745095
6
Zoom out
Zoom in
Previous page
1/41
Next page
UK DE DK
9
FR JP
4.0 CONNECTION
The main connections is located on the back of the left ZENSOR AX speaker (see Figure 5)
1) Mains connector. Connect the supplied power cord to the mains connector and your mains
outlet.
2) Main power switch. “ON” powers up the ZENSOR AX. “OFF” turns the ZENSOR AX off
completely.
3) Fuse compartment. If the ZENSOR AX fails to power up when connected to the mains and
the POWER switch is set to ON, the fuse may have blown or be faulty. Replace the fuse
with the same type as originally supplied – see fuse type on the amplier back plate. If
the fuse blows repeatedly, have the ZENSOR AX checked at an authorised service centre –
contact your authorised dealer.
4) Right speaker output. The red (+) terminal of the right speaker must be connected to
the red (+) terminal of the left speaker. The black (-) terminal of the right speaker must be
connected to the black (-) terminal of the left speaker (see Figure 6).
5) Volume down.
6) Volume up.
7) Source select. Press to toggle between AUX IN (Front LED = Green), OPTICAL IN (Front LED
= Yellow) and Bluetooth input (Front LED = Blue).
8) AUX IN. Analogue input via stereo mini-jack.
9) SUB OUT. Output to an active subwoofer. Works with any active subwoofer. DALI SUB E-9
F or SUB E-12 F is a perfect match for the ZENSOR AX series. Ask your local DALI dealer
for further advice.
10) OPTICAL IN. Optical input via TOSLink.
11) Bluetooth release. Disconnects the current Bluetooth connection and readies the
ZENSOR AX for a new pairing/connection.
NOTE: Before connecting cables or changing any connections, ALWAYS turn off your ZENSOR
AX speaker.
NOTE: Make sure that the bare conductors are tightly gripped by the terminals with no loose
wires which could cause a short circuit and damage the ZENSOR AX speaker (see Figure 4).
5.0 USAGE
When powered on for the rst time the ZENSOR AX will start in Bluetooth mode. Use the Source
button on the back of the left speaker or the dedicated button on the remote to change input.
5.1 REMOTE CONTROL
Use the included remote control (see Figure 6) to easily control power, volume and input on
the ZENSOR AX. It is also possible to use the DALI REMOTE (Not included, contact your local
DALI dealer) with the ZENSOR AX system.
1) Power. Toggle power On/Off
2) Mute. Mute and un-mute the sound
3) Optical In. Selects the optical input
4) AUX In. Selects the AUX input
5) Bluetooth. Select the Bluetooth input
6) Volume up
7) Volume down
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dali Zensor AX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dali Zensor AX in the language / languages: English, German, Danish as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dali Zensor AX

Dali Zensor AX User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info