370867

Daewoo dhc x 100 e Manual

10
Zoom out
Zoom in
Previous page
1/22
Next page
17
Before operating your machine, you need to set up the
speaker configuration and the delay time from the listening
position to each speaker.
Note
It is not necessary to set the parameters again once you have
completed the setup unless you change the speaker
configuration.
1. Press SPK SETUP to display the Front,
Center, Rear speaker and Subwoofer
configuration.
The front, center, rear speaker and
subwoofer configuration appears on the TV
screen.
1. Press Delay time button.
The digital out and delay time informations
appear on the display.
4. Press DELAY TIME to stop delay time
setup again.
If headphones are connected, remove the headphones.
1. Press TEST TONE.
Each speaker emits the test tone (pink
noise) in the following order:
3. When you have completed the
adjustment, press ENTER.
2. Press CH.LEVEL repeatedly to select
the speaker, then press
to raise or
lower the volume level until you have
an equal volume balance with the other
speakers at your listening position.
The volume level can be adjusted between
-12 and +12dB.
Adjusting Surround Speaker's Delay Time
Adjusting Each Speaker's Relative
Volume Balance – Test Tone
Speaker Setup
4. Repeat step 2~3 to adjust other
speaker’s volume balance.
To cancel the test tone, press TEST
TONE.
Note :
If satellite speakers connected to the machine, select Small
speaker configuration.
If you select the analogue signal(tuner, EXT video, etc)
function, the output of subwoofer speaker always operate.
16
Connecting the Power/Turning on the machine
Before connecting
Turning on the machine may cause a momentary power surge, which might interfere with other
electrical equipment such as computers. If this happens, use a wall outlet on a different circuit.
S
T
A
N
D
B
Y
/
O
N
DHC-X100E
1. Connect the power cord to a wall outlet.
The machine enters standby mode.
The STANDBY indicator lights up.
2. Press STANDBY/ON on the machine or POWER on
the remote controller.
The machine turns on. The STANDBY indicator turns off.
Note
To turn off the machine, press STANDBY/ON on the machine,
or POWER on the remote controller. The machine enters
standby mode.
Getting Started
2. Select the speaker to setup using .
3. Select the speaker configuration using
.
5. Press SPK SETUP to stop speaker
setup again.
SPEAKER POSN
DIGITAL OUT
FRONT POSN
CENTER POSN
REAR POSN
5FT/1.5M
4. Press ENTER on selected item.
3. Press ENTER on selected delay time.
-- SPEAKER SETUP PAGE --
FRONT
CENTER
REAR
SUBWOOFER
LARGE
SMALL
Note
When °ON° is selected in DIGITAL OUT menu, DELAY
TIME of each speaker can not be accessed.
2. Press
repeatedly to enter the
proper delay time to your listening position.
Re-try to each of the speakers.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daewoo dhc x 100 e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daewoo dhc x 100 e in the language / languages: English as an attachment in your email.

The manual is 3,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info