613015
13
Zoom out
Zoom in
Previous page
1/22
Next page
12
22. Crossfader
The crossfader allows you to mix evenly from one channel to another channel.
23. Crossfader slope switch
This switch allows the user to select from three types of crossfader curve response.
In the left position, the curve produces a rapid signal rise. (As soon as the cross fader lever leaves the A
side, the B channel sound is produced.)
In the right position, the curve operates to produce an even, neutral rise throughout the cross fader’s
movement.
In the middle position, an intermediate curve is produced, midway between the two curves noted
above.
Master section
24. Output L/R signal VU meter
This meter is a multi-step LED; respectively the green LEDs show -30, -20, -15, -10, -7,
-4, -2, -1 and 0dB. The yellow LEDs show +1, +2, +4 and +6dB. The red LEDs show
+10dB and Clip. The accurate level indication allows you to monitor the output
signal level at anytime, and match with other devices. Lower the Master (25)
control if the Clip LED lights up frequently.
25. Master volume control
Use to adjust the volume level of the master RCA (60) or the master XLR (62)
outputs.
26. Balance control
Use to set the balance between the Left and right master output.
27. Return fader
Use this fader to control the level from the Return (64) input in the mastermix.
28. Channel fader curve switch
Use this switch to select the curve for all channel faders.
Fig. 10
Monitor section
29. Booth monitor control
Is used to adjust the volume level of the booth monitor (48) output.
30. Cue mix control
Allows the user to hear mixed audio of the monitor (cue) audio and the program
(master) audio in the headphones. When the knob is rotated to the left only the
cue audio will be heard, when in the right position only the program audio will be
heard.
31. Cue low level
Is used to boost or cut the low frequencies for the phones (33) output with up to
15dB.
Fig. 11
32. Cue level
Is used to adjust volume level of the phones (33) output.
33. Phones output
You can connect a pair of headphones with an impedance of 32 - 600 Ohm to the headphones
connector. It is a 6,3mm (1/4”) TRS socket, wired as Tip=left, Ring=right and sleeve = ground.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DAP Audio Core Mix-4 USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DAP Audio Core Mix-4 USB in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info