817289
53
Zoom out
Zoom in
Previous page
1/352
Next page
Self-help
noise of the water as it is wiped across the
windscreen will be louder.
Check the condition of the wiper blades reg-
ularly. If the wipers scrape across the glass,
they should be changed if they are damaged,
or cleaned if they are dirty .
If this does not produce the desired results,
the setting angle of the windscreen wiper
arms might be incorrect. They should be
checked by a specialised workshop and cor-
rected if necessary.
Damaged windscreen wiper blades should
be replaced immediately. These are available
from qualified workshops.
Raising and lowering windscreen wiper
arms
Place the windscreen wipers in the service
position
page 50 .
Grip the wiper arms only by the blade's fas-
tening point.
Cleaning windscreen wiper blades
Raise the wiper arms.
Use a soft cloth to remove dust and dirt
from the windscreen wiper blades.
If the blades are very dirty, a sponge or
damp cloth may be used .
Changing the windscreen wiper blades
Lift and unfold the wiper arms.
Press and hold release button
Fig. 41 1
and pull gently on the wiper blade in the di-
rection of the arrow.
Fit a new wiper blade of the same length
and design on to the wiper arm and hook it
into place.
Rest the wiper arms back onto the wind-
screen.
Changing the rear window wiper blade
Separate the wiper arm from the rear win-
dow.
Remove the blade from the holder below
the centre. During this operation, hold the
wiper arm firmly.
Fit the new blade (of the same length and
type) into the housing of the wipe arm by
pressing it in place. When doing so, hold the
wiper arm by the upper end.
Fold the wiper arm and rest it on the win-
dow.
WARNING
Worn or dirty windscreen wiper blades re-
duce visibility and increase the risk of acci-
dent and serious injury.
Always replace damaged or worn wind-
screen wiper blades or blades that no lon-
ger clean the windscreen properly.
CAUTION
Damaged or dirty windscreen wipers
could scratch the glass.
If products containing solvents, rough
sponges or sharp objects are used to clean
the blades, the graphite layer will be dam-
aged.
Never use fuel, nail varnish remover,
paint thinner or similar products to clean
the windows.
In icy conditions, always check that the
wiper blades are not frozen to the glass be-
fore using the wipers. In cold weather, it
may help to leave the vehicle parked with
the wipers in service position
page 50.
CAUTION
To prevent damage to the bonnet and the
wiper arms, only leave them in the service
position.
Before driving, always lower the wiper
arms.
Jump start
Jump leads
The jump lead must have a sufficient wire
cross section. »
51
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cupra Formentor - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Formentor - 2020 in the language / languages: English as an attachment in your email.

The manual is 5.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Formentor - 2020

Cupra Formentor - 2020 User Manual - German - 376 pages

Cupra Formentor - 2020 User Manual - French - 384 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info