613024
12
Zoom out
Zoom in
Previous page
1/19
Next page
11
Operation
Installation
Remove all packing materials from the ZA-240VTU. Check that all foam and plastic padding is removed.
Secure the equipment into a 19" rack if preferred. Connect all cables.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 115V specification product on 230V power, or vice versa.
Before powering up the first time, make sure the AC-selector switch is set to the proper voltage.
Damage caused by connecting the amplifier to improper AC voltage is not covered by any warranty.
NOTE: Always turn off and disconnect the amplifier from mains voltage before making audio
connections. Also, as an extra precaution, have the attenuators turned down during power-up.
Connecting Inputs
Use jack input at the front or the XLR input connectors at the rear to supply audio signals to your DAP
Audio PA-Series amplifier. The XLR connectors accept balanced and unbalanced audio connections. (All
DAP audio amplifiers are configured standard with "Pin 2 hot" on XLR inputs. For more Information, see the
section on Connection cables on page 15.
Operating the Tuner
Selecting a station
Use the AM/FM (20) button to select either AM or FM band. Push the (25) or (26) button to tune
stepwise.
Pushing the (25) or (26) button for more than 1second will let you speed up the searching.
Selecting a preset.
Use the AM/FM (20) button to select either AM or FM band.
Push M1 (21), M2 (22), M3 (29), M4 (32) or M5 (33) to recall preset M1-M5.
Storing a station in Memory
Push the memory (28) button. “Memory” appears in the display and the preset number changes into a
line.
Now push button M1 (21), M2 (22), M3 (29), M4 (32) or M5 (33) to store the preset in the desired memory
location.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DAP Audio ZA-240 VTU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DAP Audio ZA-240 VTU in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info