613027

DAP Audio Palladium Vintage P500 Manual

9
Zoom out
Zoom in
Previous page
1/14
Next page
7
Stereo Operation
For stereo (dual channel) operation, set the mode select switch to the “Stereo” position. In this mode both
channels operate independently of each other, with their input attenuates controlling their respective levels.
A signal at Channel A’s input produces an amplified signal at Channel A’s output, while a signal at Channel
B’s input produces an amplified signal at Channel B’s output
Bridged Mono Operation
Both amplifier channels can be bridged together to make a very powerful single channel amplifier. When the
Mode switch is set to the “Bridge” position, 1 channel “pushes”, while the other “pulls” equally. Thus
effectively doubling the power. Use extreme caution when operating the amplifier in the bridged mode.
To bridge the amplifier, set the mode switch to the “Bridge” position. Apply the signal to Channel A’s input
and connect the speakers across the “hot” outputs – the red binding posts – of Channel A and B.
Channel B’s “hot” output is in phase with the input.
For operation adjust only the Channel A’s input attenuator, while Channel B’s input will not function
(Channel B’s input signal has been disconnected).
Never connect a „hot“-Output to ground or to other „hot“-Outputs!
Bridging Precautions
Never ground either side of the speaker cable when the amplifier is in bridged mode; Both sides are „hot“.
If an output patch panel is used, all terminals must be isolated from each other and from the ground.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DAP Audio Palladium Vintage P500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DAP Audio Palladium Vintage P500 in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info