publications, please let us know via the "Contact Data-

logic" page.

Disclaimer

Datalogic has taken reasonable measures to provide informa-

tion in this manual that is complete and accurate, however,

Datalogic reserves the right to change any specification at any

time without prior notice.

Datalogic and the Datalogic logo are registered trademarks of

Datalogic S.p.A. in many countries, including the U.S.A. and

the E.U. All other brand and product names may be trade-

marks of their respective owners.

Patents

This product may be covered by one or more of the following

patents:

EP996284; EP997760; EP999514; EP1128315; EP1396811;

EP1413971; EP1828957; JP4435343B2; US5481098;

US6478224; US6512218; US6513714; US6561427; US6808114;

US6997385; US7053954; US7075663; US7234641; US7387246;

US7721966.

Additional patents pending.

Table of Contents

Software Product Policy .............................................................................4

Customers Under Software Support ..........................................4

Description .....................................................................................................5

Setting Up the Reader ................................................................................6

Connect/Disconnect Cable to Reader ........................................6

Using the Quickscan™ QD24XX ...............................................................7

Selecting the Interface Type .....................................................................8

Interface Selection ............................................................................8

Configuring the Interface .................................................... 9

Keyboard Interface.............................................................. 10

Scancode Tables .................................................................. 13

Country Mode....................................................................... 13

Caps Lock State .................................................................... 17

Numlock.................................................................................. 18

Programming ..............................................................................................19

Using Programming Bar Codes .................................................19

Configure Other Settings .............................................................19

Resetting Product Defaults .........................................................19

Reading Parameters .................................................................................20

Aiming System ................................................................................20

Good Read Green Spot Duration ..............................................20

Operating Modes ......................................................................................21

Scan Mode ........................................................................................21

Pick Mode .......................................................................................... 23

Multiple Label Reading ................................................................23

Technical Specifications ..........................................................................24

LED and Beeper Indications ................................................................... 27

Error Codes ..................................................................................................30

Cleaning ........................................................................................................31

Regulatory Information ...........................................................................32

Statement of Agency Compliance ........................................... 32

FCC Class B Compliance Statement .........................................32

Canadian Notice ..............................................................................33

Power Supply ...................................................................................33

Imager Labeling .............................................................................. 34

WEEE Statement .............................................................................35

Datalogic ADC Limited Factory Warranty ..............................37

Ergonomic Recommendations .............................................................39

Services and Support ...............................................................................40

NOTES

Quick Reference Guide 1

Datalogic ADC, Inc.

QUICKSCAN™ PRODUCT SERIES

END USER LICENSE AGREEMENT

Notice to End User: The Datalogic Product you have acquired contains embedded

Software, which is integral to the product's operation. This Software is being provided

to you under license, subject to the terms and conditions of this Agreement. If you use

the Datalogic Product, you will be deemed to have accepted the terms and conditions

of this Agreement. If you do not intend to be bound to the terms of this Agreement,

Datalogic is not willing to license the Software to you, you may not use the Datalogic

Product or the Software, and you must contact the party from whom you acquired the

Datalogic Product for instructions.

This End User Software License Agreement ("Agreement") is a legally binding agree-

ment governing the licensing of the Software and Documentation by Datalogic ADC,

Inc. and its Affiliates ("Datalogic") to the entity or person who has purchased or other-

wise acquired a Datalogic Product ("End User"). For purposes of this Agreement, any

software that is associated with a separate end-user license agreement is licensed to

you under the terms of that license agreement. Datalogic and End User hereby agree

as follows:

1. Definitions

1.1 "Affiliate" means a business entity currently existing or later acquired that controls,

is controlled by, or is under common control with Datalogic S.p.A.

1.2 "Documentation" means materials such as user's guides, program reference

guides, quick reference guides, manuals, or similar materials associated with or

related to the Datalogic Product, whether in printed, "online", or other form.

1.3 "Proprietary Information" means: (a) source code, object code, software, docu-

mentation, and any related internal design, system design, data base design,

algorithms, technology, technical data or information, implementation tech-

niques, and trade secrets related to the Software, (b) any other trade secrets

marked appropriately or identified as proprietary or confidential, and (c) any

information that End User, under the circumstances, should recognize as confi-

dential. Proprietary Information does not include any information that the receiv-

ing party can establish was (1) in the public domain, (2) already in the receiving

party's possession or rightfully known prior to receipt, (3) rightfully learned from

a third party not in violation of any other's proprietary rights, or (4) inde-

pendently developed without access to Proprietary Information.

1.4 "Datalogic Product" means the Datalogic® QuickScan™ series scanner product,

including all embedded Software in and all Documentation related to such prod-

uct, which has been purchased or otherwise acquired by End User, whether

obtained directly or indirectly from Datalogic.

1.5 "Software" means any software or computer programs of Datalogic or its third

party licensors in machine readable form which is embedded in the Datalogic

Product, whether obtained directly or indirectly from Datalogic, including any

replacement, update, upgrade, enhancement or modification.

2. Scope Of License Granted

2.1 Datalogic grants to End User a non-exclusive, non-transferable, perpetual license

to use the Software, solely on the Datalogic Product in which it is embedded

("designated Datalogic Product"), in machine-readable form only, solely for End

User's internal business purposes. This Agreement does not convey ownership of

the Software to End User. Title to the Software shall be and remain with Datalogic

or the third party from whom Datalogic has obtained a licensed right. As used in

this Agreement, the term "purchase" or its equivalents when applied to the Soft-

ware shall mean "acquire under license." End User is not entitled to receipt or use

of the source code to any Software.

2.2 End User shall not copy, modify, decompile, disassemble, reverse engineer, or

otherwise reproduce or remanufacture the Software, whether modified or

unmodified, nor sell, assign, sublicense, distribute, lend, rent, give, or otherwise

transfer the Software to any other person or organization, for purposes other

than as expressly provided in this Agreement, without Datalogic's prior written

consent.

3. Transfers, Support

3.1 Any copying, installing, reproduction, remanufacture, reverse engineering, elec-

tronic transfer, or other use of the Software on other than the designated Data-

logic Product will be a material breach of this Agreement. However, Datalogic

may elect not to terminate this Agreement or the granted licenses, but instead

2 QuickScan™ QD2430

may elect to notify End User that End User is deemed to have ordered and

accepted a license for each breaching use. End User shall pay Datalogic the appli-

cable list price for such licenses as of the date of such breach.

3.2 End User shall not sell, assign, sublicense, distribute, lend, rent, give, or otherwise

transfer the Datalogic Product to any third party unless such third party agrees

with Datalogic in writing to be bound by the terms and conditions of this Agree-

ment. Any such transfer of the Datalogic Product absent such agreement shall be

null and void.

3.3 End User may obtain support for Software from Datalogic at Datalogic's standard

support fees and under Datalogic's standard support terms and conditions in

effect at the time the support is requested.

4. Intellectual Property

End User acknowledges that the Software constitutes valuable trade secrets of Data-

logic or Datalogic's third party licensors and that the Software is protected by intellec-

tual property laws and treaties. The license set forth in this Agreement does not

transfer to End User any ownership of Datalogic's or its third party licensors' copy-

rights, patents, trademarks, service marks, trade secrets, or other intellectual property

rights and End User shall have no right to commence any legal actions to obtain such

rights. End User shall not remove, modify, or take any other action that would obscure

any copyright, trademark, patent marking, or other intellectual property notices con-

tained in or on the Datalogic Product.

5. Proprietary Information

5.1 End User acknowledges that Proprietary Information is the confidential, propri-

etary, and trade secret property of Datalogic and Datalogic's third party licensors

and End User acquires no right or interest in any Proprietary Information.

5.2 End User shall not disclose, provide, or otherwise make available the Proprietary

Information of Datalogic or its third party licensors to any person other than End

User's authorized employees or agents who are under confidentiality agreement,

and End User shall not use the Proprietary Information other than in conjunction

with use of the Datalogic Product exclusively for End User's internal business pur-

poses. End User shall take steps to protect the Proprietary Information no less

securely than if it were End User's own intellectual property.

5.3 The provisions of this Proprietary Information Section shall survive and continue

for five (5) years after the termination of this Agreement.

6. Limited Warranty

6.1 Datalogic warrants that, under normal use and operation, the Datalogic Product

will conform substantially to the applicable Documentation for the period speci-

fied in the Documentation. During this period, for all reproducible nonconformi-

ties for which Datalogic has been given written notice, Datalogic will use

commercially reasonable efforts to remedy nonconformities verified by Data-

logic. End User agrees to supply Datalogic with all reasonably requested informa-

tion and assistance necessary to help Datalogic in remedying such

nonconformities. For all defects reported to Datalogic within the warranty period,

Datalogic's liability is limited to providing End User with one copy of corrections

or responding to End User's problem reports according to Datalogic's standard

assistance practices. Datalogic does not warrant that the product will meet End

User's requirements or that use of the product will be uninterrupted or error free,

or that Datalogic's remedial efforts will correct any nonconformance. This limited

warranty does not cover any product that have been subjected to damage or

abuse, whether intentionally, accidentally, or by neglect, or to unauthorized

repair or unauthorized installation, and shall be void if End User modifies the

product, uses the product in any manner other than as established in the Docu-

mentation, or if End User breaches any of the provisions of this Agreement.

6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC PRODUCT IS PRO-

VIDED "AS IS" AND DATALOGIC MAKES NO WARRANTIES OF ANY KIND, EXPRESS

OR IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT, AND SPECIFI-

CALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-

NESS FOR A PARTICULAR PURPOSE.

7. Infringement

7.1 Datalogic will defend End User against any claim in a lawsuit that the Datalogic

Product furnished hereunder infringe a United States patent or copyright of a

third party and Datalogic will pay any damages finally awarded against End User

by a court of competent jurisdiction that are attributable to such claim or will pay

End User's part of any settlement that is attributable to such claim, provided, that

Quick Reference Guide 3

1) End User notifies Datalogic promptly in writing of the claim, 2) Datalogic con-

trols the defense or settlement of the claim, and 3) End User cooperates fully with

Datalogic in such defense or settlement. All notices of a claim should be sent to

Datalogic ADC, Inc., Legal Department, 959 Terry Street, Eugene, OR 97402.

7.2 In the defense or settlement of any such claim, Datalogic may, at its option, 1)

procure for End User the right to continue using the Datalogic Product, 2) modify

the Datalogic Product so that it becomes non-infringing, 3) replace the Datalogic

Product with an equivalent product not subject to such claim, or 4) provide End

User an opportunity to return the Datalogic Product and receive a refund of the

purchase price paid, less a reasonable allowance for use.

7.3 Datalogic shall have no liability to End User for claims of infringement based

upon 1) the use of any Datalogic Product in combination with any product which

Datalogic has not either furnished or authorized for use with such Datalogic

Product 2) the use of any Datalogic Product designed, manufactured, or modified

to the specifications of End User, or 3) End User's modification of the Datalogic

Product without written authorization from Datalogic.

7.4 THE FOREGOING STATES DATALOGIC'S COMPLETE AND ENTIRE OBLIGATION CON-

CERNING CLAIMS OF PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY

INFRINGEMENT, CANCELS AND SUPERCEDES ANY PRIOR AGREEMENTS,

WHETHER ORAL OR WRITTEN, BETWEEN THE PARTIES CONCERNING SUCH

CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CONTEMPO-

RANEOUS, OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE PARTIES,

WHETHER ORAL OR WRITTEN, EXCEPT AS SET FORTH IN A FUTURE WRITING

SIGNED BY BOTH PARTIES.

8. Limitation Of Liability

EXCEPT AS PROVIDED IN SECTION 7, DATALOGIC SHALL NOT BE LIABLE FOR ANY CLAIMS

AGAINST END USER BY ANY OTHER PARTY. IN NO EVENT SHALL DATALOGIC'S LIABILITY

FOR DAMAGES, IF ANY, WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLI-

GENCE), PRODUCT LIABILITY, STRICT LIABILITY, WARRANTY, OR ANY OTHER BASIS,

EXCEED THE PRICE OR FEE PAID BY END USER FOR THE DATALOGIC PRODUCT. UNDER NO

CIRCUMSTANCES SHALL DATALOGIC BE LIABLE TO END USER OR ANY THIRD PARTY FOR

LOST PROFITS, LOST DATA, INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY OTHER

SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL, PUNITIVE, EXEMPLARY,

OR OTHER SIMILAR DAMAGES, EVEN IF DATALOGIC HAS BEEN ADVISED OF THE POSSIBIL-

ITY OF SUCH DAMAGES.

9. Government Restricted Rights; International Use

9.1 Use, duplication, or disclosure of the Software by the U.S. Government is subject

to the restrictions for computer software developed at private expense as set

forth in the U.S. Federal Acquisition Regulations at FAR 52.227-14(g), or 52.227-19

or in the Rights in Technical Data and Computer Software clause at DFARS

252.227-7013(c)(1)(ii), whichever is applicable.

9.2 If End User is using the Datalogic Product outside of the United States, End User

must comply with the applicable local laws of the country in which the Datalogic

Product is used, with U.S. export control laws, and with the English language ver-

sion of this Agreement. The provisions of the "United Nations Convention on

International Sale of Goods" shall not apply to this Agreement.

10. Termination

10.1 Either party may terminate this Agreement or any license granted under this

Agreement at any time upon written notice if the other party breaches any provi-

sion of this Agreement.

10.2 Upon termination of this Agreement, End User immediately shall cease using any

nonembedded software and shall return to Datalogic or destroy all non-embed-

ded software covered by this Agreement, and shall furnish Datalogic with a certif-

icate of compliance with this provision signed by an officer or authorized

representative of End User. For embedded software, End User agrees to sign a

waiver prepared by Datalogic concerning further use of the embedded Software.

End User's resumed or continued use of the embedded Software after termina-

tion shall constitute End User's agreement to be bound by the terms and condi-

tions of this Agreement for such use.

11. General Provisions

11.1 Entire Agreement; Amendment. This document contains the entire agreement

between the parties relating to the licensing of the Software and supersedes all

prior or contemporaneous agreements, written or oral, between the parties con-

cerning the licensing of the Software. This Agreement may not be changed,

amended, or modified except by written document signed by Datalogic.

Software Product Policy

4 QuickScan™ QD2430

11.2 Notice. All notices required or authorized under this Agreement shall be given in

writing, and shall be effective when received, with evidence of receipt. Notices to

Datalogic shall be sent to the attention of Contract Administration, Datalogic

ADC, Inc., 959 Terry Street, Eugene, OR 97402, or such other address as may be

specified by Datalogic in writing.

11.3 Waiver. A party's failure to enforce any of the terms and conditions of this Agree-

ment shall not prevent the party's later enforcement of such terms and condi-

tions.

11.4 Governing Law; Venue: This Agreement and the rights of the parties hereunder

shall be governed by and construed in accordance with the laws of the State of

Oregon U.S.A, without regard to the rules governing conflicts of law. The state or

federal courts of the State of Oregon located in either Multnomah or Lane coun-

ties shall have exclusive jurisdiction over all matters regarding this Agreement,

except that Datalogic shall have the right, at its absolute discretion, to initiate

proceedings in the courts of any other state, country, or territory in which End

User resides, or in which any of End User's assets are located.

11.5 Attorneys' Fees. In the event an action is brought to enforce the terms and condi-

tions of this Agreement, the prevailing party shall be entitled to reasonable attor-

neys' fees, both at trial and on appeal.

- END -

Software Product Policy

Datalogic reserves the right to ship its products with the latest

version of software/firmware available. This provides our cus-

tomers with the very latest in Datalogic software technology.

The only exception to this policy is when the buyer has a

signed contract with Datalogic that clearly defines the terms

and conditions for making software/firmware changes in

products shipped to the buyer.

Customers Under Software Support

Customers that elect to subscribe to Datalogic Software Main-

tenance and Support Agreement will receive 30 days advance

notification of: (1) the release of a new software version; and/

or (2) discontinuation of any prior software version that will

no longer be supported. Datalogic will provide maintenance

for a fee that will assist customers in transitioning to the next

software version. If a customer is currently using the software

version being discontinued, the customer may elect to transi-

tion to any one of the newer versions, depending on the hard-

ware in use.

To arrange for a Software Maintenance and Support Agree-

ment please contact your Datalogic sales person.

Quick Reference Guide 5

QuickScan™ QD2430

Description

The QuickScan™ QD2400 2D imager has been specifically

created to meet the market demand for omni-directional read-

ing performance on virtually all codes at an affordable price.

Elegant design details are incorporated into a smaller, balanced

lightweight enclosure without sacrificing Datalogic's well-

known durability.

Ideally suited for applications at the point-of-sale (POS), the

QuickScan QD2400 imager features a new illumination and

aiming system developed with the unique intent to reduce vi-

sual stress of the operator during the daily scanning activities.

It consists of a soft, dark red illumination combined with two

blue LED triangles pointing at the targeted bar code. The re-

sult is a precise aiming system which contributes to low eye fa-

tigue, yet still allows top operator efficiency.

Constructed with a combination of design and performance-

based ideals such as bar code reading snappiness, motion tol-

erance, perfect ergonomics and an attractive price, this 2D im-

ager is the ideal solution for the customer who is looking to

replace their linear only reading scanners with image-based

technology.

Omni-

Directional

Operating

To read a symbol simply aim the reader and pull

the trigger. The QuickScan™ QD24XX is a power-

ful omni-directional reader, so the orientation of

the symbol is not important.

Datalogic’s exclusive patented ‘Green Spot’ for

good-read feedback helps to improve productiv-

ity in noisy environments or in situations where

silence is required. When using the product with

the cradle at a 45° position, the aiming pattern

can work as an aiming system to aid in position-

ing the bar code for quick and intuitive reading.

Setting Up the Reader

6 QuickScan™ QD2430

Setting Up the Reader

Follow the steps below to connect and get your reader up and

communicating with its host.

1. Connect the Cable to the reader and the Host.

2. Configure the Interface (see page 9).

3. Configure the Reader starting on page 19 (optional,

depends on settings needed).

Connect/Disconnect Cable to Reader

Figure 1. Connecting to the Reader

Host Connection:

The QuickScan plugs directly into the host

device as shown in

Figure 2. The power can also be supplied

through an external power supply via the Interface Cable sup-

plied with a power jack.

Decoding

Reliably decodes all standard 1D (linear) and 2D

bar codes, including GS1 DataBar™ linear codes,

Postal Codes (China Post), Stacked Codes (such as

GS1 DataBar Expanded Stacked, GS1 DataBar

Stacked, GS1 DataBar, Stacked Omnidirectional).

The data stream — acquired from decoding a

symbol — is rapidly sent to the host. The reader is

immediately available to read another symbol.

Side View

Rear View

Using the Quickscan™ QD24XX

Quick Reference Guide 7

Figure 2. Connecting to the Host

Using the Quickscan™ QD24XX

The Quickscan™ QD24XX normally functions by capturing

and decoding codes. The aiming system is activated on trigger

pull and indicates the center of the field of view which should

be positioned over the bar code:

Aiming System

Relative Size and Location of Aiming System Pattern

Side

View

Linear bar code

2D Matrix symbol

I am using QD 2430 with L18ER rs 232 Communication.
After Power cycle once it will scan after that it will start the blinking and not scan other barcode to scan it need to take again power cycle. Submitted on 24-1-2020 at 16:46
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Datalogic QuickScan QD2430 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Datalogic QuickScan QD2430 Manual

Product: