19
The speedy cook function allows the oven to be cooked immediately on full power.
The speedy cook pad has been pre-programmed to increase in increments of 30 seconds up to a maximum time of 5
minutes.
SPEEDY COOK
1. Open the door.
• Oven stops operating.
• You can restart the oven by closing the door and touching START/SPEEDY COOK pad.
2. Touch the STOP/CLEAR pad.
• Oven stops operating.
• If you wish to cancel the cooking settings, touch the STOP/CLEAR pad again.
TO STOP THE OVEN WHILE THE OVEN IS OPERATING
If you see arcing, press STOP/CLEAR pad and correct the problem.
Arcing is the microwave term for sparks in the oven. Arcing is caused by:
• Metal or foil touching the side of the oven.
• Foil not molded to food (upturned edges act like antennas).
• Metal, such as twist-ties, poultry pins, or gold rimmed dishes, in the microwave.
• Recycled paper towels containing small metal pieces being used in the microwave.
ARCING
ABNORMAL MESSAGE
• If the inside temperature of the oven is higher than expected or the
temperature sensor doesn't work properly, "Err 2" message will be shown
in the display.
• Unplug the power and call our technical service.
• When the temperature sensor is disconnected,
"Err 3" message will be shown in the display.
• Unplug the power and call our technical service.
1. Touch START/SPEEDY COOK pad. The oven will be " : 30" is displayed. MW
indicator lights.
And the oven will start immediately. No
need to touch START/SPEEDY COOK
pad.
The oven light comes on and the turn table
starts rotaing and the time in the display will
count down in seconds.