768281

Cybex Sirona SX2 i-Size Manual

9
Zoom out
Zoom in
Previous page
1/130
Next page
7
EN
PRODUCT PARTS
Newborn inlay (1)
(separately available)
Size indicator (2)
Load leg (3)
ISOFIX-Release buttons (4)
ISOFIX-Locking arms (5)
ISOFIX-Anchorage points (6)
ISOFIX-Indicator (7)
Load leg adjustment button (8)
Load leg indicator (9)
Seat locking indicator (10)
Linear side-impact protection (L.S.P.)
(11)
L.S.P. Operating button (12)
Headrest (13)
Headrest adjustment handle (14)
Position adjustment handle (15)
Belt adjustment button (16)
Shoulder belt (17)
Belt buckle (18)
Buckle tongue (19)
Lap belts (20)
Central adjustment belt (21)
User guide compartment (22)
DIFFERENT USES OF THE SEAT
61 – 105 cm,
approx. 3 M – approx. 4 Y
max. 18 kg
76 – 105 cm,
> 15 M – approx. 4 Y
max. 18 kg
A Newborn inlay (1) can be purchased as a separate accessory and allows
for usage from 45 cm on. It should be removed if your child is taller than 60
cm. The Size indicator (2) shows the size your child must reach before it is
permitted to convert the seat for forward-facing use.
THE CORRECT POSITION IN THE VEHICLE
This is an i-Size Enhanced Child Restraint System. It is approved according
to UN Regulation No. R129/03, for use in i-Size compatible vehicle seating
positions as indicated by vehicle manufacturers in their vehicle user manuals.
If your vehicle does not have an i-Size seating position, please check the
enclosed vehicle Type List. You can obtain the most up-to-date version of the
Type List from www.cybex-online.com.
INSTALLATION IN THE VEHICLE
Always ensure that…
• the backrests in the vehicle are locked in their upright position.
• when installing the car seat on the front passenger seat, adjust the vehicle
seat as far back as possible.
1. Fold out the Load leg (3) until it locks into its foremost position.
2. Release the ISOFIX-Release buttons (4) to extend the ISOFIX-Locking
arms (5) on both sides.
💡The ISOFIX-Release buttons can both be released independently allowing
the ISOFIX-Locking arms to be adjusted independently.
3. Push the ISOFIX-Locking arms (5) out of the car seat to their furthest
extent.
4. Place the car seat on an appropriate seat in the vehicle.
5. Push the ISOFIX-Locking arms (5) into the ISOFIX-Anchorage points
(6) until these lock into place with an audible "CLICK". The two ISOFIX-
Indicators (7) will switch from RED to GREEN.
6. Ensure the car seat is secure by trying to pull it out of the ISOFIX-
Anchorage points (6).
7. Push the car seat towards the backrest of the vehicle seat until it is fully
aligned with the backrest.
💡Moving the car seat from side to side will also brace it against the vehicle
backrest.
8. Press the Load leg adjustment button (8) and extend the leg until it touches
the vehicle floor.
9. Pull the Load leg (3) out to the next locking position to ensure optimal force
transmission.
10. The Load leg indicator (9) switches to GREEN when the load leg is
correctly positioned on the vehicle floor.
11. In order to achieve the best possible protection, activate the Linear side-
impact protection (L.S.P.) (11) on the side of the car seat facing the vehicle
door. When taking the product out of the box, the Linear side-impact
protection (11) is activated on both sides of the seat. To close the L.S.P.
not facing the vehicle door, press the L.S.P Operating button (12), hold it
pressed and fold in the L.S.P with a slight push. Then, release the L.S.P.
Operating button.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cybex Sirona SX2 i-Size at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cybex Sirona SX2 i-Size in the language / languages: All languages as an attachment in your email.

The manual is 3,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info