498399

Cybex PALLAS-FIX Manual

12
Zoom out
Zoom in
Previous page
1/84
Next page
INSTALLING OF THE CHILD SEAT WITH THE ISOFIX-CONNECT SYSTEM
The safety of your child will be increased using the ISOFIX-CONNECT system
linking the CYBEX PALLAS-fix tightly with the vehicle. Your child will still be
buckled up using the car’s three-point belt.
Note! The car’s ISOFIX anchorage points (j) are two metal rings per seat, located
between the backrest and the seat cushion of your vehicle seat. If in doubt please
refer to your vehicle owner’s manual.
Note! Make sure that the green safety indication (b) of the connectors is not visible. If
necessary, release them by pushing and simultaneously pulling back the red release
button (y). Repeat this procedure with the other connector.
Note! For additional information please refer to the section “SECURING THE CHILD”.
– Push both of the connectors (o) into the ISOFIX-CONNECT guides (u) until you hear
them clicking into the ISOFIX anchorage points (j).
– Make sure that the CYBEX PALLAS-fix is connected properly by trying to pull the
child seat out.
– The green safety indication (b) must be clearly visible on both sides of the red
release buttons (y).
– With the adjusting handle (c), located on the main frame (w) of the CYBEX PALLAS-
fix, you can now adjust the position of the child seat.
– You can now buckle up the child. Please refer to section “SECURING WITH SAFETY
CUSHION”.
– Connect the two enclosed ISOFIX-CONNECT guides (u) (longer parts pointing
upward) with the ISOFIX anchorage points (j). An opposite installation (longer parts
pointing downward) is also possible.
– Pull the adjusting handle (c), located under the seat cushion (d) on main frame
(w) of the CYBEX PALLAS-fix.
– Pull the connectors (o) as far out as they will go.
– Rotate the connectors (o) by 180° until they point into the direction of the ISOFIX-
CONNECT guides (u).
10
INSTALLATION DU SIEGE ENFAN T AVEC LE SYSTEME ISOFIX-CONNECT
La sécurité de votre enfant sera augmentée en utilisant le système ISOFIX-
CONNECT qui solidarise fortement le siège avec le véhicule. Votre enfant
restera attaché utilisant la ceinture trois-points du véhicule.
Note! Les points d‘ancrage ISOFIX du véhicule (j) sont deux anneaux métalliques par
siège, situés entre le dossier et l‘assise du siège du véhicule. En cas de doute, référez-
vous au manuel de votre véhicule.
Note! Assurez-vous que l‘indication de sécurité vert (b) des connecteurs n‘est pas
visible. Si nécessaire, les libérer en poussant et en tirant simultanément retour sur la
touche rouge (y). Répétez cette procédure avec l‘autre connecteur.
Note! Pour plus d‘information, veuillez vous référer à la section „ATTACHER L‘ENFANT“.
– Poussez les deux connecteurs (o) dans les guides ISOFIX-CONNECT (u) jusqu‘à ce
qu‘ils s‘enclenchent dans les points d‘ancrage ISOFIX (j).
– Assurez vous que le CYBEX PALLAS-fix est bien connecté en tirant dessus.
– L‘indication de sécurité vert (b) doit être clairement visible des deux côtés de les
boutons de déverrouillage rouge (y).
– Avec la poignée d‘ajustement (c), située sur l‘armature (w) du CYBEX PALLAS-fix ,
vous pouvez maintenant ajuster la position du siège enfant.
– Vous pouvez maintenant attacher l‘enfant. Veuillez vous référer à la section
„SECURISER AVEC LE BOUCLIER DE PROTECTION“.
– Connectez les deux guides ISOFIX-CONNECT (u) (parties plus longues vers le haut)
avec les points d‘ancrage ISOFIX (j). Une installation opposée (parties plus longues
vers le bas) est aussi possible.
– Tirez la poignée d‘ajustement (c) située sous l‘assise (d) sur l‘armature (w) du
CYBEX PALLAS-fix. -Tirez les connecteurs (o) aussi loin que possible.
– Tournez les connecteurs (o) de 180° jusqu‘à ce qu‘ils pointent ves les guides ISOFIX-
CONNECT (u)
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cybex PALLAS-FIX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cybex PALLAS-FIX in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 8,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info