670262
119
Zoom out
Zoom in
Previous page
1/190
Next page
Click "Clear" to delete all the drawn rules.
3. Select max size or min size, click "Draw Target", and drag any angle of the filter box to enlarge or
narrow the filter box to proper size.
Note
It will alarm only when the size of target is between two filter boxes.
In the state of drawing, select "Max Size" or "Min Size", click "Clear" to delete corresponding
filtering box.
4. It is to set the parameters of cross fence, please refer to Table 4-28 for more details.
Parameter
Note
Working period
It is to set the alarm period, it can enable alarm event only during the
period range which has been set.
1. Click Setup and the system will pop out the interface of Working
Period.
2. It is to set working period according to the following methods:
You can input time numerical value or press the left mouse button to
drag on the setup interface to set.
Click the "Setup" of corresponding week, select the check box in front
of the period on the bottom of the interface, and input time value, there
are six periods to be set every day.
3. Click Save to complete the setup of working period.
Direction
It is set the direction of crossing fence, you can select A→BB→AAB.
Alarm track
Select the check box, the tracking speed dome will automatically trigger
alarm when the target triggers intelligent rule.
Track time
It is the time when the tracking speed dome automatically track the object
which triggers alarm after alarm occurs.
Record
Select check box and set record channel, the corresponding channel will
implement alarm and record automatically when alarm happens.
Note
Please refer to "4.1.2.5 Set Path" for record file storage location query
and setting.
The system record needs to meet following two conditions when alarm
happens.
It has enabled motion detection record, please refer to "4.5.1.1
Configure Record Schedule" for more details.
It has set auto record, please refer to '4.5.3 Configure Record
Control" for more details.
Record delay
System can delay the record for specified time after alarm ended.
Relay out
Connect alarm output port to alarm device (such as lamplight, siren and so
on), select check box and set alarm output device, enable alarm linkage
output port, and the system can activate corresponding alarm output device
when alarm occurs.
119


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dahua PSD81602-A360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dahua PSD81602-A360 in the language / languages: English as an attachment in your email.

The manual is 6,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dahua PSD81602-A360

Dahua PSD81602-A360 Quick start guide - English - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info