817294
313
Zoom out
Zoom in
Previous page
1/355
Next page
Wheels and tyres
313
Tyre pressure monitor system
Place the spare wheel or temporary spare
wheel into position.
Screw in the wheel bolts and tighten them a
little with the wheel wrench.
Use the appropriate adapter to tighten the
anti-theft wheel bolts.
Carefully lower the vehicle using the jack.
Use the wheel spanner to tighten all of the
wheel nuts clockwise. Tighten the bolts in di-
agonal pairs (not in a circle).
Put the caps, trim or full hubcap back on.
The wheel bolts should be clean and turn
easily. Before tting the spare wheel, inspect
the wheel condition and hub mounting surfa-
ces. These surfaces must be clean before t-
ting the wheel.
Tightening torque of the wheel nuts
The prescribed tightening torque for wheel
bolts for steel and alloy wheels is 140 Nm. After
changing a wheel, have the tightening torque
checked immediately with a torque wrench
that is working perfectly.
Before checking tightening torque, have any
rusty wheel bolts that are diicult to screw re-
placed and clean the wheel hub threads.
Never apply grease or oil to wheel bolts or to
the wheel hub threads. Even if the bolts have
been tightened to the prescribed torque, they
could come loose while driving.
Tyres with directional tread pattern
Tyres with directional tread pattern have been
designed to operate best when rotating in only
one direction. An arrow on the tyre sidewall
indicates the direction of rotation on tyres with
directional tread. Always observe the indicated
direction of rotation in order to guarantee op-
timum grip and help avoid aquaplaning, exces-
sive noise and wear.
If the tyre is mounted in the opposite direction
of rotation, drive with extreme caution, as the
tyre is no longer being used correctly. This is of
particular importance when the road surface is
wet. Change the tyre as soon as possible or re-
mount it with the correct direction of rotation.
Works after changing a wheel
Replace the hub caps or wheel bolt caps (de-
pending on equipment).
Return all tools to their proper storing loca-
tion.
If the replaced wheel does not t in the spare
wheel housing, store it safely in the luggage
compartment ›››page247.
Check the tyre pressure of the newly moun-
ted tyre as soon as possible.
In vehicles tted with a tyre pressure indica-
tor, adjust the pressure and store it in memory
›››page313.
Have the tightening torque of the wheel nuts
checked as soon as possible with a torque
wrench ›››page312. Meanwhile, drive care-
fully.
Have the at tyre replaced as quickly as pos-
sible.
Tyre pressure monitor sys-
tem
Tyre pressure monitor indicator
Fig.213 Instrument panel: warning of loss
of tyre pressure.
The tyre pressure monitoring system compares
the individual speeds of each wheel and thus
the dynamic radius with the help of the ABS
sensors.
If the rolling circumference of one or more
wheels has changed, the tyre pressure moni-
toring indicator will indicate this on the instru-
313


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cupra Ateca 2023 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Ateca 2023 in the language / languages: English as an attachment in your email.

The manual is 14.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Ateca 2023

Cupra Ateca 2023 User Manual - German - 387 pages

Cupra Ateca 2023 User Manual - French - 390 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info