613024

DAP Audio ZA-240 VTU Manual

11
Zoom out
Zoom in
Previous page
1/19
Next page
10
39. Zone output terminals
Each zone has it’s own output terminal. Each zone can be activated or deactivated by pushing the
corresponding zone (4) buttons. Connect this terminal to the + terminal of your your high impedance
(100V) speaker.
The total power rating of the high impedance speakers connected to all zones summed together, should
never exceed 240W.
40. FM Antenna connector
Connect your FM antenna to this connector.
41. AM Antenna connector
Connect your AM antenna to this connector.
42. GND Screw
This screw offers a separate ground connection. Can be useful in case of grounding problems.
43. DC 24V 20A terminal
DC 24V input (battery).
44. Common speaker terminal
Connect this terminal with the – terminal of your speaker(s).
45. Low impedance speaker terminals
Connect this terminal to the + terminal of either a 4 Ω or 8 Ω speakerload.
In case of using several speakers, make sure that the total speaker load is is the same as the impedance
of the corresponding terminal. The total power rating of the low impedance speakers connected to this
terminal summed, should be at least 240W.
46. High impedance terminals
Connect this terminal to the + terminal of either a 70V or 100V of your high impedance speaker load.
In case of using several speakers make sure all speakers are wired in parallel.
The total power rating of the 100V-speakers connected to this terminal summed, should never exceed
240W.
47. Aux out
RCA stereo line level output for connecting a recording device or another amplifier.
48. Line input 2
RCA stereo input for connecting a line level device such as an I-pod, CD player etc.
49. Line input 1
RCA stereo input for connecting a line level device such as an I-pod, CD player etc.
50. Mic input 3
Mic level balanced XLR input for channel 2.
51. Mic input 2
Mic level balanced XLR input for channel 1.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DAP Audio ZA-240 VTU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DAP Audio ZA-240 VTU in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info