535637

Datalogic Gryphon I GFS4100 Manual

262
Zoom out
Zoom in
Previous page
1/294
Next page
Technical Specifications
260
Gryphon™ I GFS4170/GFS4150-9
LED and Beeper Indications
Button and LED Status
The top of the product has a button and three indicator LEDs:
POWER
(yellow LED)
ON = Power ON
OFF = Power OFF or standby (only USB model)
GOOD
(green LED)
ON = Go
od Read
Blinks = USB enumeration or interface inactive or waiting for
change o
f configuration
TRIGGER
(blu
e LED)
ON = external trigger or button pressed or phase active
Button Press for manual trigger
The reader’s beeper sounds and its LED illuminates to indicate various functions or errors on
the reader. An optional “Green Spot” also performs useful functions. The tables below list these
indications. One exception to the behaviors listed in the tables is that the reader’s functions are
programmable, and may or may not be turned on. For example, certain indications such as the
power-up beep can be disabled using programming barcode labels.
Table 38. LED and Beeper Indications
INDICATION DESCRIPTION LED BEEPER
Power-up Beep The reader is in the process of pow-
ering-up.
Reader beeps four times at highest
frequency and volume upon
power-up.
Good Read Beep A label has been successfully
scanned by
the reader.
LED behavior for this indica-
tion is configurable via the
fe
ature “
Good Read: When
to Indicate
”
The reader will beep once at cur-
rent frequency, volume, mono/bi-
tona
l settin
g and duration upon a
successful label scan.
ROM Failure There is an error in the reader's
sof
tware/programming
Flashes
Reader sounds one error beep at
hi
ghest volume.
Limited Scanning
Label R
ead
Indicates that a host connection is
not established when the USB
interface is enabled.
N/A
Reader 'chirps' six times at the
highest frequency and current vol-
ume.
Reader Active
Mode
T
he reader is active and ready to
scan.
The Green LED is lit steadily
a
N/A
Reader
Disabled
The reader has been disabled by
the host.
The Green LED blinks con-
tinuously
N/A
Green Spot is on
con
tinuously
While in Object Sense Mode, the
green spot stays on while in stand
watch state.
N/A N/A
… 262 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Datalogic Gryphon I GFS4100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Datalogic Gryphon I GFS4100 in the language / languages: English as an attachment in your email.

The manual is 14,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info