758708
19
Zoom out
Zoom in
Previous page
1/43
Next page
Local Setting 10
4.3.1 Local
On the main interface (Figure 3-1), select Local Setting > Access Control > Local. Step 1
The Local interface is displayed. See Figure 4-3.
Local Figure 4-3
Configure parameters, and for the detailed description, see Table 4-3. Step 2
Table 4-3 Local access control parameter description
Parameter
Description
Unlock Responding
Interval
The time interval to unlock again after the previous unlock, and the
unit is second.
Unlock Period
The time amount for which the lock stays open after unlock, and
the unit is second.
Door Sensor Check
Time
If you have installed door sensor, then you can configure the time
period, and If the unlock time exceeds the Door Sensor Check
Time, the door sensor alarm is triggered, and the alarm will be sent
to the management center.
Select the Enable check box, and the door will not be locked
until the door sensor contacts each other.
If you do not select the Enable check box, the door will be
locked after the Unlock Period finishes.
Issue Card Password
This password can be used to issue new card.
This password is only for admin people or engineer.
It is 888888 by default.
Project Password
It can be used to go to the engineering interface, and it is 888888
by default.
Project password is only for admin people or engineers.
First Unlock
Command
You can connect a third-party phone such as SIP phone to your
VTO, and use the command to open the door remotely.
Door Contact Type
Select NC or NO according to the lock you use.
Public Unlock
Password
Select the Enable check box, then configure the public unlock
password, and then all the residents in this unit can open the door
with this password.
Public Unlock
Password Confirm
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dahua VTO9541D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dahua VTO9541D in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dahua VTO9541D

Dahua VTO9541D Quick start guide - English - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info