690881
9
Zoom out
Zoom in
Previous page
1/46
Next page
Setting Up Dual Voltage Units for 220-240 Volt Operation
(See SPECIFICATIONS for a list of model numbers)
1 Remove the back cover.
Installation
Leveling
Position the brewer on the countertop. Level it left to right and
front to back by turning the bottom of the legs.
INSTALLATION INSTRUCTIONS II18
ALPHA, INSTALLATION INSTRUCTIONS 080619B
WARNING: Use the leveling legs to level the brewer
only. Do not use them to adjust brewer height. Do not
extend them higher than necessary.
Style
varies
Style
varies
Terminal
block
Strain
relief
or
Back
panel
WARNING: Do not connect the power cord to the
power supply until instructed to do so.
2 Loosen the strain relief on the back of the brewer.
3 Disconnect the existing power cord from the terminal
block and remove it.
4 Disconnect and cap the jumper wire between the “C” and
“N” terminals on the terminal block.
5 Feed the 220-240 Volt power cable through the strain
relief, into the brewer. The brewer may be wired for
connection directly to a junction box (if local ordinances
permit) or for use with a power plug that connects to an
electrical outlet meeting the brewer SPECIFICATIONS.
6 Connect the wires on the power cable to the terminal
block inside the brewer according to the ELECTRICAL
SCHEMATIC.
7 Tighten the strain relief and replace the back cover.
continued...
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Curtis G3 Series Alpha Decanter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Curtis G3 Series Alpha Decanter in the language / languages: English as an attachment in your email.

The manual is 4,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info