613015
11
Zoom out
Zoom in
Previous page
1/22
Next page
10
Installation
Remove all packing materials from the Core Mix-4 USB. Check that all foam and plastic padding is
removed. Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Functions
Microphone Channels
1. Mic input
Electronically balanced XLR-type input for connecting low impedance
microphones. The input has extremely low noise hum. When connecting a
microphone make sure that the pin assignment is correct. Always make sure to
read the manual of the microphone you want to connect. The XLR- input is not
suitable for connecting an additional mixing console, FX- unit,
etc. You have to use the line-inputs, when connecting this kind of equipment.
Note: When connecting signal sources, please make sure that the corresponding
channel’s level control and the master faders are at their minimum settings.
Otherwise, unpleasant plug-in noise can occur.
2. Mic level control
Use these controls to adjust the levels of microphone channel 1 and 2.
3/4/5. Channel EQ Hi/Mid/Low controls
Each channel is fitted with 3-band EQ. The Hi (3), Mid (4) and Bass (5) bands
have their center frequencies fixed at 5 Khz, 800 Hz and 70 Hz respectively. All
three bands have up to 26dB cut and up to 12 dB boost and have a centre
detent for “Off”. Turning the Equalizer level control to the right amplifies the
frequency range, turning to the left attenuates the signal. Minor changes to the
Fig. 8 equalizer control usually produce the best results. Try to avoid excessive
enhancement of the Mid band.
6. Send level control
Allows you to adjust the level of the according channel in the send mix.
7. Mic On/Off switch
Allows you to switch both microphone channels on or off.
8. Talkover switch
If the talkover function is active, channels 1-4 are automatically attenuated by 12dB while speaking in the
DJ-microphone.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DAP Audio Core Mix-4 USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DAP Audio Core Mix-4 USB in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info