Manual Dali Zensor AX (page 5 of 41) (English, German, Danish)

745095

Zoom out

Zoom in

1/41

1.0 INTRODUCTION

Congratulations with your new DALI ZENSOR AX loudspeaker. It is important to us that your new

DALI loudspeakers are set up and connected optimally. For this reason, we recommend that you

read this manual and follow its recommendations. The manual contains instructions for setup

and connection, as well as tips and advice on how to get the most out of your new loudspeakers.

DALI is acclaimed around the world for unique loudspeakers built to our uncompromising

standards for design and performance. The goal for every single DALI loudspeaker is always

our foremost commitment: To create a listening experience in your home that will make you

forget time and place.

Remember to sign up for the DALI newsletter at www.dali-speakers.com.

Enjoy!

2.0 UNPACKING

Be careful not to damage the contents when you unpack the parts. Depending on which DALI

ZENSOR AX model you have bought, different accessories come with the loudspeaker. Check

that all parts are contained in the cardboard box (see Table 1). Keep the packaging materials

should your speaker need to be relocated or serviced.

3.0 POSITIONING

To achieve the best results, the loudspeaker setup should be symmetrical round your favourite

listening position, see Figure 1. We recommend that you experiment with the position of your

loudspeakers – the sound quality will change depending on the loudspeaker position. Objects

positioned between the speaker and the listening position might negatively affect sound quality.

The speakers are designed to meet our wide dispersion principle, so they should NOT be angled

towards the listening position, but be positioned parallel with the rear wall, see Figure 2. By

parallel positioning, the distortion in the main listening area will be lowered and the room

integration will be improved. The wide dispersion principle will ensure that sound is spread

evenly within a large area in the listening room.

3.1 DALI ZENSOR 1 AX

ZENSOR 1 AX is designed to be positioned close to the wall. The speaker can be positioned on

a stand/shelf or hung on a wall using the integrated wall bracket. If positioned on a stand or

shelf, the enclosed small rubber bumpers can be mounted under the speaker for stable and

vibration free positioning, see Figure 3A. If hung on a wall, mount the larger bumpers on the

rear edges of the speakers. The speakers are hung on a wall using one screw (be sure to use

a screw appropriate for the wall type) mounted in the wall. The screw must t the wall bracket

on the rear side of the speaker, see Figure 3B.

The ZENSOR 1 AX should ideally be positioned, so that the height of the tweeter is approximately

at ear height when seated in your favourite listening position.

3.2 DALI ZENSOR 5 AX

ZENSOR 5 AX is designed as a oor standing speaker. ZENSOR 5 AX can be used with spikes or

rubber bumpers under the speaker, see Figure 3C/D. Be careful not to over tighten the locking

nuts. Spikes or rubber bumpers can improve the sound quality. You can try both to hear what

gives the best sound quality in your setup. Please be aware, that spikes may damage the oor,

if it is not protected by e.g. coins under the spikes. They should be positioned minimum 10 – 20

cm (4 – 8”) from the rear wall.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dali Zensor AX in the language / languages: English, German, Danish as an attachment in your email.

The manual is 1,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dali Zensor AX

Dali Zensor AX User Manual - German - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dali Zensor AX Manual

Product: