595172
7
Zoom out
Zoom in
Previous page
1/34
Next page
E
14 15
LCD Display ON/OFF
You can turn the LCD monitor off and on by pressing [OK] during a recording.
Recording will continue regardless of the LCD’s status.
You can also set the LCD to automatically turn off after 10 seconds by
setting the LCD Auto Off to ON either through the [Device Setting] tab on
the PC Viewer or go to [Video Settings] on the device.
Modes
CX1000 has three modes: Video, Photo, and Playback. Modes can be
changed by pressing the [OK] button while on standby.
In Video mode, press [REC] to start recording and [MENU] to stop.
In Photo mode, press [REC] to take photos.
In Playback mode, press [MENU] to enter Playback Settings and Folder
Change. Use the arrow buttons to change folders. Once you have accessed
the folder of choice, use the arrows buttons to change files. During Video
Playback press [REC] to play, [MENU] to stop, and arrow buttons to fast
forward or rewind.
Settings
CX1000 has four settings: General, Video, Photo, and Playback. General
Settings can be accessed in any mode by pressing [MENU] and the other
mode settings can be accessed by pressing [MENU] while in each mode. For
Video Settings, video recording needs to be discontinued before settings can
be accessed. Press the arrow buttons to move between the selections, [OK]
to select, and [MENU] to deselect and return to previous stage.
Battery
CX1000 comes with a built-in lithium polymer battery and can be turned on
for 15 ~ 30utes without external power.
Delayed Shutdown
You can choose to continue recording during quick stopovers by turning the
delayed shutdown function on. When activated, the CX1000 will continue
recording for max 5utes, depending on the battery life, after external power
is cut off.
Parking Mode
You can use the CX1000 as a surveillance camera while your car is parked.
For this function to work you need to use a permanent power source that
will not disconnect when the ignition is turned off. You need to then go to
Video Settings and turn this function on. With the Parking Mode activated,
if your vehicle is still for more than 5utes, CX1000 will recognize this as being
parked and will automatically change modes. In Parking Mode, recording will
be at 1 FPS, the LCD will turn off, and the red recording LED will blink. Once
your vehicle starts moving, recording will return to its original setting.
Firmware Upgrade
To upgrade your CX1000, please follow these steps. The device will not
upgrade unless an external power is connected.
1. Download the firmware you wish to install from our website: www.d-teg.
com or distributor.
2. Extract the micro SD card from the device and plug into your PC.
3. Access the card and create a folder called “program”
4. Copy the firmware file (CX1000_X.X.X.bin) into the “program” folder
5. Plug in the micro SD card into the device and power on.
6. The two LED lights will blink while upgrading.
7. After upgrade, the device will automatically reboot for use.
Recording
Time
GPS
connection
Recording
Video Mode
WARNING
Cutting off power during the upgrade will seriously
damage the device. Leave the external power connected, car ignition
on, and device power on during upgrade.
Operation BasicsOperation Basics
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for D-Teg CX1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of D-Teg CX1000 in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info