595166

D-Teg Smarty BX1000 Plus Manual

7
Zoom out
Zoom in
Previous page
1/22
Next page
Drive Partner for your Safety
10
BX1000 / BX1000 Plus User Guide
www.d-teg.com
11
FUNCTION OPERATION
Automatic start
Connect your vehicle’s power cable to the BX1000 / BX1000 Plus after starting the
vehicle. Then BX1000 / BX1000 Plus will be automatically started.
(Use the provided power cable.)
NOTE
The unit will not start recording immediately after power on. It takes around 1
minuteforthebuilt-inpowerbackupsystemtocharge.Thereafter,theinternalash
memory will be ready to record.
Event record (when Record Method set as “Event record”)
The event recording will be automatically started by G-sensor.
G-sensor sensitivity can be set with your PC.
Eacheventlecontains15secondsprior&5secondspostevent.
Manual record (when Record Method set as “Event record”)
Pressthe[RECORD]buttontobeginrecordingmanually.Eachmanuallecontains15
secondspriortoactivation&5secondspostactivation.
Continuous record (when Record Method set as “Normal record”)
The continuous recording will be automatically started after power on.
BX1000/BX1000Plusdoesn’tmakeaseparateeventleduringthecontinuous
recording . It will mark the Event area by the G-sensor or Record button in the
continuousrecordinglewhichcanbeeasilysearchedforduringplayback.
SD Memory Card Format
Removethepowerrst.PresstheSDCARDFORMATbuttonandhold.Then
connectthepowerforinitialisation.Oncecomplete,allvideo&logleswillbe
deletedandthecongurationswilldefaulttothefactorysettings.
Built-in power backup (Super Capacitor)
When power to the unit is interrupted, BX1000 / BX1000 Plus creates the last
leusingtheinternalSuperCapacitor.
BLUE LED
(RECORD)
The blue LED shows the power is on. The blue LED blink during recording.
RED LED
(OVERWRITE)
The red LED will be turned on during overwriting.
Buzzer
“Beep” sound will occur when recording starts (this can be turned off at setup page on
PC viewer, if required) and to signal a system error.
When Record Method set as “Event record”
1. Connect your vehicle’
s power cable to the BX1000 / BX1000 Plus after starting the
vehicle.
2.BlueLED&RedLEDwillbeslowlyblinkingsimultaneouslyandthentheBlue
LED will remain on. The Blue LED light means BX1000 / BX1000 Plus is ready for the
event recording.
3. The event recording will automatically begin by the G-sensor with one short
“Beep” sound.
4. The manual recording will start by pressing the [RECORD] button.
NOTE
Multiple impacts coverage
Flashmemorycapturesthevideodatafromthesecondimpactevenastherst
impactisstilloccurring.Itwillstartwriting,immediatelyaftertherstrecordingis
nished.
When Record Method set as “Normal record”
1. Connect your vehicle’s power cable to the BX1000 / BX1000 Plus after
starting the vehicle.
2.BlueLED&RedLEDwillbeslowlyblinkingsimultaneouslyandthentheBlueLED
willremainonandashevery5seconds.
3.BlueLEDlightashingevery5secondsmeansBX1000/BX1000Plusis
recording continuously.
4. The continuous recording (normal recording) will automatically begin just
after the power is turned on.
5. The manual recording that started by pressing the [RECORD] button or the event
recordingbyG-sensormakeaeventmakinginthecontinuousrecordingle.
Take out SD memory card
Turn off the power and then check the BLUE LED light. Once the LED light is off, take
out the SD memory card.
Insert SD memory card
Turn off the power and then check the BLUE LED light. Once the LED light is off, insert
the SD memory card.
System Error Buzzer
A‘BeepBeep’soundwilloccurandtheBLUE&REDLEDlightswillblink
simultaneously when there is a system error or SD card is not inserted.
Check the SD memory card when this occurs.
NOTE
PC Viewer Software is pre-loaded on the SD card. Please ensure you install
the software to your PC before formating the card
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for D-Teg Smarty BX1000 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of D-Teg Smarty BX1000 Plus in the language / languages: English as an attachment in your email.

The manual is 7,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info