Manual D-Link VDI-624 - AirPlus Xtreme G (page 5 of 91) (English)

629197

Zoom out

Zoom in

1/91

High-Speed 2.4 GHz

Manual

Building Networks for People

Wireless Router

D-Link AirPlus Xtreme G

VDI-624VDI-624

VDI-624

Version 2.43

Contents

Package Contents ................................................................................3

Introduction............................................................................................4

Wireless Basics ....................................................................................8

Getting Started ....................................................................................11

Using the Configuration Menu..............................................................12

Networking Basics ..............................................................................39

Troubleshooting...................................................................................54

Technical Specifications ......................................................................61

Frequently Asked Questions ................................................................64

Warranty..............................................................................................88

Internet Explorer Version 6.0 or Netscape Navigator

Version 6.0 and Above

Contents of Package:

D-Link AirPlus XTREME G VDI-624

High-Speed 2.4GHz Wireless Router

Power Adapter-DC 5V, 2.5A

Manual and Warranty on CD

2 Ethernet Cables (All the Ethernet ports are Auto-MDIX)

Computers with Windows, Macintosh, or Linux-based

operating systems with an installed Ethernet adapter

Package Contents

Note: Using a power supply with a different voltage rating than the one included with the

VDI-624 will cause damage and void the warranty for this product.

If any of the above items are missing, please contact your reseller.

System Requirements for Configuration:



Ethernet-Based High Speed Internet Connection



Introduction

The D-Link AirPlus Xtreme G VDI-624 High-Speed Wireless Router is an 802.11g high-

performance, wireless router that supports high-speed wireless networking at home, at

work or in public places.

Unlike most routers, the VDI-624 provides data transfers at up to 108 Mbps (compared

to the standard 54 Mbps) when used with other D-Link AirPlus Xtreme G products. The

802.11g standard is backwards compatible with 802.11b products. This means that you

do not need to change your entire network to maintain connectivity. You may sacrifice

some of 802.11g’s speed when you mix 802.11b and 802.11g devices, but you will not

lose the ability to communicate when you incorporate the 802.11g standard into your

802.11b network. You may choose to slowly change your network by gradually replacing

the 802.11b devices with 802.11g devices .

In addition to offering faster data transfer speeds when used with other 802.11g products,

the VDI-624 has the newest, strongest, most advanced security features available today.

When used with other 802.11g WPA (WiFi Protected Access) and 802.1x compatible

products in a network with a RADIUS server, the security features include:

WPA: Wi-Fi Protected Access authorizes and identifies users based on a secret key

that changes automatically at a regular interval. WPA uses TKIP (Temporal

Key Integrity Protocol) to change the temporal key every 10,000 packets (a

packet is a kind of message transmitted over a network.) This insures much

greater security than the standard WEP security. (By contrast, the older WEP

encryption required the keys to be changed manually.)

802.1x: Authentication is a first line of defense against intrusion. In the Authentication

process the server verifies the identity of the client attempting to connect to the

network. Unfamiliar clients would be denied access.

For home users that will not incorporate a RADIUS server in their network, the security

for the VDI-624, used in conjunction with other 802.11g products, will still be much

stronger than ever before. Utilizing the Pre Shared Key mode of WPA, the VDI-624 will

obtain a new security key every time it connects to the 802.11g network. You only need

to input your encryption information once in the configuration menu. No longer will you

have to manually input a new WEP key frequently to ensure security, with the VDI-624,

you will automatically receive a new key every time you connect, vastly increasing the

safety of your communications.

Connections

All Ethernet Ports (WAN and LAN)

are auto MDI/MDIX, meaning you can

use either a straight-through or a

crossover Ethernet cable.

The Auto MDI/

MDIX WAN port is

the connection for

the Ethernet cable

to your high

speed internet

connection

Auto MDI/MDIX

LAN ports

automatically sense

the cable type when

connecting to

Ethernet-enabled

computers.

Receptor

for the

Power

Adapter

Pressing the

Reset Button

restores the

router to its

original factory

default settings.

LEDs

WLAN LED

A solid light

indicates that the

wireless segment

is ready. This LED

blinks during

wireless data

transmission.

POWER LED

A solid light

indicates a proper

connection to the

power supply.

STATUS

A blinking light

indicates that the

VDI-624 is ready.

WAN LED

A solid light indi-

cates connection

on the WAN port.

This LED blinks

during data trans-

mission.

LOCAL

NETWORK LED

A solid light indicates

a connection to an

Ethernet-enabled

computer on ports 1-

4. This LED blinks

during data trans-

mission.

Features

WPA (Wi Fi Protected Access) authorizes and identifies users based on a

secret key that changes automatically at a regular interval, for example:

802.1x Authentication in conjunction with the RADIUS server verifies the

identity of would be clients



TKIP (Temporal Key Integrity Protocol), in conjunction with a RADIUS

server, changes the temporal key every 10,000 packets, ensuring greater

security

Pre Shared Key mode means that the home user, without a RADIUS

server, will obtain a new security key every time the he or she connects

to the network, vastly improving the safety of communications on the

network



Backwards compatible with the 802.11b standard to provide a wireless data

rate of up to 11Mbps



Fully compatible with the 802.11g standard to provide a wireless data rate of

up to 108Mbps



Utilizes OFDM technology (Orthogonal Frequency Division Multiplexing)



User-friendly configuration and diagnostic utilities

Operates in the 2.4GHz frequency range



Connects multiple computers to a high speed internet connection to share

the Internet connection



IP Filtering



Advanced Firewall features



DHCP server enables all networked computers to automatically receive IP

addresses



Web-based interface for Managing and Configuring

Access Control to manage users on the network



Supports special applications that require multiple connections



Equipped with 4 10/100 Ethernet ports, 1 WAN port, Auto MDI/MDIX



URL Filtering



Domain Blocking



Scheduling



Supports NAT with VPN pass-through, providing added security



MAC Filtering

Wireless Basics

D-Link wireless products are based on industry standards to provide easy-to-use and

compatible high-speed wireless connectivity within your home, business or public access

wireless networks. D-Link wireless products will allow you access to the data you want,

when and where you want it. You will be able to enjoy the freedom that wireless networking

brings.

A WLAN is a cellular computer network that transmits and receives data with radio

signals instead of wires. WLANs are used increasingly in both home and office

environments, and public areas such as airports, coffee shops and universities. Innovative

ways to utilize WLAN technology are helping people to work and communicate more

efficiently. Increased mobility and the absence of cabling and other fixed infrastructure

have proven to be beneficial for many users.

Wireless users can use the same applications they use on a wired network. Wireless

adapter cards used on laptop and desktop systems support the same protocols as

Ethernet adapter cards.

People use wireless LAN technology for many different purposes:

Mobility - Productivity increases when people have access to data in any location

within the operating range of the WLAN. Management decisions based on real-time

information can significantly improve worker efficiency.

Low Implementation Costs – WLANs are easy to set up, manage, change and

relocate. Networks that frequently change can benefit from WLANs ease of

implementation. WLANs can operate in locations where installation of wiring may be

impractical.

Installation and Network Expansion - Installing a WLAN system can be fast

and easy and can eliminate the need to pull cable through walls and ceilings. Wireless

technology allows the network to go where wires cannot go - even outside the home or

office.

Scalability – WLANs can be configured in a variety of topologies to meet the needs of

specific applications and installations. Configurations are easily changed and range

from peer-to-peer networks suitable for a small number of users to larger infrastructure

networks to accommodate hundreds or thousands of users, depending on the number

of wireless devices deployed.

Inexpensive Solution - Wireless network devices are as competitively priced as

conventional Ethernet network devices.

Standards-Based Technology

The VDI-624 Wireless Broadband Router utilizes the new 802.11g standard.

The IEEE 802.11g standard is an extension of the 802.11b standard. It increases the

data rate up to 54Mbps within the 2.4GHz band, utilizing OFDM technology.

This means that in most environments, within the specified range of this device, you will

be able to transfer large files quickly or even watch a movie in MPEG format over your

network without noticeable delays. This technology works by transmitting high-speed

digital data over a radio wave utilizing OFDM (Orthogonal Frequency Division Multiplexing)

technology. OFDM works by splitting the radio signal into multiple smaller sub-signals

that are then transmitted simultaneously at different frequencies to the receiver. OFDM

reduces the amount of crosstalk (interference) in signal transmissions.

The VDI-624 is backwards compatible with 802.11b devices. This means that if you have

an existing 802.11b network, the devices in that network will be compatible with 802.11g

devices at speeds of up to 11Mbps in the 2.4GHz range.

Wireless Basics (continued)

Installation Considerations

The D-Link AirPlus Xtreme G VDI-624 lets you access your network, using a wireless

connection, from virtually anywhere within its operating range. Keep in mind, however,

that the number, thickness and location of walls, ceilings, or other objects that the

wireless signals must pass through, may limit the range. Typical ranges vary depending

on the types of materials and background RF (radio frequency) noise in your home or

business. The key to maximizing wireless range is to follow these basic guidelines:

Keep the number of walls and ceilings between the VDI-624 and other network

devices to a minimum - each wall or ceiling can reduce your D-Link wireless

product’s range from 3-90 feet (1-30 meters.) Position your devices so that

the number of walls or ceilings is minimized.

Be aware of the direct line between network devices. A wall that is 1.5 feet

thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter)

thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position

devices so that the signal will travel straight through a wall or ceiling (instead

of at an angle) for better reception.

Keep your product away (at least 3-6 feet or 1-2 meters) from electrical

devices or appliances that generate extreme RF noise.

Building Materials can impede the wireless signal - a solid metal door or

aluminum studs may have a negative effect on range. Try to position wireless

devices and computers with wireless adapters so that the signal passes

through drywall or open doorways and not other materials.

Please remember that D-Link AirPlus Xtreme G wireless devices are pre-configured

to connect together, right out of the box, with their default settings.

You will need broadband Internet access (a High Speed Internet Connection into

your home or office).

Connect your high speed internet connection to the VDI-624 Wireless Broad-

band Router.

If you are connecting a desktop computer to your network, install the D-Link

AirPlus Xtreme G VDWL-G120 wireless USB adapter into an available USB

Connector on your desktop computer.

(See the printed Quick Installation Guide included with the network adapter.)

Install the D-Link VDWL-G650 wireless Cardbus adapter into a laptop computer.

(See the printed Quick Installation Guide included with the VDWL-G650.)

Getting Started

For a typical wireless setup at home (as shown above),

please do the following:

Setting up a

Wireless

Infrastructure

Network

Install the D-Link DFE-530TX+ adapter into a desktop computer. The four

Ethernet LAN ports of the VDI-624 are Auto MDI/MDIX and will work with both

Straight-Through and Cross-Over cable.

(See the printed Quick Installation Guide included with the DFE-530TX+.)

Whenever you want to configure your network or the

VDI-624, you can access the Configuration Menu by

opening the web-browser and typing in the IP Address

of the VDI-624. The VDI-624 default IP Address is

shown at right:

Open the web browser

Type in the IP Address of the Router (http://192.168.0.1)



Using the Configuration Menu

Home > Wizard

The Home>Wizard

screen will appear.

Please refer to the

Quick Installation

Guide for more infor-

mation regarding the

Setup Wizard.

Note: if you have changed the default IP Address assigned

to the VDI-624, make sure to enter the correct IP Address.



These buttons appear

on most of the configu-

ration screens in this

section. Please click on

the appropriate button

at the bottom of each

screen after you have

made a configuration

change.

http://192.168.0.1



Type admin in the User Name field

Type password in the Password field

Click OK



Note: if you have changed the default User Name and/or

Password assigned to the VDI-624, make sure to enter the

correct UserName and/or Password.

Using the Configuration Menu (continued)

Home > Wireless

Keys 1-4-

Input up to 4 WEP keys; select the one you wish to use.

Key Type-

Select HEX or ASCII.

WEP Encryption-

Select the level of encryption desired: 64-bit, or 128-bit.

SSID-

Service Set Identifier (SSID) is the name designated for a spe-

cific wireless local area network (WLAN). The SSID’s factory

default setting is default. The SSID can be easily changed to

connect to an existing wireless network or to establish a new

wireless network.

WEP-

Wired Equivalent Privacy (WEP) is a wireless security protocol

for Wireless Local Area Networks (WLAN). WEP provides secu-

rity by encrypting the data that is sent over the WLAN. Select

Enabled or Disabled. Disabled is the default setting. (Note: If

you enable encryption on the VDI-624 make sure to also enable

encryption on all the wireless clients or wireless connection will

not be established.)

Channel-

6 is the default channel. All devices on the network must share

the same channel. (Note: The wireless adapters will automati-

cally scan and match the wireless setting.)

Using the Configuration Menu (continued)

Home > WAN > Dynamic IP Address

DI-754

Host Name-

The Host Name is optional but may be required by some ISPs.

The default host name is the device name of the Router and may

be changed.

MAC Address-

The default MAC Address is set to the WAN’s physical inter-

face MAC address on the Broadband Router. It is not recom-

mended that you change the default MAC address unless re-

quired by your ISP.

Clone

MAC Address-

The default MAC address is set to the WAN’s physical interface

MAC address on the Broadband Router. You can use the “Clone

MAC Address” button to copy the MAC address of the Ethernet

Card installed by your ISP and replace the WAN MAC address

with the MAC address of the router. It is not recommended that

you change the default MAC address unless required by your

ISP.

Dynamic

IP Address-

Choose Dynamic IP Address to obtain IP Address information

automatically from your ISP. Select this option if your ISP does

not give you any IP numbers to use.

Primary/

Secondary DNS

Address-

Enter an MTU value only if required by your ISP. Otherwise, leave

it at the default setting.

MTU-

Enter a DNS Address if you do not wish to use the one

provided by your ISP.

Home > WAN > Static IP Address

Static IP Address-

IP Address-

Subnet Mask-

ISP

Gateway Address-

Primary

DNS Address-

Secondary

DNS Address-

Choose Static IP Address if all WAN IP information is provided to

you by your ISP. You will need to enter in the IP address, subnet

mask, gateway address, and DNS address(es) provided to you

by your ISP. Each IP address entered in the fields must be in the

appropriate IP form, which are four octets separated by a dot

(x.x.x.x). The Router will not accept the IP address if it is not in

this format.

Input the public IP Address provided by your ISP.

Input your Subnet mask. (All devices in the network must have

the same subnet mask.)

Input the public IP address of the ISP to which you are

connecting.

Input the primary DNS (Domain Name Server) IP address

provided by your ISP.

This is optional.

Enter an MTU value only if required by your ISP. Otherwise, leave

it at the default setting.

MTU-

Using the Configuration Menu (continued)

Home > WAN > PPPoE

IP Address-

This option is only available for Static PPPoE. Enter the static IP

Address for the PPPoE connection.

(Continued on the next page)

User Name-

Your PPPoE username provided by your Service Provider.

Service Name- Enter the Service Name provided by your Service Provider

(optional).

Retype Password-

Re-enter the PPPoE password

PPPoE-

Static PPPoE-you have an assigned (static) IP Address.

Choose this option if your Service Provider uses PPPoE.

Dynamic PPPoE- receive an IP Address automatically from your ISP.

Primary DNS

Address-

Primary DNS IP address provided by our ISP

Secondary DNS

Address-

This option is only available for Static PPPoE. Enter the static IP

Address for the PPPoE connection.

Choose PPPoE (Point

to Point Protocol over

Ethernet) if your ISP

uses a PPPoE con-

nection. Your ISP will

provide you with a

username and pass-

word. Select Dynamic

PPPoE to obtain an IP

address automatically

for your PPPoE con-

nection. Select Static

PPPoE to use a static

IP address for your

PPPoE connection.

Please be sure to

remove any

existing

PPPoE client

software

installed on your

computers.

Using the Configuration Menu (continued)

Home > WAN > PPPoE continued

Home > LAN

LAN is short for Local Area Network. This is considered your internal network. These are

the IP settings of the LAN interface for the VDI-624. These settings may be referred to as

Private settings. You may change the LAN IP address if needed. The LAN IP address is

private to your internal network and cannot be seen on the Internet.

Auto-reconnect-

If enabled, the VDI-624 will automatically connect to your ISP

after your system is restarted or if the PPPoE connection is

dropped.

MTU-

Maximum Transmission Unit-1492 is the default setting-you may

need to change the MTU for optimal performance with your

specific ISP.

Local Domain-

This field is optional. Enter in the local domain name.

Subnet Mask-

The subnet mask of the LAN interface.

The default subnet mask is 255.255.255.0

IP Address-

The IP address of the LAN interface. The default IP address is:

192.168.0.1

Using the Configuration Menu (continued)

Home > DHCP

DHCP stands for Dynamic Host Control Protocol. The VDI-624 has a built-in DHCP

server. The DHCP Server will automatically assign an IP address to the computers on

the LAN/private network. Be sure to set your computers to be DHCP clients by setting

their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your

computers on, they will automatically load the proper TCP/IP settings provided by the

VDI-624. The DHCP Server will automatically allocate an unused IP address from the IP

address pool to the requesting computer. You must specify the starting and ending

address of the IP address pool.

DHCP Server-

Select Enabled or Disabled. The default setting is Enabled.

Starting

IP Address-

The starting IP address for the DHCP server’s IP assignment

Ending

IP Address-

The ending IP address for the DHCP server’s IP assignment

Lease Time-

The length of time for the IP lease. Enter the Lease time. The

default setting is one hour

DI-754

Advanced > Virtual Server

Using the Configuration Menu (continued)

The VDI-624 is also capable of port-redirection, meaning incoming traffic to a

particular port may be redirected to a different port on the server computer.

Each virtual service that is created will be listed at the bottom of the screen in the

Virtual Servers List. There are pre-defined virtual services already in the table. You

may use them by enabling them and assigning the server IP to use that particular

virtual service.

The VDI-624 can be configured as a virtual server so that remote users accessing

Web or FTP services via the public IP address can be automatically redirected to

local servers in the LAN (Local Area Network).

The VDI-624 firewall feature filters out unrecognized packets to protect your LAN

network so all computers networked with the VDI-624 are invisible to the outside

world. If you wish, you can make some of the LAN computers accessible from the

Internet by enabling Virtual Server. Depending on the requested service, the VDI-624

redirects the external service request to the appropriate server within the LAN

network.

Advanced > Virtual Server continued

Using the Configuration Menu (continued)

Example #1:

Protocol Type-

The protocol used for the virtual service.

Public Port-

The port number on the WAN (Wide Area Network) side that will

be used to access the virtual service.

Private Port-

The port number of the service used by the Private IP computer.

Schedule-

The schedule of time when the virtual service will be enabled.

The schedule may be set to Always, which will allow the

particular service to always be enabled. If it is set to Time,

select the time frame for the service to be enabled. If the

system time is outside of the scheduled time, the service will

be disabled.

Virtual Server-

Select Enabled or Disabled.

Name-

Enter the name referencing the virtual service.

Private IP-

The server computer in the LAN (Local Area Network) that will be

providing the virtual services.

If you have a Web server that you wanted Internet users to

access at all times, you would need to enable it. Web

(HTTP) server is on LAN (Local Area Network) computer

192.168.0.25. HTTP uses port 80, TCP.

Name: Web Server

Private IP: 192.168.0.25

Protocol Type: TCP

Private Port: 80

Public Port: 80

Schedule: always

Example #2:

If you have an FTP server that you wanted Internet users to access by WAN port

2100 and only during the weekends, you would need to enable it as such. FTP

server is on LAN computer 192.168.0.30. FTP uses port 21, TCP.

Name: FTP Server

Private IP: 192.168.0.30

Protocol Type: TCP

Private Port: 21

Public Port: 2100

Schedule: From: 01:00AM to 01:00AM, Sat to Sun

Using the Configuration Menu (continued)

Advanced > Virtual Server continued

Click on this icon to edit the virtual service

Click on this icon to delete the virtual service

All Internet users who want to access this FTP Server

must connect to it from port 2100. This is an example of

port redirection and can be useful in cases where there

are many of the same servers on the LAN network.

Using the Configuration Menu (continued)

Advanced > Applications

Some applications require multiple connections, such as Internet gaming, video

conferencing, Internet telephony and others. These applications have difficulties

working through NAT (Network Address Translation). Special Applications makes

some of these applications work with the VDI-624. If you need to run applications that

require multiple connections, specify the port normally associated with an application

in the “Trigger Port” field, select the protocol type as TCP or UDP, then enter the

public ports associated with the trigger port to open them for inbound traffic.

The VDI-624 provides some predefined applications in the table on the bottom of the

web page. Select the application you want to use and enable it.

Note! Only one PC can use each Special Application tunnel.

Name:

This is the name referencing the special application.

Trigger Port:

This is the port used to trigger the application. It can be either

a single port or a range of ports.

Trigger Type: This is the protocol used to trigger the special application.

Public Port:

This is the port number on the WAN side that will be used to

access the application. You may define a single port or a

range of ports. You can use a comma to add multiple ports or

port ranges.

Public Type:

This is the protocol used for the special application.

Using the Configuration Menu (continued)

Advanced > Filters > IP Filters

Filters are used to deny or allow LAN (Local Area Network) computers from accessing

the Internet. The VDI-624 can be setup to deny internal computers by their IP or MAC

addresses. The VDI-624 can also block users from accessing restricted web sites.

This is the schedule of time when the IP Filter will be enabled.

Schedule:

Select the protocol type.

Protocol Type:

Use IP Filters to deny LAN IP addresses from accessing the

Internet. You can deny specific port numbers or all ports for

the specific IP address.

IP Filters:

The single port or port range that will be denied access to the

Internet.

Port:

The IP address of the LAN computer that will be denied

access to the Internet.

IP:

Using the Configuration Menu (continued)

Advanced > Filters > URL Blocking

Filters-

URL Blocking is used to deny LAN computers from accessing specific web sites by

the URL. A URL is a specially formatted text string that defines a location on the

Internet. If any part of the URL contains the blocked word, the site will not be

accessible and the web page will not display. To use this feature, enter the text string

to be blocked and click Apply. The text to be blocked will appear in the list. To

delete the text, just highlight it and click Delete.

Select the filter you wish to use; in this case, URL Blocking

was chosen.

Keywords-

Block URLs which contain keywords listed below.

Enter the keywords in this space.

URL Blocking-

Select Enabled or Disabled.

Using the Configuration Menu

Advanced > Filters > MAC Filters

Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network)

computers by their MAC addresses from accessing the Network. You can either manually

add a MAC address or select the MAC address from the list of clients that are currently

connected to the Broadband Router.

MAC Filters-

Choose Disable MAC filters; allow MAC addresses listed be-

low; or deny MAC addresses listed below.

Filters-

Name-

Enter the name here.

MAC Address-

Enter the MAC Address.

DHCP Client-

Select a DHCP client from the pull-down list; click Clone to

copy that MAC Address.

Select the filter you wish to use; in this case, MAC filters was

chosen.

(continued)

Using the Configuration Menu

Advanced > Filters > Domain Blocking

Filters-

Domain Blocking-

Blocked Domains-

Permitted

Domains-

Domain Blocking is used to allow or deny LAN (Local Area Network) computers from

accessing specific domains on the Internet. Domain blocking will deny all requests to a

specific domain such as http and ftp. It can also allow computers to access specific

sites and deny all other sites.

Select the filter you wish to use; in this case, Domain Blocking

was chosen.

Disabled-

Allow-

Deny-

Enter the Permitted Domains in this field.

Enter the Blocked Domains in this field.

Select Disabled to disable Domain Blocking.

Allows users to access all domains except Blocked Domains.

Denies users access to all domains except

Permitted Domains.

(continued)

Using the Configuration Menu (continued)

Advanced > Firewall

Firewall Rules is an advanced feature used to deny or allow traffic from passing

through the VDI-624. It works in the same way as IP Filters with additional settings.

You can create more detailed access rules for the VDI-624. When virtual services are

created and enabled, it will also display in Firewall Rules. Firewall Rules contain all

network firewall rules pertaining to IP (Internet Protocol).

In the Firewall Rules List at the bottom of the screen, the priorities of the rules are

from top (highest priority) to bottom (lowest priority.)

Note:

The VDI-624 MAC Address filtering rules have precedence over the Firewall Rules.

Firewall Rules-

Enable or disable the Firewall

Name- Enter the name

Action-

Allow or Deny

Source-

Enter the IP Address range

Schedule-

Select Always or enter the Time Range.

Destination-

Enter the IP Address range; the Protocol;

and the Port Range

Advanced > DMZ

Using the Configuration Menu (continued)

If you have a client PC that cannot run Internet applications properly from behind the

VDI-624, then you can set the client up for unrestricted Internet access. It allows a

computer to be exposed to the Internet. This feature is useful for gaming purposes.

Enter the IP address of the internal computer that will be the DMZ host. Adding a

client to the DMZ (Demilitarized Zone) may expose your local network to a variety of

security risks, so only use this option as a last resort.

DMZ-

Enable or Disable the DMZ. The DMZ (Demilitarized Zone)

allows a single computer to be exposed to the internet. By

default the DMZ is disabled.

IP Address-

Enter the IP Address of the computer to be in the DMZ.

Using the Configuration Menu (continued)

Advanced > Performance

Preamble Type-

Select Short or Long Preamble. The Preamble defines the

length of the CRC block (Cyclic Redundancy Check is a com-

mon technique for detecting data transmission errors) for com-

munication between the wireless router and the roaming wire-

less network adapters. Note: High network traffic areas should

use the shorter preamble type.

Beacon Interval-

Beacons are packets sent by an Access Point to synchronize a

wireless network. Specify a value. 100 is the default setting and

is recommended.

RTS Threshold-

This value should remain at its default setting of 2432. If inconsis-

tent data flow is a problem, only a minor modification should be

made.

Fragmentation-

The fragmentation threshold, which is specified in bytes, deter-

mines whether packets will be fragmented. Packets exceeding

the 2346 byte setting will be fragmented before transmission.

2346 is the default setting.

DTIM interval-

(Delivery Traffic Indication Message) 3 is the default setting. A

DTIM is a countdown informing clients of the next window for

listening to broadcast and multicast messages.

Wireless

Performance-

Displayed in this window are

the Wireless Performance

features for the Access Point

portion of the VDI-624.

TX Rates-

Auto is the default selection.

Select from the drop down

menu.

SSID Broadcast-

Choose Enabled to broadcast the SSID across the network.

All devices on a network must share the same SSID (Service

Set Identifier) to establish communication. Choose Disabled

if you do not wish to broadcast the SSID over the network.

Super G Mode-

Super G is a group of performance enhancement features that

increase end user application throughput in an 802.11g network.

Super G is backwards compatible to standard 802.11g devices.

For top performance, all wirelss devices on the network should

be Super G capable. Select either Disabled, Super G without

Turbo, Super G with Dynamic Turbo, or Super G with Static Turbo.

Disabled-

Standard 802.11g support, no enhanced capabilities.

Super G without

Turbo-

Capable of Packet Bursting, FastFrames, Compression, and no

Turbo mode.

Super G with

Dynamic Turbo-

Capable of Packet Bursting, FastFrames, Compression, and

Dynamic Turbo. This setting is backwards compatible with non-

Turbo (legacy) devices. Dynamic Turbo mode is only enabled

when all nodes on the wireless network are Super G with Dy-

namic Turbo enabled.

802.11g only mode-

Select this mode to restrict your network to only those devices

that employ the 802.11g standard. Enabling this mode will en-

sure that you maintain the highest connectivity rate, unhampered

by any connection to an 802.11b device.

CTS Mode-

CTS (Clear To Send) is a function used to minimize collisions

among wireless devices on a wireless local area network (LAN).

CTS will make sure the wireless network is clear before a wire-

less client attempts to send wireless data. Enabling CTS will

add overhead and may lower wireless throughput.

Auto-

CTS will monitor the wireless network and automati-

cally decide whether to implement CTS based on

the amount of traffic and collisions that occurs on

the wireless network.

Always-

CTS will always be used to make sure the wireless

LAN is clear before sending data.

None-

CTS is typically used in a pure 802.11g environment.

If CTS is set to “None” in a mixed mode environment

populated by 802.11b clients, wireless collisions may

occur frequently.

Super G with

Static Turbo-

Capable of Packet Bursting, FastFrames, Compression, and

Static Turbo. This setting is not backwards compatible with non-

Turbo (legacy) devices. Static turbo mode is always on and is

only enabled when all nodes on the wireless network is Super G

with Static Turbo enabled.

Using the Configuration Menu (continued)

Advanced > Performance (continued)

Using the Configuration Menu (continued)

Tools> Admin

At this page, the VDI-624 administrator can change the system password. There are two

accounts that can access the Broadband Router’s Web-Management interface. They

are admin and user. Admin has read/write access while user has read-only access. User

can only view the settings but cannot make any changes.

Remote Management- Remote management allows the VDI-624 to be configured

from the Internet by a web browser. A username and password is still required to access

the Web-Management interface. In general, only a member of your network can browse

the built-in web pages to perform Administrator tasks. This feature enables you to per-

form Administrator tasks from the remote (Internet) host.

IP Address- The Internet IP address of the computer that has access to the Broadband

Router. If you input an asterisk (*) into this field, then any computer will be able to access

the Router. Putting an asterisk (*) into this field would present a security risk and is not

recommended.

Port- The port number used to access the Broadband Router.

Example- http://x.x.x.x:8080 where x.x.x.x is the WAN IP address of the Broadband

Router and 8080 is the port used for the Web-Mangement interface.

Administrator-

Password-

admin is the Administrator login name

Enter the password and enter again to confirm

User-

Password-

user is the User login name

Enter the password and enter again to confirm

Using the Configuration Menu (continued)

Tools > Time

Time Zone-

Select the Time Zone from the pull-down menu.

Daylight

Saving-

To select Daylight Saving time manually, select enabled or dis-

abled, and enter a start date and an end date for daylight saving

time.

Set the Time-

To manually input the time, enter the values in these fields for

the Year, Month, Day, Hour, Minute, and Second. Click Set Time.

Default

NTP Server-

NTP is short for Network Time Protocol. NTP synchronizes com-

puter clock times in a network of computers.

This field is optional.

Using the Configuration Menu (continued)

Tools > System

The current system settings can be saved as a file onto the local hard drive. The saved

file or any other saved setting file can be loaded back on the Broadband Router. To reload

a system settings file, click on Browse to browse the local hard drive and locate the

system file to be used. You may also reset the Broadband Router back to factory set-

tings by clicking on Restore.

Click Save to save the current settings to the local Hard Drive

Click Browse to find the settings, then click Load

Save Settings to

Local Hard Drive-

Load Settings from

Local Hard Drive-

Restore to Factory

Default Settings-

Click Restore to restore the factory default settings

Browse

Using the Configuration Menu (continued)

Tools > Misc

Ping Test-

Restart

Device-

Block

WAN

Ping-

Discard Ping from

WAN side-

VPN

Pass

Through-

PPTP- select Enabled or Disabled

IPSec- select Enabled or Disabled

The Ping Test is used to

send Ping packets to test if

a computer is on the

Internet. Enter the IP Ad-

dress that you wish to Ping,

and click Ping.

If you choose to block WAN

Ping, the WAN IP Address

of the VDI-624 will not re-

spond to pings. Blocking the

Ping may provide some ex-

tra security from hackers.

The VDI-624 supports VPN (Virtual Private Network) pass-through

for both PPTP (Point-to-Point Tunneling Protocol) and IPSec

(IP Security). Once VPN pass-through is enabled, there is no

need to open up virtual services. Multiple VPN connections can

be made through the VDI-624. This is useful when you have many

VPN clients on the LAN network.

Click Reboot to restart the

VDI-624.

Click Enabled to block the

WAN ping.

UPNP-

Gaming

Mode-

Dynamic

DNS-

To use the Universal Plug and Play feature click on Enabled. UPNP

provides compatibility with networking equipment, software and periph-

erals of the over 400 vendors that cooperate in the Plug and Play forum.

Gaming mode allows a form of pass-through for certain Internet Games.

If you are using Xbox, Playstation2 or a PC, make sure you are using

the latest firmware and Gaming Mode is enabled. To utilize Gaming

Mode, click Enabled. If you are not using a Gaming application, it is

recommended that you Disable Gaming Mode.

Dynamic Domain Name System is a method of keeping a domain name

linked to a changing IP Address. This is a useful feature since many

computers do not use a static IP address.

Using the Configuration Menu (continued)

Status > Device Info

This page displays the current information for the VDI-624. It will display the LAN, WAN

and MAC address information.

If your WAN connection is set up for a Dynamic IP address then a Release button and

a Renew button will be displayed. Use Release to disconnect from your ISP and use

Renew to connect to your ISP.

If your WAN connection is set up for PPPoE, a Connect button and a Disconnect button

will be displayed. Use Disconnect to drop the PPPoE connection and use Connect to

establish the PPPoE connection.

This window will show the VDI-624’s working status:

IP Address: WAN/Public IP Address

Subnet Mask: WAN/Public Subnet Mask

Gateway: WAN/Public Gateway IP Address

Domain Name Server: WAN/Public DNS IP Address

WAN Status: WAN Connection Status

Wireless

IP Address: LAN/Private IP Address of the VDI-624

Subnet Mask: LAN/Private Subnet Mask of the VDI-624

WAN

LAN

MAC Address: Displays the MAC address

SSID: Displays the current SSID

Channel: Displays the current channel

WEP: indicates whether WEP is enabled or disabled

The Broadband Router keeps a running log of events and activities occurring on the

Router. If the device is rebooted, the logs are automatically cleared. You may save the log

files under Log Settings.

Using the Configuration Menu (continued)

Status > Log

View Log-

DI-754

First Page - The first page of the log

Last Page - The last page of the log

Previous - Moves back one log page

Next - Moves forward one log page

Clear - Clears the logs completely

Log Settings - Brings up the page to configure the log

Using the Configuration Menu (continued)

Status > Log > Log Settings

Not only does the Broadband Router display the logs of activities and events, it can be

setup to send these logs to another location.

The address of the SMTP server that will be used to send the

logs.

The email address to which the logs will be sent.

Click on Send Mail Now to send the email.

SMTP Server/

IP Address -

Email Address -

Status > Wireless

Using the Configuration Menu (continued)

Status > Stats

The screen above displays theTraffic Statistics. Here you can view the amount of pack-

ets that pass through the VDI-624 on both the WAN and the LAN ports. The traffic

counter will reset if the device is rebooted.

The wireless client table displays a list of current connected wireless clients. This

table also displays the connection time and MAC address of the connected wireless

client.

Click on Help at any time, for more information.

Using the Network Setup Wizard in Windows XP

In this section you will learn how to establish a network at home or work, using

Microsoft Windows XP.

Note: Please refer to websites such as http://www.homenethelp.com

and http://www.microsoft.com/windows2000 for information about networking

computers using Windows 2000, ME or 98.

Go to Start>Control Panel>Network Connections

Select Set up a home or small office network

Networking Basics

When this screen appears, Click Next.

Please follow all the instructions in this window:

Networking Basics

Click Next.

In the following window, select the best description of your computer. If your computer

connects to the internet through a gateway/router, select the second option as shown.

Click Next.

Enter a Computer description and a Computer name (optional.)

Networking Basics

Click Next.

Enter a Workgroup name. All computers on your network should have the same

Workgroup name.

Click Next.

Please wait while the Network Setup Wizard applies the changes.

Networking Basics

When the changes are complete, click Next.

Please wait while the Network Setup Wizard configures the computer.

This may take a few minutes.

Networking Basics

In the window below, select the option that fits your needs. In this example, Create a

Network Setup Disk has been selected. You will run this disk on each of the

computers on your network. Click Next.

Insert a disk into the Floppy Disk Drive, in this case drive A.

Click Next.

Networking Basics

Please read the information under Here’s how in the screen below. After you complete

the Network Setup Wizard you will use the Network Setup Disk to run the Network

Setup Wizard once on each of the computers on your network. To continue click Next.

Networking Basics

Please read the information on this screen, then click Finish to complete the

Network Setup Wizard.

The new settings will take effect when you restart the computer. Click Yes to restart

the computer.

You have completed configuring this computer. Next, you will need to run the Network

Setup Disk on all the other computers on your network. After running the Network

Setup Disk on all your computers, your new wireless network will be ready to use.



Networking Basics

Naming your Computer

To name your computer, please follow these directions:In Windows XP:

Click Start (in the lower left corner of the screen)

Right-click on My Computer

Select Properties and click



Select the Computer

Name Tab in the System

Properties window.

You may enter a

Computer Description if

you wish; this field is

optional.

To rename the computer

and join a domain, Click

Change.

Networking Basics

Naming your Computer



In this window, enter the

Computer name

Select Workgroup and enter

the name of the Workgroup.

All computers on your network

must have the same

Workgroup name.

Click OK



Checking the IP Address in Windows XP

The wireless adapter-equipped computers in your network must be in the same IP Ad-

dress range (see Getting Started in this manual for a definition of IP Address Range.) To

check on the IP Address of the adapter, please do the following:

Right-click on the

Local Area

Connection icon

in the task bar.

Click on Status.



Networking Basics

Checking the IP Address in Windows XP

This window will appear.

Click the

Support tab

Click Close



Assigning a Static IP Address in Windows XP/2000

Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses

to the computers on the network, using DHCP (Dynamic Host Configuration Protocol)

technology. If you are using a DHCP-capable Gateway/Router you will not need to assign

Static IP Addresses.

If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IP

Address, please follow these instructions:



Go to Start

Double-click on

Control Panel

Networking Basics

Assigning a Static IP Address in Windows XP/2000



Double-click on

Network

Connections



Double-click on

Properties

Right-click on Local Area

Connections

Input your IP address and

subnet mask. (The IP

Addresses on your network

must be within the same

range. For example, if one

computer has an IP Address

of 192.168.0.2, the other

computers should have IP

Addresses that are

sequential, like 192.168.0.3

and 192.168.0.4. The subnet

mask must be the same for

all the computers on the

network.)

Networking Basics

Assigning a Static IP Address

in Windows XP/2000

Input your DNS server

addresses. (Note: If you

are entering a DNS

server, you must enter the

IP Address of the Default

Gateway.)



The DNS server information will be supplied

by your ISP (Internet Service Provider.)



Click OK

Click on Internet Protocol

(TCP/IP)

Click Properties



Networking Basics

Assigning a Static IP Address with Macintosh OSX



Go to the Apple Menu and se-

lect System Preferences

cClick on Network

Select Built-in Ethernet in the

Show pull-down menu

Select Manually in the Con-

figure pull-down menu

Input the Static IP Address,

the Subnet Mask and the

Router IP Address in the ap-

propriate fields

Click Apply Now

Networking Basics

Selecting a Dynamic IP Address with Macintosh OSX

Go to the Apple Menu and select

System Preferences

Click on Network

Select Built-in Ethernet in the

Show pull-down menu

Select Using DHCP in the

Configure pull-down menu

Click Apply Now

The IP Address, Subnet

mask, and the Router’s IP

Address will appear in a few

seconds



Networking Basics

Checking the Wireless Connection by Pinging in Windows XP and

2000

Checking the Wireless Connection by Pinging in Windows Me

and 98

Go to Start > Run >

type cmd. A window

similar to this one

will appear. Type

ping

xxx.xxx.xxx.xxx,

where xxx is the IP

Address of the

Wireless Router or

Access Point. A

good wireless

connection will show

four replies from the

Wireless Router or

Acess Point, as

shown.

Go to Start > Run

> type command.

A window similar to

this will appear.

Type ping

xxx.xxx.xxx.xxx

where xxx is the IP

Address of the

Wireless Router or

Access Point. A

good wireless

connection will

show four replies

from the wireless

router or access

point, as shown.



Troubleshooting

This Chapter provides solutions to problems that can occur during the installation and

operation of the VDI-624 Wireless Broadband Router. We cover various aspects of the

network setup, including the network adapters. Please read the following if you are having

problems.

Note: If you have

changed the default IP

Address, make sure to

ping the correct IP

Address assigned to the

VDI-624.



1.The computer used to configure the VDI-624 cannot access the

Configuration menu.

Check that the Ethernet LED on the VDI-624 is ON. If the LED is not

ON, check that the cable for the Ethernet connection is securely

inserted.

Check that the Ethernet Adapter is working properly. Please see

item 3 (Check that the drivers for the network adapters are

installed properly) in this Troubleshooting section to check that

the drivers are loaded properly.

Check that the IP Address is in the same range and subnet as the

VDI-624. Please see Checking the IP Address in Windows XP in

the Networking Basics section of this manual.

Note: The IP Address of the VDI-624 is 192.168.0.1. All the computers on the

network must have a unique IP Address in the same range, e.g., 192.168.0.x.

Any computers that have identical IP Addresses will not be visible on the

network. They must all have the same subnet mask, e.g., 255.255.255.0

Do a Ping test to make sure that the VDI-624 is responding. Go to

Start>Run>Type Command>Type ping 192.168.0.1. A successful

ping will show four replies.



It is recommended that you use an Ethernet Connection to configure the VDI-624

Wireless Broad Band Router.

2. The wireless client cannot access the Internet in the

Infrastructure mode.

Make sure the wireless client is associated and joined with the correct Access

Point. To check this connection: Right-click on the Local Area Connection icon

in the taskbar> select View Available Wireless Networks. The Connect to

Wireless Network screen will appear. Please make sure you have selected the

correct available network, as shown in the illustrations below.

Troubleshooting

Check that the IP Address assigned to the wireless adapter is within the

same IP Address range as the access point and gateway. (Since the

VDI-624 has an IP Address of 192.168.0.1, wireless adapters must have

an IP Address in the same range, e.g., 192.168.0.x. Each device must

have a unique IP Address; no two devices may have the same IP

Address. The subnet mask must be the same for all the computers on

the network.) To check the IP Address assigned to the wireless adapter,

double-click on the Local Area Connection icon in the taskbar >

select the Support tab and the IP Address will be displayed. (Please

refer to Checking the IP Address in the Networking Basics section of

this manual.)

If it is necessary to assign a Static IP Address to the wireless adapter,

please refer to the appropriate section in Networking Basics. If you are

entering a DNS Server address you must also enter the Default

Gateway Address. (Remember that if you have a DHCP-capable router,

you will not need to assign a Static IP Address. See Networking

Basics: Assigning a Static IP Address.)

default



Troubleshooting

3. Check that the drivers for the network adapters are

installed properly.

You may be using different network adapters than those illustrated here, but this

procedure will remain the same, regardless of the type of network adapters you are

using.

Click Device

Manager



Select the

Hardware

Tab



Go to Start > My

Computer >

Properties

Troubleshooting



Double-click

on Network

Adapters

Right-click on D-Link

AirPlus VDWL-G650

Wireless Cardbus

Adapter (In this example

we use the VDWL-G650;

you may be using other

network adapters, but the

procedure will remain the

same.)

Select Properties

to check that the

drivers are in-

stalled properly

Look under Device

Status to check that the

device is working

properly

Click OK

D-Link AirPlus DWL-G650

D-Link AirPlus DWL-G650 Wireless Cardbus Adapter

Troubleshooting

4. What variables may cause my wireless products

to lose reception?

D-Link products let you access your network from virtually anywhere you want. However,

the positioning of the products within your environment will affect the wireless range.

Please refer to Installation Considerations in the Wireless Basics section of this manual

for further information about the most advantageous placement of your D-Link wireless

products.

5. Why does my wireless connection keep dropping?

6. Why can’t I get a wireless connection?

If you have enabled Encryption on the VDI-624, you must also enable encryption on all

wireless clients in order to establish a wireless connection.

Make sure that the SSID on the Router and the Wireless Client are exactly the

same. If they are not, wireless connection will not be established.

For 802.11g, the Encryption settings are: 64 or 128 bit. Make sure that the

encryption bit level is the same on the Router and the Wireless Client.



Move the VDI-624 and the wireless client into the same room and then test the

wireless connection.



Disable all security settings. (WEP, MAC Address Control)



Antenna Orientation- Try different antenna orientations for the VDI-624. Try to

keep the antenna at least 6 inches away from the wall or other objects.



If you are using 2.4GHz cordless phones, X-10 equipment or other home secu-

rity systems, ceiling fans, and lights, your wireless connection will degrade dra-

matically or drop altogether. Try changing the Channel on your Router, Access

Point and Wireless adapter to a different Channel to avoid interference.



Keep your product away (at least 3-6 feet) from electrical devices that generate

RF noise, like microwaves, monitors, electric motors, etc.



Troubleshooting

6. Why can’t I get a wireless connection? (continued)

Turn off your VDI-624 and the client. Turn the VDI-624 back on again, and then

turn on the client.



Check that the LED indicators are indicating normal activity. If not, check that the

AC power and Ethernet cables are firmly connected.



Make sure that all devices are set to Infrastructure mode.



Check that the IP Address, subnet mask, gateway and DNS settings are cor-

rectly entered for the network.



If you are using 2.4GHz cordless phones, X-10 equipment or other home security

systems, ceiling fans, and lights, your wireless connection will degrade dramati-

cally or drop altogether. Try changing the Channel on your VDI-624, and on all the

devices in your network to avoid interference.



Keep your product away (at least 3-6 feet) from electrical devices that generate

RF noise, like microwaves, monitors, electric motors, etc.



7. I forgot my encryption key.

Reset the VDI-624 to its factory default settings and restore the other devices on

your network to their default settings. You may do this by pressing the Reset

button on the back of the unit. You will lose the current configuration settings.



8. Resetting the VDI-624 to Factory Default Settings

After you have tried other methods for troubleshooting your network, you may

choose to Reset the VDI-624 to the factory default settings. Remember that D-

Link AirPro products network together, out of the box, at the factory default

settings.

To hard-reset the VDI-624 to Factory Default Settings, please do the following:

Troubleshooting



After the VDI-624 reboots (this may take a few minutes)

it will be reset to the factory Default settings

Use a paper clip to press the Reset button

Hold for about 10 seconds and then release

Locate the Reset button on the back of the VDI-624

Reset

IP Filtering

URL Filtering

Domain Blocking

Scheduling

IEEE 802.11b

IEEE 802.3

IEEE 802.3u

Technical Specifications

L2TP



Standards

VPN Pass Through/ Multi-Sessions

PPTP

Device Management

Web-Based- Internet Explorer v6 or later; Netscape Navigator v6

or later; or other Java-enabled browsers

Advanced Firewall Features

NAT with VPN Passthrough (Network Address Translation)



95% maximum (non-condensing)

Wireless Operating Range

Operating Temperature

32ºF to 131ºF (0ºC to 55ºC)



Humidity:



Indoors – up to 328 feet (100 meters)



IPSec



DHCP Server and Client



MAC Filtering



Outdoors – up to 1312 feet (400 meters)

Safety and Emissions:

FCC



IEEE 802.11g

2.4GHz to 2.462GHz



Wireless Frequency Range:

LEDs:

Power

WAN

Physical Dimensions:

Technical Specifications



L = 7.56 inches (192mm)

W = 4.65 inches (118mm)

H = 1.22 inches (31mm)



Wireless Transmit Power:

15dBm ± 2dB



Security:

802.1x

WPA- WiFi Protected Access

(64-,128-WEP with TKIP, MIC, IV Expansion, Shared Key

Authentication)



External Antenna Type:

Single detachable reverse SMA



Orthogonal Frequency Division Multiplexing (OFDM)

Modulation Technology:



Power Input:

Ext. Power Supply DC 5V, 2.5A

Weight:

10.8 oz. (0.3kg)



LAN (10/100)

WLAN (Wireless Connection)



108 Mbps

54 Mbps

48 Mbps

36 Mbps

24 Mbps

18 Mbps

12 Mbps

11 Mbps

9 Mbps

6 Mbps

5.5 Mbps

2 Mbps

1 Mbps

Wireless Data Rates with Automatic Fallback:



108Mbps

54Mbps OFDM, 10% PER, -68dBm

48Mbps OFDM, 10% PER, -68dBm

36Mbps OFDM, 10% PER, -75dBm



Receiver Sensitivity:

24Mbps OFDM, 10% PER, -79dBm

18Mbps OFDM, 10% PER, -82dBm

12Mbps OFDM, 10% PER, -84dBm



11Mbps CCK, 8% PER, -82dBm

9Mbps OFDM, 10% PER, -87dBm

6Mbps OFDM, 10% PER, -88dBm

5.5Mbps CCK, 8% PER, -85dBm

2Mbps QPSK, 8% PER, -86dBm

1Mbps BPSK, 8% PER, -89dBm



Technical Specifications



Frequently Asked Questions

When entering the IP Address of the VDI-624 (192.168.0.1), you are not connecting

to the Internet or have to be connected to the Internet. The device has the utility built-

in to a ROM chip in the device itself. Your computer must be on the same IP subnet

to connect to the web-based utility.

To resolve difficulties accessing a web utility, please follow the steps below.

SteSte

Ste

p 1p 1

p 1

Verify physical connectivity by checking for solid link lights on the device. If

you do not get a solid link light, try using a different cable or connect to a different

port on the device if possible. If the computer is turned off, the link light may not be

on.

The following connections require a Crossover Cable:

Computer to Computer

Computer to Uplink Port

Computer to Access Point

Computer to Print Server

Computer/XBOX/PS2 to DWL-810

Computer/XBOX/PS2 to DWL-900AP+

Uplink Port to Uplink Port (hub/switch)

Normal Port to Normal Port (hub/switch)

The following connections require a Straight-through Cable:

Computer to Residential Gateway/Router

Computer to Normal Port (hub/switch)

Access Point to Normal Port (hub/switch)

Print Server to Normal Port (hub/switch)

Uplink Port to Normal Port (hub/switch)

Rule of Thumb:

”If there is a link light, the cable is right.”

What type of cable should I be using?

Why can´t I access the web based configuration?

Frequently Asked Questions (continued)

What type of cable should I be using? (continued)

What´s the difference between a crossover cable and a straight-through

cable?

The wiring in crossover and straight-through cables are different. The two types

of cable have different purposes for different

LAN configurations. EIA/TIA 568A/568B

define the wiring standards and allow for

two different wiring color codes as

illustrated in the following diagram.

*The wires with colored backgrounds may

have white stripes and may be denoted

that way in diagrams found elsewhere.

How to tell straight-through cable from

a crossover cable:

The main way to tell the difference

between the two cable types is to compare

the wiring order on the ends of the cable. If

the wiring is the same on both sides, it is

straight-through cable. If one side has opposite wiring, it is a crossover cable.

All you need to remember to properly configure the cables is the pinout order of

the two cable ends and the following rules:

A straight-through cable has identical ends

A crossover cable has different ends

It makes no functional difference which standard you follow for straight-through

cable ends, as long as both ends are the same. You can start a crossover cable

with either standard as long as the other end is the other standard. It makes no

functional difference which end is which. The order in which you pin the cable is

important. Using a pattern other than what is specified in the above diagram

could cause connection problems.

When to use a crossover cable and when to use a straight-through cable:

Computer to Computer – Crossover

Computer to an normal port on a Hub/Switch – Straight-through

Computer to an uplink port on a Hub/Switch - Crossover

Hub/Switch uplink port to another Hub/Switch uplink port – Crossover

Hub/Switch uplink port to another Hub/Switch normal port - Straight-through

Why can´t I access the web based configuration? (continued)

Step 3Step 3

Step 3 Configure your Internet settings.

SteSte

Ste

p 2p 2

p 2 Disable any Internet security software running on the computer. Software

firewalls like Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, etc. might

block access to the configuration pages. Check the help files included with your

firewall software for more information on disabling or configuring it.

Frequently Asked Questions (continued)

Click the Connection tab and set the dial-up

option to Never Dial a Connection. Click

the LAN Settings button.

Nothing should be checked. Click OK.

Go to the Advanced tab and click the

button to restore these settings to their

defaults.

Click OK. Go to the desktop and close any open

windows.

Go to Start>Settings>Control Panel. Double click

the Internet Options Icon. From the Security tab,

click the button to restore the settings to their

defaults.

Why can´t I access the web based configuration? (continued)

Frequently Asked Questions (continued)

SteSte

Ste

p 4p 4

p 4

Check your IP Address. Your computer must have an IP Address in the

same range of the device you are attempting to configure. Most D-Link devices use

the 192.168.0.X range.

How can I find my IP Address in Windows 95, 98, or

ME?

Step 1 Click on Start, then click on Run.

Step 2 The Run Dialogue Box will appear. Type winipcfg in the window as shown

then click OK.

Step 3 The IP Configuration window will appear, displaying your Ethernet

Adapter Information.

 Select your adapter from the drop down menu.

 If you do not see your adapter in the drop down menu, your adapter is

not properly installed.

Step 4 After selecting your adapter, it will display your IP Address, subnet

mask, and default gateway.

Step 5 Click OK to close the IP Configuration window.

Why can´t I access the web based configuration? (continued)

Frequently Asked Questions (continued)

SteSte

Ste

p 4p 4

p 4 (continued) Check your IP Address. Your computer must have an IP Address

in the same range of the device you are attempting to configure. Most D-Link devices

use the 192.168.0.X range.

How can I find my IP Address in Windows 2000/XP?

Step 1 Click on Start and select Run.

Step 2 Type cmd then click OK.

Step 3 From the Command Prompt, enter ipconfig. It will return your IP

Address, subnet mask, and default gateway

Step 4 Type exit to close the command prompt.

Why can´t I access the web based configuration? (continued)

Frequently Asked Questions (continued)

SteSte

Ste

p 4p 4

p 4 (continued) Check your IP Address. Your computer must have an IP

Address in the same range of the device you are attempting to configure. Most D-Link

devices use the 192.168.0.X range.

Make sure you take note of your computer´s Default Gateway IP Address. The Default

Gateway is the IP Address of the D-Link router. By default, it should be 192.168.0.1.

How can I assign a Static IP Address in Windows XP?

Step 1

Click on Start > Control Panel > Network and Internet Connections >

Network connections.

Step 2 See Step 2 for Windows 2000 and continue from there.

How can I assign a Static IP Address in Windows 2000?

Step 1 Right-click on My Network

Places and select Properties.

Step 2 Right-click on the Local

Area Connection which represents

your network card and select

Properties.

Highlight Internet Protocol (TCP/

IP) and click Properties.

Why can´t I access the web based configuration? (continued)

Frequently Asked Questions (continued)

How can I assign a Static IP Address in Windows 2000?

(continued)

Click Use the following IP Address and

enter an IP Address that is on the same

subnet as the LAN IP Address on your

router.

Example: If the router´s LAN IP

Address is 192.168.0.1, make your IP

Address 192.168.0.X where X = 2-99.

Make sure that the number you choose is

not in use on the network.

Set the Default Gateway to be the

same as the LAN IP Address of your

router (192.168.0.1).

Set the Primary DNS to be the same as

the LAN IP address of your router

(192.168.0.1).

The Secondary DNS is not needed or enter a DNS server from your ISP.

Click OK twice. You may be asked if you want to reboot your computer. Click

Yes.

How can I assign a Static IP

Address in Windows 98/Me?

Step 1 From the desktop, right-click on the

Network Neigborhood icon (Win ME - My

Network Places) and select Properties.

Highlight TCP/IP and click the Properties

button. If you have more than 1 adapter,

then there will be a TCP/IP “Binding” for

each adapter. Highlight TCP/IP > (your

network adapter) and then click

Properties.

Why can´t I access the web based configuration? (continued)

Frequently Asked Questions (continued)

How can I assign a Static IP Address in Windows

98/Me? (continued)

Step 2 Click Specify an IP Address.

Step 3 Click on the Gateway tab.

Enter the LAN IP Address of your router

here (192.168.0.1).

Click Add when finished.

Step 4 Click on the DNS Configuration tab.

Enter in an IP Address that is on the same

subnet as the LAN IP Address on your router.

Example: If the router´s LAN IP Address is

192.168.0.1, make your IP Address

192.168.0.X where X is between 2-99. Make

sure that the number you choose is not in

use on the network.

Step 5 Click OK twice.

Click Enable DNS. Type in a Host (can be

any word). Under DNS server search order,

enter the LAN IP Address of your router

(192.168.0.1). Click Add.

When prompted to reboot your computer,

click Yes.

After you reboot, the computer will now have

a static, private IP Address.

Why can´t I access the web based configuration? (continued)

SteSte

Ste

p 5p 5

p 5 Access the web management. Open your web

browser and enter the IP Address of your D-Link device in

the address bar. This should open the login page for the web

management. Follow instructions to login and complete the configuration.

Frequently Asked Questions (continued)

How do I open ports on my router?

To allow traffic from the internet to enter your local network, you will need to open up

ports or the router will block the request.

Step 1 Open your web browser

and enter the IP Address of

your D-Link router

(192.168.0.1). Enter username

(admin) and your password

(blank by default).

Step 2 Click on the Advanced

on top and then click Virtual

Server on the left side.

Step 3 Check Enabled to

activate entry.

Step 4 Enter a name for your virtual server entry.

Step 5 Next to Private IP, enter the IP Address of the computer on your local

network that you want to allow the incoming service to.

Step 6 Choose Protocol Type - either TCP, UDP, or both. If you are not sure, select

both.

Step 7 Enter the port information next to Private Port and Public Port. The private

and public ports are usually the same. The public port is the port seen from the WAN

side, and the private port is the port being used by the application on the computer

within your local network.

Step 8 Enter the Schedule information.

Step 9 Click Apply and then click Continue.

Note: Make sure DMZ host is disabled. If DMZ is enabled, it will disable all Virtual

Server entries.

Because our routers use NAT (Network Address Translation), you can only open a

specific port to one computer at a time. For example: If you have 2 web servers on

your network, you cannot open port 80 to both computers. You will need to configure

1 of the web servers to use port 81. Now you can open port 80 to the first computer

and then open port 81 to the other computer.

Frequently Asked Questions (continued)

What is DMZ?

Demilitarized Zone:

In computer networks, a DMZ (demilitarized zone) is a computer host or small

network inserted as a neutral zone between a company´s private network and the

outside public network. It prevents outside users from getting direct access to a

server that has company data. (The term comes from the geographic buffer zone that

was set up between North Korea and South Korea following the UN police action in

the early 1950s.) A DMZ is an optional and more secure approach to a firewall and

effectively acts as a proxy server as well.

In a typical DMZ configuration for a small company, a separate computer (or host in

network terms) receives requests from users within the private network for access to

Web sites or other companies accessible on the public network. The DMZ host then

initiates sessions for these requests on the public network. However, the DMZ host is

not able to initiate a session back into the private network. It can only forward packets

that have already been requested.

Users of the public network outside the company can access only the DMZ host. The

DMZ may typically also have the company´s Web pages so these could be served to

the outside world. However, the DMZ provides access to no other company data. In

the event that an outside user penetrated the DMZ hosts security, the Web pages

might be corrupted but no other company information would be exposed. D-Link, a

leading maker of routers, is one company that sells products designed for setting up

a DMZ.

How do I configure the DMZ Host?

The DMZ feature allows you to forward all incoming ports to one computer on the local

network. The DMZ, or Demilitarized Zone, will allow the specified computer to be

exposed to the Internet. DMZ is useful when a certain application or game does not

work through the firewall. The computer that is configured for DMZ will be completely

vulnerable on the Internet, so it is suggested that you try opening ports from the

Virtual Server or Firewall settings before using DMZ.

Step 1 Find the IP address of the computer you want to use as the DMZ host.

To find out how to locate the IP Address of the computer in Windows XP/2000/ME/9x

or Macintosh operating systems please refer to Step 4 of the first question in this

section (Frequently Asked Questions).

Frequently Asked Questions (continued)

Step 2 Log into the web based configuration

of the router by typing in the IP Address of the

router (default:192.168.0.1) in your web

browser. The username is admin (all

lowercase) and the password is password

(all lowercase)

How do I configure the DMZ Host? (continued)

Step 3 Click the Advanced tab and then click on the DMZ button. Select Enable

and type in the IP Address you found in step 1.

Step 4 Click Apply

and then Continue to

save the changes.

Note: When DMZ is

enabled, Virtual Server

settings will still be

effective. Remember,

you cannot forward the

same port to multiple

IP Addresses, so the

Virtual Server settings

will take priority over

DMZ settings.

DI-624

admin

Frequently Asked Questions (continued)

How do I open a range of ports on my VDI-624 using Firewall rules?

Step 1 Access the router’s web configuration by entering the router’s IP Address in

your web browser. The default IP Address is 192.168.0.1. Login using your password.

The default username is “admin” and the password is blank.

If you are having difficulty accessing web management, please see the first question

in this section.

Step 2 From the web management Home page, click the Advanced tab then click

the Firewall button.

Step 3 Click on

Enabled and type in

a name for the new

rule.

Step 4 Choose WAN

as the Source and

enter a range of IP

Addresses out on the

internet that you

would like this rule

applied to. If you

would like this rule to

allow all internet

users to be able to

access these ports,

then put an Asterisk

in the first box and

leave the second box

empty.

Step 5 Select LAN as the Destination and enter the IP Address of the computer on

your local network that you want to allow the incoming service to. This will not work

with a range of IP Addresses.

Step 6 Enter the port or range of ports that are required to be open for the incoming

service.

Step 7 Click Apply and then click Continue.

Because our routers use NAT (Network Address Translation), you can only open a

specific port to one computer at a time. For example: If you have 2 web servers on

your network, you cannot open port 80 to both computers. You will need to configure

1 of the web servers to use port 81. Now you can open port 80 to the first computer

and then open port 81 to the other computer.

Note: Make sure DMZ host is disabled.

Frequently Asked Questions (continued)

What are virtual servers?

A Virtual Server is defined as a service port, and all requests to this port will be

redirected to the computer specified by the server IP. For example, if you have an FTP

Server (port 21) at 192.168.0.5, a Web server (port 80) at 192.168.0.6, and a VPN

server at 192.168.0.7, then you need to specify the following virtual server mapping

table:

Server Port

Server IP

Enable

21 192.168.0.5 X

80 192.168.0.6 X

1723 192.168.0.7 X

How do I use PC Anywhere with my VDI-624 router?

You will need to open 3 ports in the Virtual Server section of your D-Link router.

Step 1 Open your web browser and enter the IP Address of the router (192.168.0.1).

Step 2 Click on Advanced at the top and then click Virtual Server on the left side.

Step 3 Enter the

information as seen

below. The Private IP

is the IP Address of the

computer on your local

network that you want to

connect to.

Step 4 The first entry

will read as shown here:

Step 5 Click Apply

and then click Continue.

How do I use PC Anywhere with my VDI-624 router? (continued)

Frequently Asked Questions (continued)

Step 6 Create

a second entry

as shown here:

Step 7 Click

Apply and then

click Continue.

Step 8 Create

a third and final

entry as shown

here:

Step 9 Click Apply and then click Continue.

Step 10 Run PCAnywhere from the remote site and use the WAN IP Address of the

router, not your computer´s IP Address.

How can I use eDonkey behind my D-Link Router?

Frequently Asked Questions (continued)

You must open ports on your router to allow incoming traffic while using eDonkey.

eDonkey uses three ports (4 if using CLI):

4661 (TCP) To connect with a server

4662 (TCP) To connect with other clients

4665 (UDP) To communicate with servers other than the one you are connected to.

4663 (TCP) *Used with the command line (CLI) client when it is configured to allow

remote connections. This is the case when using a Graphical Interface (such as the

Java Interface) with the client.

Step 1 Open your web browser and enter the IP Address of your router

(192.168.0.1). Enter username (admin) and your password (leave blank).

Step 2 Click on Advanced and then click Firewall.

Step 3 Create a

new firewall rule:

Click Enabled.

Enter a name

(edonkey).

Click Allow.

Next to Source,

select WAN

under interface. In

the first box,

enter an *. Leave

the second box

empty.

Next to

Destination,

select LAN under

interface. Enter

the IP Address of

the computer you

are running

eDonkey from.

Leave the second

box empty. Under Protocol, select *. In the port range boxes, enter 4661 in the first

box and then 4665 in the second box. Click Always or set a schedule.

Step 4 Click Apply and then Continue.

Frequently Asked Questions (continued)

To allow you to play SOCOM and hear audio, you must download the latest firmware

for the router (if needed), enable Game Mode, and open port 6869 to the IP Address of

your Playstation.

Step 1 Upgrade firmware (follow link above).

Step 2 Open your web browser and enter the IP Address of the router (192.168.0.1).

Enter username (admin) and your password (blank by default).

Step 3 Click on the Advanced tab and then click on Virtual Server on the left side.

Step 4 You will now create a new Virtual Server entry. Click Enabled and enter a

name (socom). Enter the IP Address of your Playstation for Private IP.

Step 5 For Protocol Type select Both. Enter 6869 for both the Private Port and

Public Port. Click Always. Click Apply to save changes and then Continue.

Step 6 Click on the Tools tab and then Misc on the left side.

Step 7 Make sure Gaming Mode is Enabled. If not, click Enabled. Click Apply

and then Continue.

socom

192.168.0.100

Both

6869

How do I set up my router for SOCOM on my Playstation 2?

Frequently Asked Questions (continued)

How can I use Gamespy behind my D-Link router?

Step 1 Open your web browser and enter the IP Address of the router (192.168.0.1).

Enter admin for the username and your password (blank by default).

Step 2 Click on the Advanced tab and then click Virtual Server on the left side.

Step 3 You will create 2 entries.

Step 4 Click Enabled and enter

Settings:

Click Apply and then continue.

Step 5 Enter 2nd entry:

Click Enabled

Click Apply and then continue.

Both

192.168.0.100

gamespy1

3783

192.168.0.100

gamespy2

6500

Both

NAME - Gamespy1

PRIVATE IP - The IP

Address of your computer

that you are running

Gamespy from.

PROTOCOL TYPE - Both

PRIVATE PORT - 3783

PUBLIC PORT - 3783

SCHEDULE - Always.

NAME - Gamespy2

PRIVATE IP - The IP

Address of your computer

that youare running

Gamespy from.

PROTOCOL TYPE - Both

PRIVATE PORT - 6500

PUBLIC PORT - 6500

SCHEDULE - Always.

Frequently Asked Questions (continued)

How do I configure my router for KaZaA and Grokster?

The following is for KaZaA, Grokster, and others using the FastTrack P2P file sharing

system.

In most cases, you do not have to configure anything on the router or on the KazaA

software. If you are having problems, please follow steps below:

Step 1 Enter the IP Address of your router in a web browser (192.168.0.1).

Step 2 Enter your username (admin) and your password (blank by default).

Step 3 Click on Advanced and then click Virtual Server.

Step 4 Click Enabled and then enter a Name (KaZaA for example).

Step 5 Enter the IP Address of the computer you are running KaZaA from in the

Private IP box. Select TCP for the Protocol Type.

Step 6 Enter 1214 in the Private and Public Port boxes. Click Always under

schedule or set a time range. Click Apply.

Make sure that you did not enable proxy/firewall in the KaZaA software.

Frequently Asked Questions (continued)

How do I configure my router to play Warcraft 3?

You must open ports on your router to allow incoming traffic while hosting a game in

Warcraft 3. To play a game, you do not have to configure your router.

Warcraft 3 (Battlenet) uses port 6112.

For the VDI-624

Step 1 Open your web browser

and enter the IP Address of your

router (192.168.0.1). Enter

username (admin) and your

password (leave blank).

Step 2 Click on Advanced and

then click Virtual Server.

Step 3 Create a new entry: Click

Enabled. Enter a name

(warcraft3). Private IP - Enter the

IP Address of the computer you

want to host the game. Select

Both for Protocol Type Enter 6112

for both Private Port and Public Port Click Always or set a schedule.

Step 4 Click Apply and then Continue.

Note: If you want multiple computers from you LAN to play in the same game that

you are hosting, then repeat the steps above and enter the IP Addresses of the other

computers. You will need to change ports. Computer #2 can use port 6113, computer

#3 can use 6114, and so on.

You will need to change the port information within the Warcraft 3 software for

computers #2 and up.

Configure the Game Port information on each computer:

Start Warcraft 3 on each computer, click Options > Gameplay. Scroll down and you

should see Game Port. Enter the port number as you entered in the above steps.

192.168.0.100

warcraft3

6112

both

Frequently Asked Questions (continued)

How do I use NetMeeting with my D-Link Router?

Unlike most TCP/IP applications, NetMeeting uses DYNAMIC PORTS instead of

STATIC PORTS. That means that each NetMeeting connection is somewhat different

than the last. For instance, the HTTP web site application uses port 80. NetMeeting

can use any of over 60,000 different ports.

All broadband routers using (only) standard NAT and all internet sharing programs like

Microsoft ICS that use (only) standard NAT will NOT work with NetMeeting or other

H.323 software packages.

The solution is to put the router in DMZ.

Note: A few hardware manufacturers have taken it on themselves to actually provide

H.323 compatibility. This is not an easy task since the router must search each

incoming packet for signs that it might be a netmeeting packet. This is a whole lot

more work than a router normally does and may actually be a weak point in the

firewall. D-Link is not one of the manufacturers.

To read more on this visit http://www.HomenetHelp.com

How do I set up my router to use iChat? -for Macintosh users-

You must open ports on your router to allow incoming traffic while using iChat.

iChat uses the following ports: 5060 (UDP) 5190 (TCP) File Sharing 16384-16403

(UDP) To video conference with other clients.

Step 1 Open your web browser and enter the IP Address of your router

(192.168.0.1). Enter username (admin) and your password (leave blank).

Step 2 Click on Advanced and then click Firewall.

Frequently Asked Questions (continued)

Step 3 Create a new

firewall rule:

Leave the second box empty. Under Protocol, select UDP. In the port range boxes,

enter 5060 in the first box and leave the second box empty.

Click Always or set a schedule.

Step 4 Click Apply

and then Continue.

Step 5

Repeat steps 3 and 4

enter ichat2 and

open ports 16384-

16403 (UDP).

How do I set up my router to use iChat? -for Macintosh users-

(continued)

Click Enabled.

Enter a name

(ichat1).

Click Allow.

Next to Source,

select WAN under

interface.

In the first box,

enter an *.

Leave the second

box empty.

Next to

Destination,

select LAN under

interface.

Enter the IP

Address of the

computer you are running iChat from.

Frequently Asked Questions (continued)

If using Mac OS X Firewall, you may need to temporarily turn off the firewall in

the Sharing preference pane on both computers.

To use the Mac OS X Firewall, you must open the same ports as in the router:

Step 1 Choose Apple menu > System Preferences.

Step 2 Choose View > Sharing.

Step 3 Click the Firewall tab.

Step 4 Click New.

Step 5 Choose Other from the Port Name pop-up menu.

Step 6 In the Port Number, Range or Series field, type in: 5060, 16384-16403.

Step 7 In the Description field type in: iChat AV.

Step 8 Click OK.

For File Sharing:

Step 1 Click on

Advanced and then

Virtual Server.

Step 2 Check Enabled

to activate entry.

Step 3 Enter a name for

your virtual server entry

(ichat3).

Step 4 Next to Private

IP, enter the IP Address

of the computer on your

local network that you

want to allow the

incoming service to.

Step 5 Select TCP for

Protocol Type.

Step 6 Enter 5190 next to Private Port and Public Port.

Stsp 7 Click Always or configure a schedule.

Step 8 Click Apply and then Continue.

How do I set up my router to use iChat? -for Macintosh users-

(continued)

Frequently Asked Questions (continued)

How do I send or receive a file via iChat when the Mac OSX firewall

is active? -for Macintosh users- Mac OS X 10.2 and later

“iChat cannot send or receive a file when the Mac OS X firewall is active in its default

state. If you have opened the AIM port, you may be able to receive a file but not send

them.

In its default state, the Mac OS X firewall blocks file transfers using iChat or America

Online AIM software. If either the sender or receiver has turned on the Mac OS X firewall,

the transfer may be blocked.

The simplest workaround is to temporarily turn off the firewall in the Sharing preference

pane on both computers. This is required for the sender. However, the receiver may keep

the firewall on if the AIM port is open. To open the AIM port:

If you do not want to turn off the firewall at the sending computer, a different file sharing

service may be used instead of iChat. The types of file sharing available in Mac OS X are

outlined in technical document 106461, "Mac OS X: File Sharing" in the AppleCare Knowl-

edge base online.

Note: If you use a file sharing service when the firewall is turned on, be sure to click the

Firewall tab and select the service you have chosen in the "Allow" list. If you do not do

this, the firewall will also block the file sharing service. “

The following information is from the online Macintosh AppleCare knowledge base:

Step 1 Choose Apple menu > System Preferences.

Step 2 Choose View > Sharing.

Step 3 Click the Firewall tab.

Step 4 Click New.

Step 5 Choose AOL IM from the Port Name pop-up menu. The number 5190

should already be filled in for you.

Step 6 Click OK.

What is NAT?

NAT stands for Network Address Translator. It is proposed and described in RFC-

1631 and is used for solving the IP Address depletion problem. Basically, each NAT

box has a table consisting of pairs of local IP Addresses and globally unique

addresses, by which the box can “translate” the local IP Addresses to global address

and vice versa. Simply put, it is a method of connecting multiple computers to the

Internet (or any other IP network) using one IP Address.

D-Link´s broadband routers (ie: DI-604) support NAT. With proper configuration,

multiple users can access the Internet using a single account via the NAT device.

For more information on RFC-1631: The IP Network Address Translator (NAT), visit

http://www.faqs.org/rfcs/rfc1631.html

Frequently Asked Questions (continued)

Warranty

(USA only)

Subject to the terms and conditions set forth herein, GTE.Net LLC d/b/a Verizon Internet

Solutions and Verizon Internet Services Inc. (collectively “Verizon Online”) provide this Limited

Warranty for the products you are obtaining through Verizon Online (“Product(s)”). This

Limited Warranty is provided only to the person or entity (“Customer”) that originally purchased

the Product(s) from:

•Verizon Online and for

• Products purchased and delivered within the fifty states of the United States and the

District of Columbia Limited Warranty: Verizon Online warrants that the hardware portion of

the Product(s) will be free from material defects in workmanship and materials from the

date of original retail purchase of the Product(s) through Verizon Online for the period of one

year (“Warranty Period”), except as otherwise stated herein. Verizon Online’s sole obligation

shall be to repair or replace the defective hardware during the Warranty Period at no charge

to Customer or to refund the price at Verizon Online’s sole discretion. Such repair or

replacement will be provided by Verizon Online. The replacement hardware provided by

Verizon Online may not be new or have an identical make, model or part. Verizon Online may

in its sole discretion replace the defective hardware (or any part thereof) with any reconditioned

product that Verizon Online reasonably determines is substantially equivalent (or superior)

in all material respects to defective hardware. Repaired or replacement hardware will be

warranted for the remainder of the original Warranty Period from the date of the original

purchase from Verizon Online.

If a material defect is incapable of correction or if Verizon Online determines in its sole

discretion that it is not practical to repair or replace the defective hardware, the price paid by

Customer for the defective hardware will be refunded by Verizon Online upon return to

Verizon Online of the defective hardware. All hardware (or part thereof) that is replaced by

Verizon Online, or for which the purchase price is refunded, shall become the property of

Verizon Online upon replacement or refund. Limited Software Warranty: Verizon Online

passes on to Customer the warranty of the Licensor that the software portion of the Product

(“Software”) will substantially conform to the Licensor’s then current functional specifications

for the Software, as set forth in the applicable documentation, from the date of Customer’s

purchase of the Software for a period of ninety (90) days (“Software Warranty”) DIRECTLY OR

INDIRECTLY, TO THE LIMITED WARRANTY. Except as otherwise required by law, including

New York laws relating to consumer transactions, any cause of action or claim Customer

may have with respect to the Product must be commenced within one (1) year after the claim

or cause of action arises or such claim or cause of action is barred. Some states do not allow

exclusion or limitation of incidental or consequential damages or limitations on how long an

implied warrant lasts, so the foregoing limitations and exclusions may not apply. This Lim-

ited Warranty provides specific legal rights and the product owner may also have other rights

which vary from state to state.

may be reproduced in any form, by any means or used to make any derivative such as

translation, transformation or adaptation without permission from Verizon Online, as

stipulated by the United States Copyright Act of 1976. Contents are subject to change

is a Class B product. In a domestic environment, this Product may cause radio interference,

in which case the user may be required to take adequate measures. FCC Statement: This

Product has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This Product generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communication. However,

there is no guarantee that interference will not occur in a particular installation. If this

Product does cause harmful interference to radio or television reception, which can be

determined by turning the Product off and on, the Customer is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the Product and receiver.

• Connect the Product into an outlet on a circuit different from that to which the receiver

is connected.

• Consult Verizon Online or an experienced radio/TV technician for help.

• Return Product shall be packaged and shipped to Verizon Teleproducts, 400 Brandywine

Parkway, West Chester, PA 19380. The Customer is responsible for taking the package to

a UPS Ground or a common carrier, selected by Verizon Online, with shipping charges

prepaid.

What Is Not Covered: This Limited Warranty provided by Verizon Online does not cover Prod-

ucts, which in Verizon Online’s sole discretion, have been subjected to abuse, accident,

alternation, modification, tampering, negligence, misuse, faulty installation, lack of reason-

able care, repair of service in any way that is not contemplated in the documentation for the

Product or if the model or serial number has been altered, tampered with, defaced or re-

moved; Initial installation, installation and removal of the Product for repair and shipping

cost; Operational adjustments covered in the operating manual for the Product and normal

maintenance; Damage that occurs in shipment, due to an act of God, failures due to power

surge and cosmetic damage; Any hardware, software, firmware or other products or services

provided by anyone other than Verizon Online; Products that have been purchased from other

than Verizon Online; Repair by any party other than Verizon Online or as directed by Verizon

Online will void this Limited Warranty. Limitation of Liability: TO THE MAXIMUM EXTENT

PERMITTED BY LAW, VERIZON ONLINE IS NOT LIABLE UNDER ANY CONTRACT, NEGLI-

GENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF

USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER

DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED

TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOP-

PAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR

COMPUTER PROGRAMS TO WHICH THE PRODUCT IS CONNECTED WITH, LOSS OF

INFORMATION OR DATA CONTAINED IN, STORED ON OR INTEGRATED WITH ANY PROD-

UCT RETURNED TO VERIZON ONLINE FOR WARRANTY SERVICE) RESULTING FROM

THE USE OF THE PRODUCT RELATING TO WARRANTY SERVICE, OR ARISING OUT OF

ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF VERIZON ONLINE HAS BEEN AD-

VISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF

THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE

DEFECTIVE OR NON-CONFORMING PRODUCT. THE MAXIMUM LIABILITY OF VERIZON

ONLINE UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PROD-

UCT COVERED BY THE WARRANTY.

THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE

AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR

STATUTORY.

Governing Law: This Limited Warranty shall be governed by the laws of the State of New

York, without reference to its principles or conflicts of laws. CUSTOMER AND VERIZON

ONLINE CONSENT TO THE EXCLUSIVE PERSONAL JURISDICTION OF AND VENUE IN A

COURT LOCATED IN NEW YORK COUNTY, NEW YORK, FOR ANY SUITS OR CAUSES OF

ACTION CONNECTED IN ANY WAY, Period”), provided that the Software is properly installed

on approved hardware and operated as contemplated in its documentation. Verizon Online

further passes on to Customer the warranty of the Licensor that, during the Software Warranty

Period, the magnetic media on which the Licensor delivers the Software will be free of

physical defects

(10/11/04)

The Licensor’s sole obligation shall be to replace the non-conforming Software (or defective

media) with software that substantially conforms to the Licensor’s functional specifications

for the Software or to refund the purchase price for the Software at Verizon Online’s sole

discretion. The replacement Software is provided only to the original Customer and is sub-

ject to the terms and conditions of the license granted by the Licensor for the Software.

Software will be warranted for the Software Warranty Period set forth above from the date the

replacement Software is returned to Customer. If a material non-conformance is incapable

of correction, or if Verizon Online determines in its sole discretion that it is not practical to

replace the non-conforming Software, the price paid by the Customer for the non-conforming

Software will be refunded by Verizon Online; provided that the non-conforming Software (and

all copies thereof) is returned to Verizon Online. The license granted respecting any Software

for which a refund is given automatically terminates. Non-Applicability of Warranty: The

Limited Warranty provided hereunder for hardware and software Product will not be applied

to and does not cover any Product not purchased directly through and from Verizon Online.

Submitting a Claim: Customer may return the Product to Verizon Online based on its return

policy. In case the return policy period has expired and Product is within the Warranty Period,

Customer shall submit a claim to Verizon Online as outlined below, provided that only Cus-

tomer may submit a claim:

• Customer must submit with the Product as part of the claim a written description of the

hardware defect or Software non-conformance in sufficient detail to allow Verizon Online to

confirm the same.

• Customer must obtain a Return Authorization (“RA”) number from Verizon Online and, if

requested, provide written proof of purchase of Product (such as a copy of the dated purchase

invoice of the Product) before the warranty service is provided.

• Upon Customer’s request, Verizon Online will provide Customer with an RA and postage-

paid package for the original Product under warranty. No Cash on Delivery (“COD”) returns

are allowed.

• After an RA number is issued, the defective Product must be packaged securely in the

provided packing material, original or other suitable shipping package, to ensure that it will

not be damaged in transit, and the RA number must be prominently marked on the outside

of the package. All accessories and manuals must be included in the shipping package,

such as the power cord and Ethernet cable.

VDI-624

3/17/05

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of D-Link VDI-624 - AirPlus Xtreme G in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

D-Link VDI-624 - AirPlus Xtreme G Manual

Product: