Manual Dali SUB P-10 DSS (page 9 of 14) (English)

745210

Zoom out

Zoom in

1/14

5.1 PHASE SETTING

The PHASE switch of the subwoofer has 4 settings: 0°, 90°, 180°, and 270°. The phase setting will

adjust the timing between the subwoofer and the main speakers. To set the phase, do the following:

1) Turn up the volume of your subwoofer a little higher than you would normally do.

2) Set the crossover point to maximum (120 Hz).

NOTE: If you have connected the subwoofer via LFE instead of LINE IN you need to set the

crossover point for your subwoofer to maximum in the menu of your surround sound (pre-)

ampliﬁer/receiver.

3) In your listening position, play music of the type previously described.

4) Press the ‘PHASE’ button and adjust to the desired value using the ‘+’ and ‘-’ buttons.

Toggle between 0°, 90°, 180°, and 270°, while focusing on the bass output.

The optimal setting of the PHASE switch is where you experience maximum bass output.

5.2 VOLUME ADJUSTMENT

The volume should be adjusted so that the bass matches the level of your main speakers.

Press the ‘VOLUME’ button and adjust to the desired value using the ‘+’ and ‘-’ buttons.

You should be able to appreciate your subwoofer’s contribution to the overall sound, without it

ever being overpowering. Bass must be tight and accurate so that the subwoofer reproduces

the exact amount of bass present in the music/soundtrack; no more, no less. When installing

the DALI SUB P-10 DSS in a surround sound system, we recommend selecting a ﬁxed level

on the subwoofer and adjusting the subwoofer output using the surround (pre-) ampliﬁer’s/

receiver’s setup function.

If bass levels are set too high, distortion will reduce the quality of your listening experience.

Remember that you can boost the bass level by selecting a physical position close to the wall

or even better – in a corner (see chapter “3.0 Positioning”).

5.3 CROSSOVER FREQUENCY ADJUSTMENT

Once you have set the phase and the volume level, you need to adjust the frequency overlap

between the main speakers and the DALI SUB P-10 DSS.

5.3.1 USING LINE INPUT

The crossover frequency adjustment on the subwoofer is only possible when using the

LINE INPUT(S).

Press the ‘CROSSOVER’ button and adjust to the desired value using the ‘+’ and ‘-’ buttons

until you can hear the bass is even with no drop-outs (Frequency range 40-120 Hz). Smaller

speakers typically require a higher crossover point, whereas larger speakers will accept a lower

crossover point. For example when using your DALI SUB P-10 DSS together with DALI EPICON

2, we recommend a crossover point of approximately 80 Hz.

After having adjusted the crossover frequency you may have to re-adjust the volume to

optimize performance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dali SUB P-10 DSS in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dali SUB P-10 DSS Manual

Product: