75418

Daewoo DWD FD1411 Manual

39
Zoom out
Zoom in
Previous page
1/42
Next page
38
TROUBLESHOOTING GUIDE
MESSAGE
ERROR CAUSE SOLUTION
The water tap is closed. Open the water tap.
The filter of the valve inlet is clogged. Clean the filter of the valve inlet.
The valve inlet is an inferior product or broke down. Change the valve inlet.
The water level sensor (sensor pressure) is an inferior product Change the water level sensor
or broke down. (sensor pressure).
The drain motor works during water supply. Change the drain motor.
The PCB ASS’Y does not check the water level. Change the PCB ASS’Y.
The drain hose is kinked or clogged. Clean and straighten the drain hose.
The drain motor is an inferior product. Change the drain motor.
The valve inlet works during drain. Change the valve inlet
The water level sensor is an inferior product. Change the water level sensor.
The PCB ASS’Y does not check the water level. Change the PCB ASS’Y.
The RPM of drum did not reach the setting RPM Clean the drain pump filter.
within the setting time during the spin. Or restart spin only course.
The laundry is concentrated to one side of the drum during spin. Rearrange the laundry.
The Start/Hold button is pressed while the door is opened. Close the door.
The switch door lock is an inferior product. Change the switch door lock.
The PCB ASS’Y does not check the door lock. Change the PCB ASS’Y.
The water is supplied continuously due to an inferior valve inlet. Change the valve inlet.
The valve inlet is normal, but the water level sensor Change the water level sensor
(sensor pressure) is inferior. (sensor pressure).
The drain motor dose not work.
Change the drain motor.
(The drain motor is an inferior product or broke down.)
Water leaks from the tub or the hose drain. Check the leak of the tub or the hose drain.
Then change the tub or the hose drain.
The laundry is jammed between the gasket and the drum. Rearrange the laundry.
The PCB ASS’Y is an inferior product. Change the PCB ASS’Y.
The laundry is jammed between the gasket and the drum. Rearrange the laundry.
The motor is an inferior product. Change the motor.
The PCB ASS’Y is an inferior product. Change the PCB ASS’Y.
The motor spins into an opposite direction. Change the PCB ASS or the motor.
The motor hall IC is an inferior product or broke down. Change the motor hall IC or the motor.
The motor is not normally connected. Check the connector of the motor.
The motor does not work.
Change the motor.
(The motor is an inferior product or broke down.)
The water level sensor is an inferior product. Change the water level sensor.
The thermistor wash is an inferior product or broke down. Change the thermistor wash.
The thermistor wash is not connected normally. Check the connector of the thermistor wash.
WATER INLET
ERROR
DRAIN
ERROR
UNBALANCE
ERROR
DOOR OPEN
ERROR
OVERFLOW
ERROR
LEAKAGE
ERROR
HIGH VOLTAGE
ERROR
EMG ERROR
MOTOR
ERROR
SENSOR PRES-
SURE ERROR
THERMISTOR
WASH ERROR
IE
OE
UE
LE
E2
E4
E5
E6
E8
E9
H2
DIRECTION
ERROR
E7
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daewoo DWD FD1411 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daewoo DWD FD1411 in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info