810366
311
Zoom out
Zoom in
Previous page
1/396
Next page
Miscellaneous situations
309
Changing the windscreen wiper blades
Note
The wiper arms can be moved into the re-
placement position when the front bonnet is
fully closed.
You can also use the service position, for
example, if you want to x a cover over the
windscreen in the winter to keep it clear of
ice.
Changing the wiper rear wiper
blades
Fig.197 Changing the windscreen wiper
blades
The windscreen wiper blades are supplied as
standard with a layer of graphite. This layer is
responsible for ensuring that the wipe is silent.
If the graphite layer is damaged, the noise of
the water as it is wiped across the windscreen
will be louder.
Check the condition of the wiper blades reg-
ularly. If the wipers scrape across the glass,
they should be changed if they are damaged,
or cleaned if they are dirty ››› .
If this does not produce the desired results,
the setting angle of the windscreen wiper arms
might be incorrect. They should be checked by
a specialised workshop and corrected if neces-
sary.
Damaged windscreen wiper blades should
be replaced immediately. These are available
from qualied workshops.
Raising and lowering windscreen wiper arms
Place the windscreen wipers in the service
position ›››page308.
Grip the wiper arms only by the blade's fas-
tening point.
Cleaning windscreen wiper blades
Raise the wiper arms.
Use a soft cloth to remove dust and dirt from
the windscreen wiper blades.
If the blades are very dirty, a sponge or damp
cloth may be used ››› .
Changing the windscreen wiper blades
Lift and unfold the wiper arms.
Press and hold release button ›››Fig.197
1 and pull gently on the wiper blade in the
direction of the arrow.
Fit a new wiper blade of the same length
and design on to the wiper arm and hook it
into place.
Rest the wiper arms back onto the wind-
screen.
Changing the rear window wiper blade
Separate the wiper arm from the rear win-
dow.
Remove the blade from the holder below the
centre. During this operation, hold the wiper
arm rmly.
Fit the new blade (of the same length and
type) into the housing of the wipe arm by
pressing it in place. When doing so, hold the
wiper arm by the upper end.
Fold the wiper arm and rest it on the window.
WARNING
Worn or dirty windscreen wiper blades re-
duce visibility and increase the risk of acci-
dent and serious injury.
Always replace damaged or worn wind-
screen wiper blades or blades that no longer
clean the windscreen properly.
311


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cupra Formentor - 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Formentor - 2022 in the language / languages: English as an attachment in your email.

The manual is 7.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Formentor - 2022

Cupra Formentor - 2022 User Manual - German - 415 pages

Cupra Formentor - 2022 User Manual - Dutch - 424 pages

Cupra Formentor - 2022 User Manual - French - 436 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info