758708
20
Zoom out
Zoom in
Previous page
1/43
Next page
Local Setting 11
Parameter
Description
Menace Password
Under any of these two situations you can use menace password.
By default, the menace password is entering the public unlock
password reversed.
You can configure any number as needed.
Once the duress password is used
When using VTO as SIP server, there will be an alarm record
at Log Management > Alarm.
When using platform as SIP server, you can connect alarm
output device to get alarm notice.
Menace Password
Confirm
Click Save. Step 3
4.3.2 RS485
This section introduces the access control configuration of RS-485 devices, including lock and
lift control.
On the main interface (Figure 3-1), select Local Setting > Access Control > RS485. Step 1
The RS485 interface is displayed. See Figure 4-4.
RS485 Figure 4-4
Configure parameters, and you can select Lock or Lift Control in the Interface Type Step 2
list. For the detailed description, see Table 4-4.
Table 4-4 RS-485 access control parameter description
Parameter
Description
Lock
Unlock
Responding
Interval
The time interval to unlock again after the previous unlock,
and the unit is second.
Unlock Period
The time amount for which the lock stays open after unlock,
and the unit is second.
Second Unlock
Command
You can connect a third-party phone such as SIP phone to
your VTO, and use the command to open the door remotely.
Second Lock
You can connect one more door to RS-485 device.
If you select the Enable check box, then the second lock
will be opened by default when pressing unlock button,
swiping access card or using unlock password.
If you do not select the Enable check box, then the first
lock will be opened by default when pressing unlock
button, swiping access card or using unlock password.
Lift
Control
Lift Control
Protocol
Select the protocol as needed to enable the lift control
function, and then you can configure the floors that lift users
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dahua VTO9541D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dahua VTO9541D in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dahua VTO9541D

Dahua VTO9541D Quick start guide - English - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info