Manual Cupra Formentor - 2020 (page 263 of 352) (English)

817289

263

Zoom out

Zoom in

1/352

Help with parking and manoeuvring

WARNING

The technology used in the park assist sys-

tem involves a series of limitations inherent

in the actual system and in the use of ultra-

sonic sensors. The use of Park Assist should

never tempt you to take any risk that may

compromise safety. The system is not a re-

placement for driver awareness.

●Any accidental movement of the vehicle

could result in serious injury.

●Adapt your speed and driving style at all

times to suit visibility, weather, road and

traffic conditions.

●Certain surfaces of objects and garments

do not reflect the ultrasound sensors' sig-

nals. The system cannot detect, at least

correctly, these objects or people wearing

such clothes.

●Ultrasound sensor signals may be affec-

ted by external sound sources. In certain

circumstances this may prevent them from

detecting people or objects.

●The ultrasound sensors may have blind

spots in which obstacles and people are not

detected.

●Monitor the area around the vehicle at all

times, since the ultrasound sensors do not

detect small children, animals or certain

objects in all situations.

WARNING

Quick turns of the steering wheel when

parking or exiting a parking space with Park

Assist can cause serious injury.

●Do not hold the steering wheel during

manoeuvres to park or exit a parking space

until the system requests it. Doing so disa-

bles the system during the manoeuvre, re-

sulting in the parking being cancelled.

CAUTION

●In certain circumstances, the ultrasonic

sensors do not detect objects such as trail-

er tongues, bars, fences, posts or thin trees,

or an open (or opening) rear lid, which

could damage the vehicle.

●Retrofitting of certain accessories to the

vehicle, such as a bicycle rack, may inter-

fere with the operation of the Park Assist

system and cause damage.

●The Park Assist system uses as a refer-

ence parked vehicles, curbs and other ob-

jects. Make sure that the tyres and wheels

are not damaged while parking. If necessa-

ry, opportunely interrupt the parking ma-

noeuvre to avoid damaging the vehicle.

●The ultrasound sensors on the bumper

may be damaged or shifted in the event of a

collision, for example, when entering or ex-

iting a parking space.

●If you use high-pressure or vapour equip-

ment to clean the ultrasound sensors, do

not apply it directly unless very briefly and

always from a distance of more than 10 cm.

●A registration plate or plate holder on the

front with larger than the space for the reg-

istration plate, or a registration plate that is

curved or warped can cause:

–False detections.

–The sensors to lose visibility.

–Cancellation of the parking manoeuvre

or defective parking.

●If one of the ultrasonic sensors is dam-

aged, the area corresponding to that group

of sensors (front or rear) is deactivated and

cannot be activated until the fault is cor-

rected. However, you can still use the sen-

sors of the other bumper as per usual. If

there is a fault in the system, consult a spe-

cialist workshop. To do so, CUPRA recom-

mends going to a specialised CUPRA dealer

or any SEAT dealership.

Note

●In order to guarantee good system opera-

tion, keep the ultrasound sensors of the

bumper clean, free of snow or ice, and do

not cover them with adhesives or other ob-

jects.

●Certain sources of noise, such as rough

asphalt or paving stones and the noise of

other vehicles can induce the Park Assist

system or ParkPilot to give erroneous warn-

ings. The presence of metal objects can al-

so affect the manoeuvre. »

261

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Formentor - 2020 in the language / languages: English as an attachment in your email.

The manual is 5.27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Formentor - 2020

Cupra Formentor - 2020 User Manual - German - 376 pages

Cupra Formentor - 2020 User Manual - French - 384 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cupra Formentor - 2020 Manual

Product: