768281
10
Zoom out
Zoom in
Previous page
1/130
Next page
8
EN đź’ˇThe car seat can also be used without the L.S.P. in use, if there is not
enough space in the vehicle.
REMOVAL FROM THE VEHICLE
1. Unlock the ISOFIX-Locking arms (5) on both sides by pressing the ISOFIX-
Release buttons (4) and at the same time pulling them back.
2. Pull out the car seat from the ISOFIX-Anchorage points (6).
3. Remove the car seat and slide the ISOFIX-Locking arms (5) completely
back into their transport positions.
4. Push the Load leg (3) back into its original position and then fold it in to
save space.
ADJUSTING THE HEADREST
The adjustable Headrest (13) can be adjusted by using the Headrest
adjustment handle (14) at the back of the Headrest (13). When adjusting the
headrest ensure that no more than 2 cm (approx. 2 finger's width) remain
between the child's shoulders and the headrest.
ROTATION FUNCTION
Pull the Position adjustment handle (15) on the front of the seat and bring it
into an upright position. Now you can turn the seat.
đź’ˇWe recommend to deactivate the L.S.P. before turning the seat.
Before starting your journey, make sure that the seat is properly locked into
place.
ADJUSTING THE RECLINE POSITION
To adjust the car seat to the desired recline position, press the Position
adjustment handle (15) on the front of the car seat.
đź’ˇWe recommend using the flattest lying position for children who are not yet
able to sit upright independently.
đź’ˇ Always make sure that the car seat audibly clicks into place when adjusting
it to either the lying or sitting position.
SECURING THE CHILD
1. Rotate the seat to the boarding position.
2. Press the Belt adjustment button (16) and pull both Shoulder belts (17) at the
same time to loosen them.
3. Undo the Belt buckle (18) by pressing the red button firmly.
4. The Buckle tongues (19) can now be attached to the indicated places on the
cover using the integrated loops.
5. Put your child in the car seat with their buttocks at the back.
6. Place the Shoulder belts (17) directly over your child’s shoulders.
7. Place both Buckle tongues (19) together and lock them in place in the Belt
buckle (18). You should hear an audible “CLICK”.
8. If you are using a seat with a SensorSafe Clip, push the clip closed until you
hear an audible “CLICK” and slide the closed clip down towards the Belt
buckle (18).
9. Tighten the Lap belts (20) and then pull on the Central adjustment belt (21)
to tighten the Shoulder belts (17) until they rest snug against your child's
body.
đź’ˇThe harness should be fitted tight enough so that it is not possible to put a
fold in any of the straps.
10. When using the SensorSafe clip, position the clip directly below the
shoulder pads.
REMOVING AND REATTACHING THE SEAT COVER
The car seat cover consists of 4 parts. These are fastened to the car seat
at several places. Once unfastened, the individual parts of the cover can be
removed. To reattach the cover, follow the removal instructions in the reverse
order.
💡The cover may only be washed at 30°C with a delicate wash program
otherwise it may result in discolouration of the cover fabric. Please wash
the cover separately from other laundry and do not dry it in the dryer or in
direct sunlight!
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cybex Sirona SX2 i-Size at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cybex Sirona SX2 i-Size in the language / languages: All languages as an attachment in your email.

The manual is 3,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info