Manual Danfoss TP4000 Range (page 81 of 84) (English, Dutch, French, Polish, Turkish, Spanish)

465413

Zoom out

Zoom in

1/84

TP4000 Range

Electronic Programmable Room Thermostat

MAKING MODERN LIVING POSSIBLE

User Guide

Danfoss Heating

TP4000

TP4000 Range

Electronic programmable room thermostat

Certification Mark

For a large print version of these instructions

please call Marketing on 0845 121 7400.

Danfoss can accept no responsibility for possible errors in catalogues, brochures, and other

printed material. All trademarks in this material are property of the respective companies.

Danfoss Heating

Thank you for Buying a Danfoss Product

Merci d’avoir choisi les produits Danfoss

Gracias por adquirir productos Danfoss

Bedankt dat u een Danfoss product heeft gekocht

Σας ευχαριστούμε για την αγορά ενόςDanfoss προϊόντος

Dziękujemy za zakup produktu Danfoss

Děkujeme Vám za nákup výrobku ﬁ rmy Danfoss

Danfoss Ürünlerini Kullandığınız İçinTeşekkür Ederiz

Zahvaljujemo na kupovini Danfoss proizvoda

Vă mulţumim că aţi cumpărat produse Danfoss

Köszönjük, hogy Danfoss terméket vásárolt!

Dėkojame, kad perkate Danfoss Produktus

TP4000

Index

1.0 Basics

1.1 Your programmable room thermostat .......................................6

1.2 Preset Programmes ...........................................................................6

1.3 Before you start...................................................................................6

1.4 Setting the Clock ................................................................................7

1.5 Running your programme ..............................................................7

2.0 Advanced

2.1 Before you change the preset programmes ............................7

2.2 Changing the preset programmes ..............................................8

2.3 Running your programme ..............................................................8

2.4 User Overrides .....................................................................................9

2.5 Altering display to show time or room temperature ............8

2.6 To temporarily alter current programmed temperature ........9

2.7 Frost Protection and Thermostat Mode .....................................9

2.8 Toggle between 12 hour and 24 hour clock ............................9

2.9 Toggle between °C and °F scaling ............................................. 10

3.0 Battery Replacement ............................................................................ 10

4.0 Resetting the unit ................................................................................... 10

User Instructions

TP4000 Range

Electronic Programmable Room Thermostat

TP4000

a) Press PROG until 1st pre-set time and

temperature appears in display.

b) Use + or – buttons to adjust the TIME

(press and hold to change in 10 min

increments).

c) Use Λ or V buttons to adjust the

TEMPERATURE.

d) Press PROG to move to next preset time &

temperature (Event 2).

e) Repeat steps b, c & d for programming

Events 3, 4, 5 & 6.

Note: Press and hold PROG at any time will

make the unit return to RUN mode.

2.3 Running your programme

Press PROG – the colon in the LCD display

will start to ﬂ ash. The heating will now be

controlled with the programmed times and

temperatures.

2.4 User Overrides

Sometimes you may need to change the way you use your heating

temporarily, e.g. due to unusually cold weather. The TP4000 has several

user overrides, which can be selected without aﬀ ecting the thermostat

programming.

2.2 Changing the preset programmes

Danfoss Heating

2.5 Altering display to show either time or

actual room temperature

· Press + and – together to change between

settings.

· Press Λ or V until required temperature is

displayed.

(This override will automatically cancel at

beginning of next programmed event).

2.6 To temporarily alter the current programmed

temperature

A constant temperature between 5°C-30°C can be selected if desired, for

example, for frost protection.

· Press Λ and V together.

· Use Λ or V buttons to set the desired low

temperature.

- At 5°C a snowﬂ ake symbol appears

indicating frost protection mode.

- At all other temperatures the snowﬂ ake

symbol is turned oﬀ .

· To return to automatic programming press

Λ and V together again.

2.7 Frost Protection and Thermostat Mode

To change time display between 12 hour and 24 hour clock. Press Λ

and + together to toggle between 12 and 24 hour clock.

2.8 Toggle between 12 hour and 24 hour clock

TP4000

3.0 Battery Replacement

When batteries are low a battery symbol will

ﬂ ash in the LCD display. You have 15 days to

replace the battery before the unit switches

oﬀ .

When changing batteries, remove old batteries and insert new ones

within one minute and programming will not be lost.

4.0 Resetting the unit

Partial reset: Press RESET (used to restart micro-computer) if display

freezes for any reason. This does not reset any programme, clock or

date. It is recommended that this is done at time of installation.

User full reset: Press RESET whilst holding down PROG button. This

resets event times and and temperatures back to the factory presets.

The unit must be re-programmed. The correct time will be retained.

IMPORTANT: always use high quality alkaline batteries

NB. If the display ever goes blank during normal operation, the

batteries will need to be renewed, the unit reset and the time

reprogrammed. The event times and temperatures will be retained.

To change between °C and °F scaling. Press V and - together to

toggle between °C and °F temperature scaling.

2.9 Toggle between °C and °F scaling

Danfoss Heating

Index

1.0 Informations de base

1.1 Votre thermostat d’ambiance programmable ....................... 12

1.2 Programmes Prédéﬁ nis ................................................................. 12

1.3 Avant de commencer ..................................................................... 13

1.4 Réglage de l’heure .......................................................................... 13

1.5 Exécution du programme............................................................. 13

2.0 Informations avancées

2.1 Avant de modiﬁ er les programmes prédéﬁ nis ..................... 14

2.2 Modiﬁ cation des programmes prédéﬁ nis ..............................14

2.3 Exécution de votre programme ................................................. 15

2.4 Dérogations ....................................................................................... 15

2.5 Modiﬁ cation de l’aﬃ chage pour indiquer l’heure ou la

température ambiante eﬀ ective ............................................... 15

2.6 Pour modiﬁ er temporairement la température

programmée ..................................................................................... 15

2.7 Protection anti-gel et mode thermostat .................................16

2.8 Changer le mode d’aﬃ chage en 12 heures ou

24 heures ............................................................................................16

2.9 changer l’unité de température entre °C et °F ....................... 16

3.0 Remplacement des Piles ..................................................................... 17

4.0 Remise à zéro du thermostat ............................................................ 17

Notice d’utilisation

Série TP4000

Thermostats d’ambiance programmable

Danfoss Heating

2.5 Ekrano vaizdo pakeitimas, rodant laiką arba

faktinę kambario temperatūrą

· Nuspauskite + ir – vienu metu ir pakeiskite

nustatymus.

· Spauskite Λ arba V tol, kol pasirodys

reikiama temperatūra.

(Šis rankinis perprogramavimas automatiškai

bus panaikintas, prasidėjus sekančiam

užprogramuotam įvykiui).

2.6 Laikinas esamos užprogramuotos

temperatūros pakeitimas

Jeigu norite, apsaugai nuo užšalimo galite pasirinkti pastovią

temperatūrą tarp 5°C-30°C.

· Spauskite Λ ir V vienu metu.

· Λ arba V mygtukais nustatykite norimą

žemą temperatūrą.

- Esant 5°C, pasirodys snaigės simbolis,

rodantis apsaugos nuo užšalimo

režimą.

- Esant visoms kitoms temperatūroms,

snaigės simbolis išjungiamas.

· Norint grįžti į automatinį programavimą,

vėl nuspauskite Λ ir V vienu metu.

2.7 Apsauga nuo užšalimo ir termostato režimas

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Danfoss TP4000 Range in the language / languages: English, Dutch, French, Polish, Turkish, Spanish as an attachment in your email.

The manual is 1,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Danfoss TP4000 Range Manual

Product: