Manual Danfoss TP4000 Range (page 82 of 84) (English, Dutch, French, Polish, Turkish, Spanish)

465413

Zoom out

Zoom in

1/84

TP4000 Range

Electronic Programmable Room Thermostat

MAKING MODERN LIVING POSSIBLE

User Guide

Danfoss Heating

TP4000

TP4000 Range

Electronic programmable room thermostat

Certification Mark

For a large print version of these instructions

please call Marketing on 0845 121 7400.

Danfoss can accept no responsibility for possible errors in catalogues, brochures, and other

printed material. All trademarks in this material are property of the respective companies.

Danfoss Heating

Thank you for Buying a Danfoss Product

Merci d’avoir choisi les produits Danfoss

Gracias por adquirir productos Danfoss

Bedankt dat u een Danfoss product heeft gekocht

Σας ευχαριστούμε για την αγορά ενόςDanfoss προϊόντος

Dziękujemy za zakup produktu Danfoss

Děkujeme Vám za nákup výrobku ﬁ rmy Danfoss

Danfoss Ürünlerini Kullandığınız İçinTeşekkür Ederiz

Zahvaljujemo na kupovini Danfoss proizvoda

Vă mulţumim că aţi cumpărat produse Danfoss

Köszönjük, hogy Danfoss terméket vásárolt!

Dėkojame, kad perkate Danfoss Produktus

TP4000

Index

1.0 Basics

1.1 Your programmable room thermostat .......................................6

1.2 Preset Programmes ...........................................................................6

1.3 Before you start...................................................................................6

1.4 Setting the Clock ................................................................................7

1.5 Running your programme ..............................................................7

2.0 Advanced

2.1 Before you change the preset programmes ............................7

2.2 Changing the preset programmes ..............................................8

2.3 Running your programme ..............................................................8

2.4 User Overrides .....................................................................................9

2.5 Altering display to show time or room temperature ............8

2.6 To temporarily alter current programmed temperature ........9

2.7 Frost Protection and Thermostat Mode .....................................9

2.8 Toggle between 12 hour and 24 hour clock ............................9

2.9 Toggle between °C and °F scaling ............................................. 10

3.0 Battery Replacement ............................................................................ 10

4.0 Resetting the unit ................................................................................... 10

User Instructions

TP4000 Range

Electronic Programmable Room Thermostat

Danfoss Heating

What is a programmable room thermostat?

... an explanation for householders

A programmable room thermostat is both a programmer and a room thermostat. A

programmer allows you to set ‘On’ and ‘Oﬀ ’ time periods to suit your own lifestyle. A

room thermostat works by sensing the air temperature, switching on the heating when

the air temperature falls below the thermostat setting, and switching it oﬀ once this set

temperature has been reached.

So, a programmable room thermostat lets you choose what times you want the

heating to be on, and what temperature it should reach while it is on. It will allow you

to select diﬀ erent temperatures in your home at diﬀ erent times of the day (and days of

the week) to meet your particular needs.

Turning a programmable room thermostat to a higher setting will not make the room

heat up any faster. How quickly the room heats up depends on the design of the

heating system, for example, the size of boiler and radiators.

Neither does the setting aﬀ ect how quickly the room cools down. Turning a

programmable room thermostat to a lower setting will result in the room being

controlled at a lower temperature, and saves energy.

The way to set and use your programmable room thermostat is to ﬁ nd the lowest

temperature settings that you are comfortable with at the diﬀ erent times you have

chosen, and then leave it alone to do its job. The best way to do this is to set low

temperatures ﬁ rst, say 18°C, and then turn them up by one degree each day until

you are comfortable with the temperatures. You won’t have to adjust the thermostat

further. Any adjustments above these settings will waste energy and cost you more

money.

If your heating system is a boiler with radiators, there will usually be only one

programmable room thermostat to control the whole house. But you can have

diﬀ erent temperatures in individual rooms by installing thermostatic radiator valves

(TRVs) on individual radiators. If you don’t have TRVs, you should choose a temperature

that is reasonable for the whole ho use. If you do have TRVs, you can choose a slightly

higher setting to make sure that even the coldest room is comfortable, then prevent

any overheating in other rooms by adjusting the TRVs.

The time on the programmer must be correct. Some types have to be adjusted in spring

and autumn at the changes between Greenwich Mean Time and British Summer Time.

You may be able to temporarily adjust the heating programme, for example, ‘Override’,

‘Advance’ or ‘Boost’. These are explained in the manufacturer’s instructions.

Programmable room thermostats need a free ﬂ ow of air to sense the temperature, so

they must not be covered by curtains or blocked by furniture. Nearby electric ﬁ res,

televisions, wall or table lamps may prevent the thermostat from working properly.

TP4000

1.0 Basics

1.1 Your programmable room thermostat

The TP4000 allows you to programme up to 6 times and temperatures

at which your heating will come on and go oﬀ each day.

It features several user overrides including frost protection,

thermostat mode and time or temperature display.

1.2 Preset Programmes

Your TP4000 comes ready programmed with a set of operating times

and temperatures which often suit most people.

If you want to change any of these settings you can do so by following

the instructions on page 8.

First, follow the steps on page 7 to set the correct time and date.

Event Time Temp °C

1 06:30 20

2 08:30 15

3 11:30 20

4 13:30 15

5 16:30 21

6 22:30 15

RESET

Open the ﬂ ap on the front of the programmer

and press the RESET button with a non-

metallic object until the display goes blank.

This will ensure that the factory programmes

are set and that the micro-computer in the

product is operating correctly.

1.3 Before you start

Danfoss Heating

1.4 Setting the Clock

Note: clock is displayed in 24 hour mode.

Press PROG and Λ until the time on the display

ﬂ ashes.

Use + or - to adjust the TIME (press and hold to

change in 10 min increments).

Press PROG to enter the TIME.

1.5 Running your programme

If you are happy to use the preset programmes

on page 6, you don’t need to do anything else.

Your unit is now in RUN mode.

2.0 Advanced

2.1 Before you change the preset programmes

Please Note

The unit must be programmed in sequence. Event times cannot

be programmed out of sequence.

If you want to leave a preset time as it is, simply press PROG to

move on to the next setting.

During programming, if no buttons are pressed for 2 minutes the unit

will automatically return to RUN mode, and the programme set up to

that minute will be active.

TP4000

a) Press PROG until 1st pre-set time and

temperature appears in display.

b) Use + or – buttons to adjust the TIME

(press and hold to change in 10 min

increments).

c) Use Λ or V buttons to adjust the

TEMPERATURE.

d) Press PROG to move to next preset time &

temperature (Event 2).

e) Repeat steps b, c & d for programming

Events 3, 4, 5 & 6.

Note: Press and hold PROG at any time will

make the unit return to RUN mode.

2.3 Running your programme

Press PROG – the colon in the LCD display

will start to ﬂ ash. The heating will now be

controlled with the programmed times and

temperatures.

2.4 User Overrides

Sometimes you may need to change the way you use your heating

temporarily, e.g. due to unusually cold weather. The TP4000 has several

user overrides, which can be selected without aﬀ ecting the thermostat

programming.

2.2 Changing the preset programmes

Danfoss Heating

2.5 Altering display to show either time or

actual room temperature

· Press + and – together to change between

settings.

· Press Λ or V until required temperature is

displayed.

(This override will automatically cancel at

beginning of next programmed event).

2.6 To temporarily alter the current programmed

temperature

A constant temperature between 5°C-30°C can be selected if desired, for

example, for frost protection.

· Press Λ and V together.

· Use Λ or V buttons to set the desired low

temperature.

- At 5°C a snowﬂ ake symbol appears

indicating frost protection mode.

- At all other temperatures the snowﬂ ake

symbol is turned oﬀ .

· To return to automatic programming press

Λ and V together again.

2.7 Frost Protection and Thermostat Mode

To change time display between 12 hour and 24 hour clock. Press Λ

and + together to toggle between 12 and 24 hour clock.

2.8 Toggle between 12 hour and 24 hour clock

TP4000

3.0 Battery Replacement

When batteries are low a battery symbol will

ﬂ ash in the LCD display. You have 15 days to

replace the battery before the unit switches

oﬀ .

When changing batteries, remove old batteries and insert new ones

within one minute and programming will not be lost.

4.0 Resetting the unit

Partial reset: Press RESET (used to restart micro-computer) if display

freezes for any reason. This does not reset any programme, clock or

date. It is recommended that this is done at time of installation.

User full reset: Press RESET whilst holding down PROG button. This

resets event times and and temperatures back to the factory presets.

The unit must be re-programmed. The correct time will be retained.

IMPORTANT: always use high quality alkaline batteries

NB. If the display ever goes blank during normal operation, the

batteries will need to be renewed, the unit reset and the time

reprogrammed. The event times and temperatures will be retained.

To change between °C and °F scaling. Press V and - together to

toggle between °C and °F temperature scaling.

2.9 Toggle between °C and °F scaling

Danfoss Heating

Index

1.0 Informations de base

1.1 Votre thermostat d’ambiance programmable ....................... 12

1.2 Programmes Prédéﬁ nis ................................................................. 12

1.3 Avant de commencer ..................................................................... 13

1.4 Réglage de l’heure .......................................................................... 13

1.5 Exécution du programme............................................................. 13

2.0 Informations avancées

2.1 Avant de modiﬁ er les programmes prédéﬁ nis ..................... 14

2.2 Modiﬁ cation des programmes prédéﬁ nis ..............................14

2.3 Exécution de votre programme ................................................. 15

2.4 Dérogations ....................................................................................... 15

2.5 Modiﬁ cation de l’aﬃ chage pour indiquer l’heure ou la

température ambiante eﬀ ective ............................................... 15

2.6 Pour modiﬁ er temporairement la température

programmée ..................................................................................... 15

2.7 Protection anti-gel et mode thermostat .................................16

2.8 Changer le mode d’aﬃ chage en 12 heures ou

24 heures ............................................................................................16

2.9 changer l’unité de température entre °C et °F ....................... 16

3.0 Remplacement des Piles ..................................................................... 17

4.0 Remise à zéro du thermostat ............................................................ 17

Notice d’utilisation

Série TP4000

Thermostats d’ambiance programmable

TP4000

1.0 Informations de base

1.1 Votre thermostat d’ambiance programmable

Le TP4000 vous permet de programmer jusqu’à 6 périodes de

températures auxquelles votre chauﬀ age s’allumera et s’éteindra

chaque jour.

Il comprend plusieurs fonctions supplémentaires pour l’utilisateur

dont protection antigel, mode thermostat et aﬃ chage de l’heure ou

de la température.

1.2 Programmes Prédéﬁ nis

Votre TP4000 est livré préalablement programmé avec une série

d’heures et de températures de fonctionnement qui conviennent

généralement à la plupart des utilisateurs

Si vous souhaitez modiﬁ er l’un de ces réglages, il vous suﬃ t de suivre

les instructions aux page 14

Suivez tout d’abord les points indiqués à la page 13 pour régler

l’heure.

Période Heure Temp °C

1 06:30 20

2 08:30 15

3 11:30 20

4 13:30 15

5 16:30 21

6 22:30 15

Danfoss Heating

1.3 Avant de commencer

Ouvrez le volet à l’avant du thermostat et

appuyez sur le bouton RESET à l’aide d’un

objet non métallique jusqu’à ce que l’aﬃ chage

disparaisse. Cette opération permet de

s’assurer que les programmes d’usine sont

réglés et que le processeur du thermostat

fonctionne correctement.

1.4 Réglage de l’heure

Remarque: l’horloge s’aﬃ che en mode 24 heures.

Presser en même temps PROG et Λ jusqu’à ce

que l’heure clignote

Utilisez les boutons + ou – pour régler

l’HEURE

(appuyez sur les boutons en les maintenant

enfoncés pour changer l’heure par incréments

de 10 min).

Appuyez sur PROG pour conﬁ rmer l’heure.

1.5 Exécution du programme

Si les programmes prédéﬁ nis indiqués à la

page 12 vous conviennent, aucune autre

manipulation ne sera nécessaire.

Votre appareil est désormais en mode RUN. (Fonctionnement).

RESET

TP4000

a) Appuyez sur PROG jusqu’à ce que les

ères

heure et température prédéﬁ nies

s’aﬃ chent à l’écran.

b) Utilisez les boutons + ou – pour régler

l’HEURE (appuyez sur les boutons en

les maintenant enfoncés pour changer

l’heure par incréments de 10 min).

c) Utilisez les boutons Λ ou V pour régler la

TEMPERATURE.

d) Appuyez sur PROG pour passer aux heure

& température prédéﬁ nies suivantes

(Période 2).

e) Répétez les points b, c & d pour la

programmation des Périodes 3, 4, 5 & 6.

Important

Le thermostat doit être programmé en séquence. Les heures de

réglage ne peuvent pas être programmées hors séquence.

Si vous souhaitez laisser une heure prédéﬁ nie inchangée, il vous

suﬃ t d’appuyer sur PROG pour passer au réglage suivant.

Au cours de la programmation, si aucune touche n’est actionnée

pendant 2 minutes, l’appareil repassera automatiquement en

mode RUN (Fonctionnement), et le programme conﬁ guré à cet

instant

sera activé.

2.0 Informations avancées

2.1 Avant de modiﬁ er les programmes prédéﬁ nis

2.2 Modiﬁ cation des programmes prédéﬁ nis

Danfoss Heating

2.3 Exécution de votre programme

Appuyez sur PROG – les deux points sur l’écran

LCD se mettront à clignoter. Votre chauﬀ age

sera maintenant contrôlé par les heures et

températures programmées.

2.4 Dérogations

Vous pouvez parfois avoir besoin de modiﬁ er temporairement le

mode de fonctionnement de votre chauﬀ age, ex. en raison d’un temps

exceptionnellement froid. Le TP4000 intègre plusieurs fonctions de

dérogation pour l’utilisateur, qui peuvent être sélectionnées sans aﬀ ecter

la programmation du thermostat.

2.5 Modiﬁ cation de l’aﬃ chage pour indiquer

l’heure ou la température ambiante eﬀ ective

• appuyez sur + et – simultanément pour

basculer entre les réglages.

2.6 Pour modiﬁ er temporairement la

température programmée

• Appuyez sur Λ ou V jusqu’à ce que la

température désirée s’aﬃ che.

(La priorité s’annulera automatiquement

au début de la période suivante

programmée).

TP4000

3.0 Baterijos pakeitimas

Nusekus baterijoms, LCD ekrane atsiras ir

pradės mirksėti baterijos simbolis. Per 15 dienų

jūs turėsite pakeisti bateriją, kol termostatas

neišsijungs.

Keičiant baterijas, nuimkite senas baterijas ir įstatykite naujas per

vieną minutę, kad nepradingtų užprogramuotos funkcijos.

SVARBU: visuomet naudokite aukštos kokybės šarmines

baterijas

NB. Jeigu kada nors normalaus darbo metu ekranas taptų tuščias,

baterijas reiktų pakeisti, naujai nustatyti termostatą ir perprogramuoti

laiką. Įvykių laikai ir temperatūros bus išsaugoti.

Perjungimas tarp °C ir °F skalės. Vienu metu spauskite Λ ir + ir

pakeiskite temperatūros skalę iš °C į °F ir atvirkščiai.

2.9 Perjungimas tarp °C ir °F skalės

Norint pakeisti laikrodžio ekrane laiko režimą iš 12 valandų į 24

valandų ir atvirkščiai, spauskite vienu metu Λ ir +.

2.8 Perjungimas tarp 12 valandų ir 24 valandų

laikrodžio režimo

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Danfoss TP4000 Range in the language / languages: English, Dutch, French, Polish, Turkish, Spanish as an attachment in your email.

The manual is 1,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Danfoss TP4000 Range Manual

Product: