Step 3
Select "Preset" and the camera will quickly move to the corresponding position of the preset.
Note
It needs to implement the step when it is to set the intelligent rules of tracking speed dome.
Step 4
It is to configure the rule of cross fence.
1. Click , double click the new rule, set rule name, and select rule type as "Tripwire", which is shown
in Figure 4-65.
Figure 4-65
2. Click "Draw Rule" to draw rules on the monitoring image, right click to end drawing;
Note
Click "Clear" to delete all the drawn tripwires.
3. Select max size or min size, click "Draw Target", and drag any angle of the filter box to enlarge or
narrow the filter box to proper size.
Note
It will alarm only when the size of target is between two filter boxes.
