643125
17
Zoom out
Zoom in
Previous page
1/25
Next page
16
Changing User Options
User Options can be changed to suit individual preferences.
1. Open the door.
Display turns off.
2. Press and hold STOP pad for a while.
When the oven enters Option Code mode, it will show "CODE---" in
the display.
3. Press two number pads in order for a two digit option code.
For example, if you want to choose "CODE 1-0" from the cook
ending signal list, press number 1 pad and number 0 pad in order.
4. Press START pad to save changes.
To change additional option codes, repeat steps 3 and 4.
User Options Table
How to shut off the clean filter reminder
It will stop displaying automatically after 24 hours.
Or it will be able to be shut off by pressing and holding stop pad for a while until a long beep sounds in
idle mode with the closed oven door.
Cook Ending Signal
Key Pad Beep On/Off
Stage Cook Change Beep
On/Off
Maximum Cooking Time
Preprogrammed Cook
Display OFF Time
Counter
Repeat Feature
COOK END message
Reminder
Manual Time Cook Lock
Clean Filter Reminder
Option Code Setting Description (Factory default setting in bold)
CODE 1-0
CODE 1-1
CODE 1-2
CODE 1-3
CODE 1-4
CODE 2-0
CODE 2-1
CODE 3-0
CODE 3-1
CODE 4-0
CODE 4-1
CODE 5-0
CODE 5-1
CODE 6-0
CODE 6-1
CODE 6-2
CODE 6-3
CODE 7-0
CODE 7-1
CODE 8-0
CODE 8-1
CODE 9-0
CODE 9-1
CODE 0-0
CODE 0-1
CODE 0-2
CODE 0-3
CODE 0-4
3 long beeps for 3 seconds
1 short, 1 long beeps for 3 seconds
3 second beep
3 quick beeps for 3 seconds
5 quick beeps for 3 seconds
A key pad will beep when it is pressed.
No beep when a key pad is pressed.
The oven will beep when stage cook changes to the next stage.
No beep when stage cook changes to the next stage.
Maximum Cooking Time is 60 minutes.
Maximum Cooking Time is 10 minutes.
10 preprogrammed cooks for key pads (0~9)
200 preprogrammed cooks for key pads (0~199)
Display will turn off if a key isn't entered in 1 minute.
Display will turn off if a key isn't entered in 2 minutes.
Display will turn off if a key isn't entered in 3 minutes.
Display will turn off if a key isn't entered in 4 minutes.
Repeat feature is not allowed.
Repeat feature is allowed.
No END message after finishing a cooking.
END message will be left on the display during display-on time.
A user may use preprogrammed pads and manual time cook.
A user may use preprogrammed pads only.
Clean filter message will show up for 24 hours every 90 days.
Clean filter message will show up for 24 hours every 60 days.
Clean filter message will show up for 24 hours every 30 days.
Clean filter message will show up for 24 hours every 10 days.
The oven will not display clean filter message.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daewoo KOM-9F2CK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daewoo KOM-9F2CK in the language / languages: French as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info