595172
6
Zoom out
Zoom in
Previous page
1/34
Next page
E
12 13
Automatic Start
The CX1000 is designed to automatically start when power is supplied. If
the cigarette lighter plug is correctly connected the device will power up
automatically when the vehicle ignition is turned on.
Language Selection
When the CX1000 is turned on for
the first time, follow the onscreen
instructions to set the language
using the arrow buttons and then
confirm by pressing the OK button.
Automatic Booting and Record
When connected properly, CX1000 will automatically boot and start
recording when the ignition is turned on. Booting may require up to 15
seconds, recording will start immediately after this process.
Recording Modes
1. Normal (Continuous) is the main mode of recording. Resolution and frame
rates should be set per your preference and considering the size of the
micro SD card. Changes in configuration can be made through the [Device
Setting] tab on the PC Viewer or go to [Video Settings] on the device.
2. Event (Shock and Panic) is a supplementary mode of recording that
activates when triggered by either an impact or a push of the [REC] button.
In such events, 15 seconds of pre and post event will be stored separately
in the micro SD card under [gsnr] and [recsw] folders respectively. A total of
10 events can be stored in each folder and will be, depending on settings,
overwritten or not recorded when full.
A. Shock triggered video and data will be recorded automatically when the
g-sensor senses a change in g-force of more than the set limit. This limit
can be set through the [Device Setting] tab on the PC Viewer or go to
[Video Settings] on the device.
B. Panic video and data will be recorded when the [REC] button is pushed.
NOTE
The default setting for record is “normal (continuous)” at
30 FPS, 720p resolution. This allows for separate event and panic
recordings. At this setting, the storage medium may fill up quickly
and will, depending on the settings, overwrite or stop recording when
full. To avoid losing valuable data, back up all relevant data to a
separate storage medium immediately after each incident.
NOTE
When recording at 30FPS, 1080p HD resolution, separate
Event files (Shock and Panic) will not be stored. If you wish to keep
separate event files, change the settings to a lower resolution or
frame rate, e.g. 10FPS, 1080p HD or 30FPS, 1080p
Operation BasicsGetting Started
Timezone Setting
Check your time zone’s time offset
and use the arrow keys to select the
correct one.
Examples
Seoul, Tokyo: +9 / Sydney: +10
New York: -5 / Chicago: -6
London: 0 / Paris: +1
NOTE
Recording will start immediately once Timezone is set.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for D-Teg CX1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of D-Teg CX1000 in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info