Manual Cybex Pallas G i-Size (page 11 of 120) (All languages)

768274

Zoom out

Zoom in

1/120

SWITCH FROM IMPACT SHIELD (76 CM – 105 CM) TO THE VEHICLE

BELT (100 CM – 150 CM)

Remove the Impact Shield (g) as soon as your child is taller than 105 cm or

weighs more than 21 kg.

Open both Buckles of the Impact Shield (h) and remove the Impact Shield (g).

💡Note that using the seat without an impact shield is not permitted before



💡Keep the impact shield in a safe and secure place.

SECURING THE CHILD WITHOUT IMPACT SHIELD: 100 CM – 150 CM

1. Route the vehicle seat belt around your child and insert the belt tongue into

the belt buckle. It must lock into place with an audible “CLICK”.

2. Place the lap belt in the green coloured Lap Belt Guides (m) of the car seat.

3. Pull the shoulder belt to tighten the lap belt.

4. On the side of the car seat next to the belt buckle, the shoulder belt and the

lap belt must be inserted together in the Lap Belt Guide (m).

5. Feed the shoulder belt through the green Shoulder Belt Guide (e) until it is

inside the belt guide.

6. Ensure that the shoulder belt runs across your child’s clavicle and does not

touch your child’s neck. If necessary, adjust the height of the Adjustable

Headrest (b) to change the position of the belt.

ADJUSTING THE LYING POSITION

1. To put the seat in the lying position, press the Position Adjustment Button

(w) on the underside of the front area of the booster (c).

2. To return the seat from the lying position to the sitting position, press the

Position Adjustment Button (w) again and guide the seat upwards with light

pressure against the booster (c).

LINEAR SIDE-IMPACT PROTECTION (L.S.P.)

If the Linear Side-impact Protection (f)

󰀨

it. To do so, press the Side Impact Proctection Release Button (v). To reach

this button, the cover of the backrest needs to be removed. To reattach the

L.S.P. (f) to the seat, follow the removal instructions in the reverse order.

RECLINING HEADREST

The Reclining Headrest (y) helps to prevent the child’s head from dangerously

tipping forward during sleep.

It can be set to one of three positions.

Push the Reclining Headrest (y) forward until the desired position is reached.

💡The child’s head should always be in contact with the Reclining Headrest.

REMOVING AND REATTACHING THE SEAT COVER

The cover of the car seat consists of four parts (headrest, backrest, booster

and impact shield). These are held in position at several places by press studs

and elastic bands. Once all attachments have been released, the single parts

of the cover can be removed.

In order to put the covers back on the seat, follow the removal instructions in

the reverse order.

💡The cover may only be washed at 30 °C with a delicate wash program

otherwise it may result in discoloration of the cover fabric. Please wash

the cover separately from other laundry and do not dry in the dryer or in

direct sunlight!

WARRANTY AND DISPOSAL REGULATIONS

CYBEX GmbH (Riedingerstr. 18, 95448 Bayreuth, Germany) gives you

3 years warranty on this product. The warranty is valid in the country, where

this product was initially sold by a retailer to a customer. The contents of

the guarantee and all essential information required for the assertion of the

guarantee can be found on our homepage www.cybex-online.com. If a

warranty is shown in the article description, your legal rights against us for

󰀨

Please observe the waste disposal regulations in your country.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cybex Pallas G i-Size in the language / languages: All languages as an attachment in your email.

The manual is 3,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cybex Pallas G i-Size Manual

Product: