Manual DAP Audio Palladium Vintage P500 (page 8 of 14) (English)

613027

Zoom out

Zoom in

1/14

The phone connectors have a standard Tip-Ring-Sleeve (TRS) – configuration: The tip is positive (+), the

ring is negative (-) and the sleeve is ground.

a) Jack-Inputs Balanced Signals

Tip-HOT Ring-COLD Sleeve-Ground

b) Jack-Inputs Unbalanced Signals

Tip-HOT Sleeve Ground

c) XLR INPUTS Balanced Signals

Pin 1 Ground Pin2 HOT Pin3 COLD

Connecting Outputs

Speakers can be connected using Banana plugs, Speakon plugs or bare wire to the binding posts on the

rear panel of the amplifier. Consult the Wire-Gauge-Chart to determine suitable wire gauges for different

load impedances and cable lengths.

The red binding posts are considered „hot“, connected to the positive poles of the speakers, while the black

binding-posts are Signal Ground, connected to the negative poles of the speakers.

Never connect a „hot“ (red) Output to the Ground or to other „hot“ (red) Outputs! Always turn off the amplifier

before making connections.

Connecting Power

The actual current draw, the amplifier demands from the AC mains, depends on many factors (its load,

output level or the crest factor of its program material).

The power requirement is rated under typical music conditions, with both channels driven so those peaks

are just at the clipping point.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DAP Audio Palladium Vintage P500 in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DAP Audio Palladium Vintage P500 Manual

Product: